Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
RASP-412AI1S0-C32RS1 150214 EATON ELECTRIC Speed controller, 400 V AC, 3-phase, 4.3 A, manual override switc..
RASP-412AI1S0-C32RS1
150214
EATON-MOELLER
Speed controller, 400 V AC, 3-phase, 4.3 A, manual override switch, Control voltage external brake (50/60 Hz): 230/277 V AC, braking resistance
Rapid Link 4.0; Frequency converter; Up to 4.3 A; With manual control switch; External brake voltage 230 V AC; With braking resistance
Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 modules, with manual override switch, with braking resistance
Devices for distribution board-/surface mounting > Speed controller
Rapid Link Starters
Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
Best sellers
▲More info
▲Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 modules, with manual override switch, with braking resistance
Speed controller, Description: integrated PTC thermistor monitoring and Thermoclick with safe isolation, Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation, optional: 4 sensor inputs with M12-Y adapter for switchover to creep speed, Connection of supply voltage via adapter cable on round or flexible busbar junction, Diagnostics and reset on device and via AS-Interface, with AUTO - OFF/RESET - HAND key switches, 3 fixed speeds and 1 potentiometer speed, can be switched over from U/f to (vector) speed control, with selector switch REV - OFF - FWD, optional: Faster stop if external 24 V fails, with manual override switch, Fan: without fan, Braking resistance: with braking resistance, Rated operational voltage: Ue= 400 V AC, 3-phase, 480 V AC, 3-phase, Output voltage with Ve: U2= 400 V AC, 3-phase, Mains voltage (50/60Hz): ULN= 380 (-15%) - 480 (+10%) V, At 150% overload: Ie= 4.3 A, Control voltage external brake (50/60 Hz): 230/277 V AC, Mains voltage (50/60Hz): ULN= 380 (-15%) - 480 (+10%) V, assigned motor rating P Note: at 400 V, 50 Hz, 150 % Overload: P= 1.5 kW, assigned motor rating P Note: at 480 V, 60 Hz, 150 % Overload: P= 2 HP, assigned motor rating P Note: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, AS-Interface profile cable: S-7.4 for 31 modules, Standards: IEC/EN 61800-5-1, UL 61800-5-1, Guideline 2011/65/EU (RoHS), CE approval, UL approval, Degree of Protection: IP65, NEMA12
Delivery program
This item is only available until 06/30/2020, after which it will be replaced with the following item: Y7-198564, RASP5-4202A31-512R100S1
Product range
Speed controller
Rated operational voltage [Ue]
400 V AC, 3-phase
480 V AC, 3-phase
480 V AC, 3-phase
Output voltage with Ve[U2]
0 - ULN
Mains voltage (50/60Hz) [ULN]
380 (-15%) - 480 (+10%) V
At 150% overload [Ie]
4.3 A
assigned motor rating P
Note
at 400 V, 50 Hz
150 % Overload [P]
1.5 kW
Note
at 480 V, 60 Hz
150 % Overload [P]
2 HP
Note
for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1at 50 Hz or 1800 min-1at 60 Hz
Description
integrated PTC thermistor monitoring and Thermoclick with safe isolation
Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation
optional: 4 sensor inputs with M12-Y adapter for switchover to creep speed
Connection of supply voltage via adapter cable on round or flexible busbar junction
Diagnostics and reset on device and via AS-Interface
with AUTO - OFF/RESET - HAND key switches
3 fixed speeds and 1 potentiometer speed
can be switched over from U/f to (vector) speed control
with selector switch REV - OFF - FWD
optional: Faster stop if external 24 V fails
Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation
optional: 4 sensor inputs with M12-Y adapter for switchover to creep speed
Connection of supply voltage via adapter cable on round or flexible busbar junction
Diagnostics and reset on device and via AS-Interface
with AUTO - OFF/RESET - HAND key switches
3 fixed speeds and 1 potentiometer speed
can be switched over from U/f to (vector) speed control
with selector switch REV - OFF - FWD
optional: Faster stop if external 24 V fails
Control voltage external brake (50/60 Hz)
230/277 V AC V
Interface/field bus (built-in)
AS-Interface®
AS-Interface profile cable
S-7.4 for 31 modules
Repair switch
with manual override switch
Braking resistance
with braking resistance
Instructions
for actuation of motors with mechanical brake
integrated brake chopper with braking resistance for dynamic braking
integrated brake chopper with braking resistance for dynamic braking
Technical data
General
Standards
IEC/EN 61800-5-1
UL 61800-5-1
Guideline 2011/65/EU (RoHS)
CE approval
UL approval
UL 61800-5-1
Guideline 2011/65/EU (RoHS)
CE approval
UL approval
Climatic proofing [ρw]
< 95%, non-condensing
IEC/EN 50178 %
IEC/EN 50178 %
Ambient temperatureOperating ambient temperature min.
0 °C
Ambient temperatureOperating ambient temperature max.
