Z Limit switches
Limit switch with basic plastic housing
The Z series of basic switches in plastic housing provide the same electrical and
mechanical switching capability and lifetime as standard limit switches. But with
the basic plastic housing the basic switches are an ideal solution with best value for money for uncritical environments or when separately encased in subassemblies.
• Cost efficient basic plastic housingfor subassemblies
• Same electrical and mechanical switching ratings as standard limit switches
Solder terminalScrew terminal
Pin plungerZ-15GZ-15G-B Short spring plunger Z-15GDZ-15GD-B Leaf springZ-15GL Z-15GL-B Reverse hinge lever Z-15GM Z-15GM-B Reverse hinge roller lever Z-15GM2Z-15GM2-B Plunger with M12 mounting Z-15GQZ-15GQ-B Hinge leverZ-15GW Z-15GW-B
Hinge roller leverZ-15GW2Z-15GW2-B
*1Other actuator types are available. For the full range refer to the complete datasheet.
*2Contacts are directly accessible. Additional protective measures are required e.g. order covers from accessories.
Rated voltageNon-inductive load Inductive load
Resistive loadLamp loadInductive loadMotor load
NC NONC NONC NONC NO
125 VAC 15A3 A 1.5 A 15A5A2.5A
250 VAC15 A 2.5 A 1.25 A 15 A 3 A 1.5 A
8 VDC 15A3 A 1.5 A 15A5A2.5A
14 VDC 15A3 A 1.5 A 10A5A2.5A
30 VDC 6A3 A 1.5 A 5A5A2.5A
125 VDC 0.5 A*1
0.5 A 0.5 A 0.05 A0.05 A 0.05 A
*1For switching high currents at high voltages (e.g. 10A at 125VDC) contact yourOMRON representative.
DurabilityMechanical 10,000,000 operations min.
Electrical500,000 operations min. Operating speedPlunger 0.01 mm to 1 m/s Operating frequency Mechanical 240 operations/min
Ambient temperatureOperating–25 to 80°C (with no icing)
Degree of protectionIP00
Z Limit switches
Terminal covers (protection of electrical contacts against accidental contact of e. g. fingers)
Type MaterialOrder code
for soldering terminal models for screw terminal models
Cover with 5 thinner parts (plastic type) or holes (metal type) as plastic AP-AAP-B
cable exit positions. Protective cover is fixed to basic switch with mounting screws of basic switch.
Cover with bottom cable exit AP-Z