No products
Product successfully added to your shopping cart
View larger
CSS 0.75-3/3 1201695 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and rev..
CSS 0.75-3/3
1201695
PHOENIX_CONTACT
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.75 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input
Home > PHOENIX CONTACT
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Related products
▲More info
▲| Product Type | Speed Starters |
| Product Family | CONTACTRON |
| Operation Elements | Button |
| Rotary switch | |
| Insulation Properties | |
| Degree of pollution | 2 |
| Number of phases | 3 |
| Net | |
| Number of phases | 3 |
| Input voltage | 380 V AC |
| 400 V AC | |
| 480 V AC | |
| Input Voltage Range | 220 V AC ... 480 V AC -15% ... +10% |
| Frequency Range | 47 Hz ... 63 Hz |
| Nominal current | 2.8 A (without mains inductance) |
| 2.4 A (with mains inductance) | |
| Nominal motor power | 0.75 kW |
| Apparent power | 1.7 kVA |
| Rated Output Current (IN) | 2.5 A (4 kHz) |
| 1.8 A (8 kHz) | |
| 1 A (16 kHz) | |
| Output Frequency | 0 Hz ... 500 Hz |
| Dissipated Power | 28 W (2 kHz) |
| 34 W (4 kHz) | |
| 32 W (8 kHz) | |
| 31 W (16 kHz) | |
| 9 W (Stand-By) | |
| Output current | ≤ 3.75 A (180 sec) |
| ≤ 1.875 A (180 s, during recovery time) | |
| ≤ 4.5 A (15 sec) | |
| ≤ 1.25 A (15 s, during recovery time) | |
| Recovery Time | 150 s (180 sec) |
| 12 s (15 s) | |
| Overload Time | 30 sec (180 sec) |
| 3 s (15 s) | |
| Discharge Time | 3 min. (Intermediate Circuit Capacitors) |
| Commute | |
| Denomination Output | Relay Output |
| Contact Switching Type | 1 switch |
| Maximum Switching Voltage | 125 V AC |
| 30 V DC | |
| Maximum connection current | 3 A |
| Minimum Shut-Off Current | 10 mA (5 V DC) |
| AWG Conductor Section | (Converted according to IEC) |
| Power terminals | |
| Connection type | Push-in connection |
| Length to be de-insulated | 10 mm |
| Rigid conductor section | 0.2 mm² ... 6 mm² |
| Flexible conductor section | 0.2 mm² ... 6 mm² |
| 0.2 mm² ... 4 mm² (with toe cap) | |
| AWG Conductor Section | 24 ... 10 |
| Control Modules | |
| Connection type | Push-in connection |
| Length to be de-insulated | 10 mm |
| Rigid conductor section | 0.2 mm² ... 1.5 mm² (with toe cap) |
| Flexible conductor section | 0.2 mm² ... 1.5 mm² |
| 0.2 mm² ... 0.75 mm² | |
| AWG Conductor Section | 24 ... 16 |
| Orifice | |
| Diameter | 5.5 mm |
| Width | 45 mm |
| Height | 210 mm |
| Depth | 190 mm |
| Longitude | ≤ 50 m (Motor cable length (EMC conformity category C2)) |
| ≤ 50 m (Motor cable length (EMC conformity category C3)) | |
| ≤ 50 m (Motor cable length (non-EMC compliant)) | |
| Environmental conditions | |
| Protection Rating (IP) | IP20 |
| Protection Rating (NEMA) | NEMA 1 |
| Ambient Temperature (Service) | -20 °C ... 55 °C (no current derating) |
| -20 °C ... 60 °C (with linear current derating) | |
| Ambient Temperature (Storage/Transport) | -25 °C ... 85 °C |
| Altitude | ≤ 2000 m |
| > 2000 m (with derating) | |
| Permissible air humidity (service) | 90% (non-condensing) |
| Permissible air humidity (storage/transport) | 95% (non-condensing) |
| Crashes (in service) | 15g, 11ms |
| Vibration (in service) | 0.075 mm / 1g |
| Air Pressure (Service) | 86 kPa ... 106 kPa |
| Air Pressure (Storage/Transport) | 70 kPa ... 106 kPa |
| Safety Integrity Level (SIL, IEC 61800-5-2) | |
| Marked | 3 |
| Performance Level (EN ISO 13849) | |
| Marked | and |
| Category (ISO 13849) | |
| Marked | 4 |
| Standards/Specifications | IEC 61800-5-1 |
| IEC 61800-3 |
| Type of mounting | Rail mounting |
| Wall Mounting |
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.