SN3-050-EU8 100643 EATON ELECTRIC Switched-mode power supply unit, 24-28VDC, adjustable, 5A View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

SN3-050-EU8 100643 EATON ELECTRIC Switched-mode power supply unit, 24-28VDC, adjustable, 5A

SN3-050-EU8

100643

EATON-MOELLER

Switched-mode power supply unit, 24-28VDC, adjustable, 5A

More details


Home > EATON - MOELLER

* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Delivery program
Product range
SN3 switched-mode power supply units
Description
Primary pulsed power supply, power reserve from up to 50 %
Up to 5 devices can be paralleled to increase power and for redundancy
Phases
Single-phase
Input voltage range
85 - 264 V AC
100 - 350 V DC
Instructions
At ≧ 264 V DC additionally suitable, use fuse.
Nominal input voltage
110 - 240 V DC
110 - 240 V DC
Rated output voltage
24 V DC (-1/5%)
Rated output current
A 5
Setting range for the output voltage
22 - 28 V DC
Rated output power
W 120
For use with
easy…
MFD…
EC4P…
XC-CPU…
XIOC…
PS4…
Technical data
General
Standards
EN 61204, 2006/95/EC, 2004/108/EC, EN 50178, EN 60950, UL 60950, UL 508, SELV (EN 60950)
Degree of protection
Enclosures
IP20
Terminals
IP20
Protection class
according to EN 61140, Class 1
Mounting
DIN rail (IEC/EN 60715), snap fixing
Mounting position
Horizontal
Heat dissipation
W part no. ≦ 15
Efficiency
% 88
Weight
kg 0.96
Minimum distance to adjacent devices
mm horizontal 10, vertical 80
Terminal capacities
Only operate plug-in terminals off load.
Input circuit
Flexible with ferrule
mm2 0.2…2.5 (22…14 AWG)
Flexible without ferrule
mm2 0.2…2.5 (22…14 AWG)
Massive
mm2 0.2…2.5 (22…14 AWG)
Output circuit
Flexible with ferrule
mm2 0.12…2.5 (26…14 AWG)
Flexible without ferrule
mm2 0.12…2.5 (26…14 AWG)
Massive
mm2 0.12…2.5 (26…14 AWG)
Environmental compatibility
Ambient temperature, operation
°C -25 - +70
Ambient temperature, full load
°C 0 - +60 (without derating)
Ambient temperature, storage
°C - 40 - + 85
Climatic proofing
to IEC 60068-2-3, 93% at +40 °C, no condensation
Overvoltage category/pollution degree
according to EN 50178; 2
Climatic class (IEC)
according EN 60721; 3K3
Vibrations (IEC/EN 60068-2-6)
1…57 Hz, amplitude ±0.075 mm; 57…100 Hz, 5 g
Mechanical shock resistance (IEC 60068-2-27)
30 g all directions
Insulation voltage
Inputs/outputs
3 kV AC (type test), 1.2 kV AC (routine test)
Input
1.5 kV AC (type test), 1.2 kV AC (routine test)
Output
350 V AC (routine test)
Electromagnetic compatibility (EMC)
Interference immunity
EN 61000-6-2
ESD
Air/contact discharge kV according to EN 61000-4-2, level 4-8KV/15KV
RFI
according to EN 61000-4-3, level 3-10 V/m
Burst
according to EN 61000-4-4, level 4-4 KV
Surge
according to EN 61000-4-5, level 4-2KV symmetrical, Level 3-3KV asymmetrical
Cable-born HF
according to EN 61000-4-6, level 3-10 V
Emitted interference
EN 61000-6-3
Electromagnetic fields
(0.08…1) / (1,4…2) / (2…2,7) GHz V/m according to EN 55022, Class B
Cable-born HF
according to EN 55022, Class B
Input circuit
Supply frequency
Rated value
Hz 50/60
Range
Hz 47 - 63
Current consumption
At 110 … 240 V AC
A Approx. 2.2…1.2
Power consumption
W Normally 135
Inrush current limiter/i2t (cold start)
≦ 23 A / ca. 0.9 A2s
Mains failure bridging
ms typ. ≧ 100
Run-up time after mains voltage applied
ms Normally ≧ 100
Transient overvoltage protection
Varistors
Internal input fuse (device protection, not accessible)
4 AT
Discharge current to PE
mA < 3.5 mA
Output circuit
L+, L+, L-, L-
Proof against short-circuit, no-load and overload
Rated output power
W 120
Rated output current Tu≦ 60 °C
A 5
Peak output current (power reserves) Tu ≦ 40 °C
A Normally ≦ 7.25
Derating 60 °C ≦ Tu≦ 70 °C
2.5 % per Kelvin temperature increase
Control deviation at
Load change 10…90 %, static
Normally ±0.05 %
Load change 10…90 %, dynamic
Normally ±3 %
Controller acting time
ms Normally 1
Input voltage deviation ±10 %
Normally ±0.05 %
Rise time 10…90 %
ms Normally ≦ 30
Residual ripple and switching peaks
20 MHz typically < 50 mVss
Can be switched in parallel
yes, up to 5 devices for redundancy and for power increase, non symetrical current
Series connection capability
yes, for voltage increase (max. 2 off)
Resistance to reverse feed
yes, limited to approx. 35 V AC
Power factor correction (PFC)
Yes
Status indication
OUTPUT OK: LED green
Overload characteristics
→ AWA2727-2318 (www.moeller.net/support)
Behaviour on short-circuit
continuously with current limitation
Current limitation at short-circuit
A Approx. 11
Short-circuit protection
Proof against sustained short circuit
Overload protection
thermal protection
Capacitive load starting
Not restricted
Notes


At U ≧ 264 V DC additionally suitable, use external fuse.

Technical data ETIM 5.0(Show features)(Hide features)
PLC's (EG000024) / PLC system power supply (EC000599)
Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / SPS system power supply (ecl@ss8-27-24-22-09 [AKE532010])
Input voltage at AC 50 Hz
V 85 - 264
Input voltage at AC 60 Hz
V 85 - 264
Input voltage at DC
V 100 - 350
Type of voltage (input voltage)
AC/DC
Max. input current AC 50 Hz
A 2.2
Max. input current AC 60 Hz
A 2.2
Max. input current DC
A 1.35
Type of output voltage
DC
Output voltage at AC 50 Hz
V 0 - 0
Output voltage at AC 60 Hz
V 0 - 0
Output voltage at DC
V 0 - 0
Max. output current AC 50 Hz
A 0
Max. output current AC 60 Hz
A 0
Max. output current DC
A 5
Redundancy
Yes
Suited for safety functions
Yes
Width
mm 130
Height
mm 130
Depth
mm 57

Datasheet - PDF

Title: Size: Type:
PDF CATALOGUE EATON EN.pdf 51 Mbytes

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.