T3-3-15523/V/SVB 008865 EATON ELECTRIC Main switch, 3 pole, 32 A, rear mounting View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

T3-3-15523/V/SVB 008865 EATON ELECTRIC Main switch, 3 pole, 32 A, rear mounting

T3-3-15523/V/SVB

008865

EATON-MOELLER

Available Ship on today

Main switch, 3 pole, 32 A, rear mounting

More details


* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article is obsolete. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Delivery program
Product range
Main switch
maintenance switch
Repair switch
Part group reference
P1
Notes
Handle SVB(-SW)-P1/M (172840; 172842) only for use with extension shaft P1/P3-400 (172844).
Information about equipment supplied
Auxiliary contact or neutral conductor fitted by user.
Number of poles
3 pole
Auxiliary contacts
N/O 0
N/C 0
Degree of Protection
Front IP65
Design
rear mounting
Contact sequence
Front plate no.
Motor rating AC-23A, 50 - 60 Hz
400 V
P kW 15
Rated uninterrupted current
Iu A 32
Technical data
General
Standards
IEC/EN 60947, VDE 0660, IEC/EN 60204
Switch-disconnector according to IEC/EN 60947-3
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
Open
°C -25 - +50
Enclosed
°C -25 - +40
Overvoltage category/pollution degree
III/3
Rated impulse withstand voltage
Uimp V AC 6000
Mechanical shock resistance
g 15
Mounting position
As required
Contacts
Mechanical variables
Number of poles
3 pole
Auxiliary contacts
N/O 0
N/C 0
Electrical characteristics
Rated operational voltage
Ue V AC 690
Rated uninterrupted current
Iu A 32
Note on rated uninterrupted current !u
Rated uninterrupted current Iuis specified for max. cross-section.
Load rating with intermittent operation, class 12
AB 25 % DF
x Ie 2
AB 40 % DF
x Ie 1.6
AB 60 % DF
x Ie 1.3
Short-circuit rating
Fuse
A gG/gL 50
Rated short-time withstand current (1 s current)
Icw Arms 640
Note on rated short-time withstand current lcw
Current for a time of 1 second
Rated conditional short-circuit current
Iq kA 80
Switching capacity
cos ϕ rated making capacity as per IEC 60947-3
A 320
Rated breaking capacity cos ϕ to IEC 60947-3
A
230 V
A 260
400/415 V
A 300
500 V
A 290
690 V
A 250
Safe isolation to EN 61140
between the contacts
V AC 440
Current heat loss per contact at Ie
W 1.8
Lifespan, mechanical
Operations x 106 > 0.3
Maximum operating frequency
Operations/h 1200
AC
AC-3
Rating, motor load switch
P kW
220 V 230 V
P kW 7.5
400 V 415 V
P kW 13
500 V
P kW 18.5
690 V
P kW 15
Rated operational current motor load switch
230 V
Ie A 26.4
400V 415 V
Ie A 26.4
500 V
Ie A 23.4
690 V
Ie A 14.7
AC-21A
Rated operational current switch
440 V
Ie A 32
AC-23A
Motor rating AC-23A, 50 - 60 Hz
P kW
230 V
P kW 7.5
400 V 415 V
P kW 15
500 V
P kW 18.5
690 V
P kW 15
Rated operational current motor load switch
230 V
Ie A 32
400 V 415 V
Ie A 32
500 V
Ie A 30
690 V
Ie A 19.8
DC
DC-1, Load-break switches L/R = 1 ms
Rated operational current
Ie A 32
Voltage per contact pair in series
V 60
DC-23A, motor load switchL/R = 15 ms
24 V
Rated operational current
Ie A 25
Contacts
Quantity 1
48 V
Rated operational current
Ie A 25
Contacts
Quantity 2
60 V
Rated operational current
Ie A 25
Contacts
Quantity 2
120 V
Rated operational current
Ie A 12
Contacts
Quantity 3
Control circuit reliability at 24 V DC, 10 mA
Fault probability HF < 10-5, < 1 fault in 100000 operations
Terminal capacities
Solid or stranded
mm2 1 x (1,5 - 6)
2 x (1,5 - 6)
Flexible with ferrules to DIN 46228
mm2 1 x (1 - 4)
2 x (1 - 4)
Terminal screw
M4
Tightening torque for terminal screw
Nm 1.6
Technical safety parameters:
Notes
B10dvalues as per EN ISO 13849-1, table C1
Rating data for approved types
Contacts
Rated operational voltage
Ue V AC 600
Rated uninterrupted current max.
Main conducting paths
General use
A 30
Auxiliary contacts
General Use
IU A 10
Pilot Duty
A 600
P 600
Switching capacity
Maximum motor rating
Single-phase
120 V AC
HP 1
200 V AC
HP 2
240 V AC
HP 3
Three-phase
200 V AC
HP 3
240 V AC
HP 7.5
480 V AC
HP 10
600 V AC
HP 15
Short Circuit Current Rating
SCCR
Basic Rating
kA 5
max. Fuse
A 110
High fault rating
kA 10
max. Fuse
A 50, Class J
Terminal capacity
Solid or flexible conductor with ferrule
AWG 14 - 8
Terminal screw
M4
Tightening torque
lb-in 14.1
Approvals
Product Standards UL 60947-4-1;CSA - C22.2 No. 60947-4-1-14; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking
UL File No. E36332
UL Category Control No. NLRV
CSA File No. 12528
CSA Class No. 3211-05
North America Certification UL listed, CSA certified
Suitable for Branch circuits, suitable as motor disconnect
Degree of Protection IEC: IP65; UL/CSA Type 1
Technical data ETIM 7.0(Show features)(Hide features)
Low-voltage industrial components (EG000017) / Switch disconnector (EC000216)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Switch disconnector ([email protected] [AKF060013])
Version as main switch
Yes
Version as maintenance-/service switch
Yes
Version as safety switch
No
Version as emergency stop installation
No
Version as reversing switch
No
Number of switches
Max. rated operation voltage Ue AC
V 690
Rated operating voltage
V 690 - 690
Rated permanent current Iu
A 32
Rated permanent current at AC-23, 400 V
A
Rated permanent current at AC-21, 400 V
A 32
Rated operation power at AC-3, 400 V
kW 13
Rated short-time withstand current lcw
kA 0.64
Rated operation power at AC-23, 400 V
kW 15
Switching power at 400 V
kW 15
Conditioned rated short-circuit current Iq
kA 80
Number of poles
3
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
0
Motor drive optional
No
Motor drive integrated
No
Voltage release optional
No
Device construction
Built-in device fixed built-in technique
Suitable for ground mounting
Yes
Suitable for front mounting 4-hole
No
Suitable for front mounting centre
No
Suitable for distribution board installation
No
Suitable for intermediate mounting
Yes
Colour control element
Other
Type of control element
Other
Interlockable
No
Type of electrical connection of main circuit
Screw connection
Degree of protection (IP), front side
IP65
Degree of protection (NEMA)

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.