Display - Type
Color display, TFT, anti-glare
Screen diagonal
7
widescreen Inch
Resolution
WSVGA
1024 x 600 Pixel
Visible screen area
153.6 x 90.0 mm
Number of colours
16777216 (Color depth 24 bit)
Contrast ratio (Normally)
Normally 850:1
Brightness
Normally 400 cd/m2
Back-lighting
LED
dimmable via software
Service life of back-lighting
Normally 50000 h
Technology
Projected Capacitive Touch (PCT)
Touch sensor
Multi-touch touch panel
Processor
ARM Cortex-A9 800 MHz
Internal memory
DRAM: 512 MB RAM
Flash: 1GB SLC
NVRAM: 128kB Retain
External memory
SD card, Type: SDSC, SDHC
Cooling
Fanless CPU and system cooling, natural convection-based passive cooling
Back-up of real-time clockBattery (service life)
non-replaceable, BR2330 soldered in
Back-up of real-time clockBackup (time at zero voltage)
Normally 10 years
Visualisation software
GALILEO
XSOFT-CODESYS
PLC-Programming software
XSOFT-CODESYS-2
XSOFT-CODESYS-3
Target and web visualization
Yes
PLC-licence
PLC licence inclusive
Operating system
Windows Embedded Compact 7 Pro
Interfaces, communication
built-in interfaces
2 x Ethernet 10/100 Mbps
1 x RS232
1 x RS485
1 x USB host 2.0
1 x USB device
1 x CANopen®/easyNet
1 x SmartWire-DT
USB Host
USB 2.0, not galvanically isolated
USB device
USB 2.0, not galvanically isolated
RS-232
Not galvanically isolated, 9-pin D-sub plug, UNC
RS-485
Not galvanically isolated, 9-pin D-sub plug, UNC
CAN
Not galvanically isolated, 9-pin D-sub plug, UNC
Nominal voltage
24 V DC SELV (safety extra low voltage)
permissible voltage
Effective: 19.2-30.0 V DC (rated operating voltage -20%/+25%)
Absolute with ripple: 18,0-31,2 V DC
Battery powered: 18,0-31,2 V DC (rated operating voltage -25%/+30%)
35 V DC for a duration of < 100 ms
Voltage dips
≤ 10 ms from rated voltage (24 V DC)
5 ms from undervoltage (19.2 V DC) ms
Power consumption [Pmax.]
14.4 W
Power consumption
Normally 14 W
Note on heat dissipation
Heat dissipation with power consumption for 24 V
11.9 W for basic device + 2.5 W for USB module
Protection against polarity reversal
yes
Type of fuse
Yes (fuse not accessible)
Housing material
Insulated material black
Front type
Anti-glare tempered glass in plastic bezel
Dimensions (W x H x D)
196 x 135 x 51 mm
flush mounted
Clearance: W x H x D ≥ 30 mm (1.18")
Inclination from vertical: ±45° (if using natural convection)
Degree of protection (IEC/EN 60529, EN50178, VBG 4)
IP65 (in the front as per EN 60529-1), IP20 (on rear as per EN 60529-1)
NEMA 4X
NEMA12 (as per NEMA 250-2003)
ApprovalsApprovals
cUL 61010-2-201
Approvalsshipping classification
DNV GL
Applied standards and directivesEMC
2004/108/EEC
Applied standards and directivesEmitted interference
IEC/EN 61000-6-4
Applied standards and directivesInterference immunity
IEC/EN 61000-6-2
Applied standards and directivesProduct standards
EN50178/IEC/EN 61131-2
Mechanical shock resistance
15g / 11ms g
Vibration
5...9 Hz +- 3.5 mm
9...60 Hz +- 0.15 mm
60…150 Hz ± 2 g
Free fall, packaged
IEC/EN 60068-2-31 m
Climatic environmental conditionsClimatic proofing
Cold to EN 60068-2-1
Dry heat to IEC 60068-2-2
Damp heat as per EN 60068-2-3
Climatic environmental conditionsAir pressure (operation)
795 - 1080 hPa
TemperatureStorage / Transport [ϑ]
-20 - +60 °C
TemperatureOperating ambient temperature min.
0 °C
TemperatureOperating ambient temperature max.
+50 °C
Relative humidityCondensation
Non-condensing
Relative humidityRelative humidity
10 - 95%, non-condensing
Rated operational voltage [UAux]
24 V DC (-15/+20%) V
Residual ripple on the input voltage
≦ 5 %
Protection against polarity reversal
Yes
Note
If contactors with a total power consumption > 3 A are connected, a power feeder module EU5C-SWD-PF1/2 has to be used.
Short-circuit rating
no, external fuse FAZ Z3
Rated operating voltage of 24-V-DC slaves
typ. UAux- 0.2 V
Supply voltage [UPow]
24 DC -15 % + 20 % V
Input voltage ripple
≦ 5 %
Protection against polarity reversal
yes
Inrush current and duration
12.5 A/6 ms A
Heat dissipation at 24 V DC
1.0 W
Potential isolation between UPowand 15 V SmartWire-DT supply voltage
No
Bridging voltage dips
10 ms
SmartWire-DT supply voltage
Rated operating voltage [Ue]
14.5 ± 3 % V
Note
If SmartWire-DT modules with a total power consumption > 0.7 A are connected, a power feeder module EU5C-SWD-PF2 has to be used.
Connection supply voltages
Connection type
Push in terminals
Flexible with ferrule
0.25 - 1.5 mm2
UL/CSA solid or stranded
24 - 16 AWG
Station type
SmartWire-DT master
Number of SmartWire-DT slaves
99
Address allocation
automatic
Status indication
SmartWire-DT master LED: red/green
Configurations LED: red/green
Plug connector
Blade terminal SWD4-8MF2