Product successfully added to your shopping cart
MACX MCR-EX-SL-RPSSI-I
2865340
PHOENIX_CONTACT
1
Power/input isolating amplifier
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2865340 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 140 (C-5-2017) |
GTIN | 4046356160353 |
Weight per Piece (excluding packing) | 160.000 g |
Custom tariff number | 85437090 |
Country of origin | DE (Germany) |
Ambient temperature (operation) | -20 °C ... 60 °C (Any mounting position) |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Maximum altitude | ≤ 2000 m |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
Signal input | Active current input, intrinsically safe |
---|---|
Current input signal | 4 mA ... 20 mA |
Transmitter supply voltage | > 16 V (20 mA) |
> 15.3 V (22.5 mA) | |
Underload/overload signal range | 0 mA ... 24 mA (Extended transmission range for diagnostics) |
Polarization and surge protection | Yes |
Signal input | Passive current input, intrinsically safe |
Current input signal | 0 mA ... 20 mA |
4 mA ... 20 mA | |
Voltage drop | < 3.5 V (in input isolating amplifier operation) |
Underload/overload signal range | 0 mA ... 24 mA (Extended transmission range for diagnostics) |
Signal output | Current output (active and passive) |
---|---|
Current output signal | 4 mA ... 20 mA (active) |
4 mA ... 20 mA (14 ... 26 V ext. source voltage) | |
Transmission Behavior | 1:1 to input signal |
Load/output load current output | < 1000 Ω (20 mA) |
< 825 Ω (24 mA) | |
Output ripple | < 20 mVrms |
Output behavior in the event of an error | 0 mA (Cable break in the input) |
≥ 22.5 mA (Cable short-circuit in the input) | |
Signal output | Current output (active and passive) |
Current output signal | 0 mA ... 20 mA (active) |
4 mA ... 20 mA (active) | |
0 mA ... 20 mA (14 ... 26 V ext. source voltage) | |
4 mA ... 20 mA (14 ... 26 V ext. source voltage) | |
Transmission Behavior | 1:1 to input signal |
Load/output load current output | < 1000 Ω (20 mA) |
< 825 Ω (24 mA) | |
Output ripple | < 20 mVrms |
Output behavior in the event of an error | 0 mA (Cable break in the input) |
0 mA (Cable short-circuit in the input) |
Designation | Repeater power supply operation |
---|---|
Nominal supply voltage | 24 V DC |
Supply voltage range | 19.2 V DC ... 30 V DC (24 V DC -20%...+25%) |
Max. current consumption | < 76 mA (24 V DC / 20 mA / 1000 ) |
Power dissipation | < 1.1 W (24 V DC / 20 mA / 1000 ) |
Power consumption | < 1.8 W (20 mA / 1000 ) |
Designation | Signal conditioner operation |
Nominal supply voltage range | 19.2 V DC ... 30 V DC (24 V DC -20%...+25%) |
Max. current consumption | < 44 mA (24 V DC / 20 mA / 1000 ) |
Power dissipation | < 0.75 W (24 V DC / 20 mA / 1000 ) |
Conductor cross section solid min. | 0.2 mm² |
---|---|
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 7 mm |
Screw thread | M3 |
Connection method | Screw connection |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
No. of channels | 1 |
---|---|
Maximum transmission error | < 0.1 % (of final value) |
Transmission error, typical | < 0.05 % (of final value) |
Maximum temperature coefficient | < 0.01 %/K |
Temperature coefficient, typical | < 0.004 %/K |
Step response (10-90%) | < 200 µs (for jump 4 mA ... 20 mA, load 600 Ω) |
< 600 µs (for jump 0 mA ... 20 mA, load 600 Ω) | |
Status display | Green LED (supply voltage) |
Flammability rating according to UL 94 | V0 |
Degree of pollution | 2 |
Overvoltage category | II |
Electromagnetic compatibility | Conformance with EMC directive |
Interference emission | EN 61000-6-4 |
Housing material | PA 6.6-FR |
