AXL F AI4 U XC 1H 2702008 PHOENIX CONTACT Axioline F analog input module, extreme conditions version, 4 inpu.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

AXL F AI4 U XC 1H 2702008 PHOENIX CONTACT Axioline F analog input module, extreme conditions version, 4 inpu..

AXL F AI4 U XC 1H

2702008

PHOENIX_CONTACT

Axioline F analog input module, extreme conditions version, 4 inputs: 0 - 5 V, ±5 V, 0 - 10 V, ±10 V, 2, 3, and 4-conductor connection technology, integrated sensor supply (including bus base module and plugs)

More details


Programmable Logic Controllers Plcs

AUTOMATION Industrial Automation - PHOENIX CONTACT

I/O systems - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article is obsolete. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

Related products

More info



Product description

The module is designed for use within an Axioline F station.

It is used to acquire analog voltage signals.

Dimensions

Width35 mm
Height126.1 mm
Depth54 mm
Note on dimensionsThe depth is valid when a TH 35-7.5 DIN rail is used (according to EN 60715).

Ambient conditions

Ambient temperature (operation)-25 °C ... 60 °C (Standard)
-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP20

Connection data

DesignationAxioline F connector
Connection methodPush-in connection
Note on connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.1.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.1.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.16
Stripping length8 mm

General

Net weight215 g
Note on weight specificationswith connectors and bus base module
Mounting typeDIN rail

Interfaces

DesignationAxioline F local bus
Connection methodBus base module
Transmission speed100 MBit/s

Power supply for module electronics

Module electronics and sensorsSensor supply UiS
DesignationSensor supply UiS
Supply voltage24 V DC (from UA)
Current consumptionmax. 50 mA (per channel)

Axioline potentials

Communications power UBus5 V DC (via bus base module)
Current consumption from UBustyp. 120 mA
max. 150 mA
Supply for analog modules UA24 V DC (I/O supply and sensor supply)
Current consumption from UAtyp. 38 mA (IiS = 0 mA)
max. 45 mA (IiS = 0 mA)
typ. 118 mA (IiS = 4 x 20 mA (nominal load))
max. 125 mA (IiS = 4 x 20 mA (nominal load))
typ. 238 mA (IiS = 4 x 50 mA (full load))
max. 245 mA (IiS = 4 x 50 mA (full load))

Analog inputs

Number of inputsmax. 4 (differential inputs, voltage)
Connection methodPush-in connection
2, 3, 4-wire (shielded)
Input nameAnalog inputs
A/D conversion time31.25 µs
Resolution A/D16 bit
Limit frequency (3 dB)30 Hz
12 kHz
Type of protectionTransient protection of inputs
Protective circuit/componentSuppressor diode
Data formatsIB IL, S7-compatible
Measured value representation16 bits (15 bits + sign bit)
Voltage input signal0 V ... 5 V
-5 V ... 5 V
0 V ... 10 V
-10 V ... 10 V
Precision0.1 % (of measuring range final value for active mean-value generation and 30 Hz filter)
Input filter30 Hz, 12 kHz and mean-value generation (can be parameterized)
Number of inputs4 (differential inputs, voltage)
Type of protectionOverload protection
Protective circuit/component±30 V DC, maximum
Open circuit responseGoes to 0 V
Voltage input signal0 V ... 5 V
-5 V ... 5 V
0 V ... 10 V
-10 V ... 10 V
Input resistance of voltage input268 kΩ (typical)
Common mode voltage range signal - ground-50 V DC ... 50 V DC

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2702008-AXL F AI4 U XC 1H English 170 Kbytes PHOENIX CONTACT-2702008-AXL F AI4 U XC 1H

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.