> EATON - MOELLER>BPM-O-830/12-IVS 111370 ELECTRIC 111370 BPM-O-830/12-IVS
Previous Product Next Product
BPM-O-830/12-IVS 111370 EATON ELECTRIC 111370 BPM-O-830/12-IVS View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

BPM-O-830/12-IVS 111370 EATON ELECTRIC 111370 BPM-O-830/12-IVS

BPM-O-830/12-IVS

111370

EATON-MOELLER

111370 BPM-O-830/12-IVS

More details


Home > EATON - MOELLER

* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info

▲


Installation distribution board, HxWxD=1260x830x262mm, IP54
Service distribution boards IVS are used for power distribution and measurement purposes in electrical systems for household electrical systems and in comparative systems such as residential buildings, schools, administration centers, offices and similar buildings.
[

Delivery program

Product range
Service distribution board IVS
Basic function
Wall-mounting distribution system
Single unit/Complete unit
Complete housing
Degree of Protection
IP55
Description
Profi Plus basic enclosures
Monoblock enclosure with door and double ward key lock
The enclosure can be turned through 180° for cable entry from below.
Material
Sheet steel
Surface finish
Polyester powder coating
Phosphated
RAL 7035, light grey
Colour
light gray (RAL 7035)
Information about equipment supplied
Including mounting system for the IVS mounting units
including insulating surround and mounted insulated support bracket
including open cable entry at top, prepared for F3A flanges, closed at bottom
Width
830 mm
Height
1260 mm
Depth
270 mm
,

Technical data

General
Standards
EN 60439-1/3
IEC 62208
Protection class
1
Degree of Protection
IP55
Power lossMax. admissible heat dissipation, ambient air temperature +35 °C
244 W
Weight
49.5 kg
Material characteristics
Material
Sheet steel
Surface treatment
Painting, phosphated and polyester powder coating
Surface finish
Polyester powder coating
Phosphated
RAL 7035, light grey
Colour
light gray (RAL 7035)
Material characteristicsType Door
Doors with covered hinges
Can be removed from 90°
Material characteristicsdoor opening angle
100° (single mounting)
Material characteristicsDoor interlock
Hinge handle with roller lever lock
Cylinder lock
Double-ward lock
Material properties
MechanicalImpact resistance
IK07
MechanicalCable entry
Open cable entry, prepared for F3A flanges
ElectricalRated operational voltage [Ue]
690 V
ElectricalRated frequency [f]
50 Hz
ElectricalRated operational current [Ie]
630 A
ElectricalMax. admissible heat dissipation, ambient air temperature +35 °C
244 W
ElectricalEarthings
M6 weld stud (base frame)
M5 self-tapping screw (enclosure side plate, top/bottom panel)
M6 weld stud (door)
,

Design verification as per IEC/EN 61439

Technical data for design verification
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure for wall mounting [PV]
125 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure for wall mounting [PV]
122 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure for wall mounting [PV]
108 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure for wall mounting [PV]
251 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure for wall mounting [PV]
245 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure for wall mounting [PV]
216 W
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Not relevant to indoor installations.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply to enclosures without lifting aids.
10.2 Strength of materials and parts10.2.6 Mechanical impact
IK10
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
IP55
10.4 Clearances and creepage distances
Is the panel builder's responsibility.
10.5 Protection against electric shock
< 0.1 Ω; meets the product standard's requirements.
10.6 Incorporation of switching devices and components
Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Ui = 440 V AC
10.9 Insulation properties10.9.3 Impulse withstand voltage
4 kV
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Does not apply to metal enclosures.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
Meets the product standard's requirements.
]

Datasheet - PDF

▲
Title: Size: Type:
PDF CATALOGUE EATON EN.pdf 51 Mbytes
BPM-O-830/12-IVS 111370 111370.pdf 167 Kbytes BPM-O-830/12-IVS 111370 111370.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.