Color | gray |
Designation | Input/output/power supply |
Electrical isolation | 300 Vrms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) |
2.5 kV (50 Hz, 1 min., test voltage) | |
Designation | Input/output |
Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
Designation | Input/power supply |
Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
Conformance | CE-compliant, additionally EN 61326 |
ATEX | II (1) G [Ex ia Ga] IIC |
II (1) D [Ex ia Da] IIIC | |
II 3 (1) G Ex nA [ia Ga] IIC T4 Gc | |
I (M1) [Ex ia Ma] I | |
IECEx | [Ex ia Ga] IIC |
[Ex ia Da] IIIC | |
Ex nA [ia Ga] IIC T4 Gc | |
[Ex ia Ma] I | |
UL, USA/Canada | UL 61010 Listed |
Class I Div 2; IS for Class I, II, III Div 1 | |
SIL | 2 |
Integrity requirement | IEC 61508 - Low demand |
---|---|
Equipment type | Type A |
Safety Integrity Level (SIL) | 2 |
Safe Failure Fraction (SFF) | 90.7 % |
λSU | 4.867 x 10-7(486.7 FIT) |
λSD | 0 |
λDU | 5 x 10-8(50 FIT) |
λDD | 0 |
Probability of a hazardous failure on demand (PFDAVG) | 2.40 x 10-4(1 year) |
4.76 x 10-4(2 years) | |
7.13 x 10-4(3 years) | |
9.50 x 10-4(4 years) | |
11.9 x 10-4(5 years) | |
Diagnostic coverage (DC) | DCS=0 %, DCD=0 % |
Integrity requirement | IEC 61508 - High demand |
Equipment type | Type A |
Safety Integrity Level (SIL) | 2 |
Safe Failure Fraction (SFF) | 90.7 % |
λSU | 4.867 x 10-7(486.7 FIT) |
λSD | 0 |
λDU | 5 x 10-8(50 FIT) |
λDD | 0 |
Probability of a hazardous failure per hour (PFHD) | 4,99 x 10-8 |
Diagnostic coverage (DC) | DCS=0 %, DCD=0 % |
Operation | Repeater power supply operation |
---|---|
Max. output voltage Uo | 25.2 V |
Max. output current Io | 93 mA |
Max. output power Po | 587 mW |
Group | IIC |
Max. external inductivity Lo | 2 mH |
Max. external capacity Co | 107 nF |
Group | IIB |
Max. external inductivity Lo | 4 mH |
Max. external capacity Co | 820 nF |
Safety-related maximum voltage Um | 253 V AC (125 V DC) |
Operation | Signal conditioner operation |
Input voltage Ui | ≤ 30 V |
Input current Ii | ≤ 150 mA |
Max. internal inductance Li | negligible |
Max. internal capacitance Ci | negligible |
Designation | Electromagnetic RF field |
---|---|
Standards/regulations | EN 61000-4-3 |
Typical deviation from the measuring range final value | 1 % |
Designation | Fast transients (burst) |
Standards/regulations | EN 61000-4-4 |
Typical deviation from the measuring range final value | 1 % |
Designation | Conducted interferences |
Standards/regulations | EN 61000-4-6 |
Typical deviation from the measuring range final value | 1 % |
Electromagnetic compatibility | Conformance with EMC directive |
---|---|
Noise emission | EN 61000-6-4 |
Designation | Electromagnetic RF field |
Standards/regulations | EN 61000-4-3 |
EN 61000-4-4 | |
Designation | Conducted interferences |
Standards/regulations | EN 61000-4-6 |
Flammability rating according to UL 94 | V0 |
Conformance | CE-compliant, additionally EN 61326 |
ATEX | II (1) G [Ex ia Ga] IIC |
II (1) D [Ex ia Da] IIIC | |
II 3 (1) G Ex nA [ia Ga] IIC T4 Gc | |
I (M1) [Ex ia Ma] I | |
IECEx | [Ex ia Ga] IIC |
[Ex ia Da] IIIC | |
Ex nA [ia Ga] IIC T4 Gc | |
[Ex ia Ma] I | |
UL, USA/Canada | UL 61010 Listed |
Class I Div 2; IS for Class I, II, III Div 1 | |
DNV GL-Temperature | B |
DNV GL-Humidity | B |
DNV GL-Vibration | A |
DNV GL-EMC | A |
DNV GL-Enclosure | Required protection according to the Rules shall be provided upon installation on board |
Group | IIC |
IIB |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PHOENIX CONTACT-2865340-MACX MCR-EX-SL-RPSSI-I | 157 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.