+40 °C
Ambient temperature
0 - +55 (with fan RASP-FAN-1)
Ambient temperatureStorage [ϑ]
-30 - +70 °C
Overvoltage category
III
Rated impulse withstand voltage [Uimp]
2 kV
Radio interference levelEnvironment (EMC)
2. Environment, Class C3
Radio interference levelmaximum motor cable length [I]
10 m
Mechanical shock resistance
1000 shocks per shaft, semi-sinusoidal 15 g/11 ms
IEC/EN 60068-2-27 g
IEC/EN 60068-2-27 g
Vibration
Oscillation frequency: 10 - 150 Hz
Amplitude 0.15 mm: 6 Hz
Amplitude transition frequency on acceleration: 57 Hz
IEC/EN 60068-2-6
Amplitude 0.15 mm: 6 Hz
Amplitude transition frequency on acceleration: 57 Hz
IEC/EN 60068-2-6
Mounting position
Vertical
Altitude
0 - 1000 m above sea level
above 1000 m with 1 % performance reduction per 100 m
max. 2000 m m
above 1000 m with 1 % performance reduction per 100 m
max. 2000 m m
Degree of Protection
IP65
NEMA12
NEMA12
Main circuit
SupplyRated operational voltage [Ue]
400 V AC, 3-phase
480 V AC, 3-phase
480 V AC, 3-phase
SupplyMains voltage (50/60Hz) [ULN]
380 (-15%) - 480 (+10%) V
SupplyInput current (150% overload) [ILN]
5.6 A
SupplySystem configuration
AC voltage
Center-point earthed star network (TN-S network)
Phase-earthed AC supply systems are not permitted.
Center-point earthed star network (TN-S network)
Phase-earthed AC supply systems are not permitted.
SupplySupply frequency [fLN]
50/60 Hz
SupplyFrequency range [fLN]
47 - 66 Hz (± 0%) Hz
SupplyMains switch-on frequency
Maximum of one time every 60 seconds
SupplyMains current distortion [THD]
> 120 %
SupplyRated conditional short-circuit current [Iq]
< 5 kA
SupplyShort-circuit protection for output circuits, external
Type 1 coordination via the power bus' feeder unit
Power sectionFunction
Variable frequency drive with internal DC link and IGBT inverter
Power sectionOn-delay [tON]
30 - 50 ms
Power sectionOff-delay [tOFF]
15 - 35 ms
Power sectionOverload current (150% overload) [IL]
6.5 A
Power sectionNote regarding overload current
at 40 °C
Power sectionNote about max. starting current
for 2 seconds
at 40 °C
at 40 °C
Power sectionOutput voltage with Ve[U2]
0 - ULN
Power sectionOutput Frequency [f2]
0 - 50/60 (max. 320) Hz
Power sectionSwitching frequency [fPWM]
6
adjustable 1.5 - 16 kHz
adjustable 1.5 - 16 kHz
Power sectionOperation Mode
linear, parameterizable
Power sectionFrequency resolution (setpoint value) [Δf]
0.01 Hz
Power sectionRated operational currentAt 150% overload [Ie]
4.3 A
Power sectionNote
Rated operational current at an operating frequency of 6 kHz and an ambient air temperature of +40 °C
Power sectionMotor current limit [I]
0.86 - 8.6
adjustable A
adjustable A
Power sectionEfficiency [η]
0.96 %
Power sectionMaximum leakage current to ground (PE) without motor [IPE]
3.5 mA
Power sectionFan
internal, temperature controlled
optional RASP-FAN-S1 on heat sink, temperature-controlled
optional RASP-FAN-S1 on heat sink, temperature-controlled
Power sectionFitted with
with manual override switch
without fan
with braking resistance
without fan
with braking resistance
Motor feederNote
for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1at 50 Hz or 1800 min-1at 60 Hz
Motor feederNote
at 400 V, 50 Hz
Motor feeder150 % Overload [P]
1.5 kW
Motor feederNote
at 480 V, 60 Hz
Motor feeder150 % Overload [P]
2 HP
Motor feederActuator for external motor brakeBreaking voltage [U]
230/277 V AC -15% / +10% V
Motor feederActuator for external motor brakeBraking current [I]
≤ 0.6 A
(max. 6 A for 120 ms) A
(max. 6 A for 120 ms) A
Motor feederBraking functionBraking torque [%]
≦ 30 I/Ie
Motor feederBraking functionSwitch-on threshold for the braking transistor [UDC]
765 V DC V
Motor feederBraking functionDC braking [%]
≦ 100, adjustable I/Ie
Control section
External control voltage [Uc]
24 V DC - 15 % / + 20 % via AS-Interface®plug V
Interface/field bus (built-in)
AS-Interface®
AS-Interface®
max. total power consumption from AS-Interface® power supply unit (30 V): 250 mA
Specification: S-7.4
Number of slave addresses: 31
Specification: S-7.4
Number of slave addresses: 31
Design verification as per IEC/EN 61439
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+40 °C
Technical data ETIM 7.0
Devices for distribution board-/surface mounting (EG000062) / Speed controller (EC000256)
Electric engineering, automation, process control engineering / Electrical installation, device / Modular serial built-in device for electrical circuit distributors / Speed controller ([email protected] [ACN359011])
Mounting method
Surface mounted (plaster)
Colour
Grey
RAL-number
0
Nominal current
4.3 A
Output voltage
0 - 400 V
Number of phases
3
Power control step less
Yes
Number of steps
0
Basic element without cover
Yes
Method of operation
Key
Illumination
None
Switching contact
No
With temperature sensor
Yes
Height
270 mm
Width
220 mm
Depth
195 mm
Degree of protection (IP)
IP65
Dimensions
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF EATON STARTING CONTROLLING MOTORS EN.pdf | 37 Mbytes |
|
| PDF CATALOGUE EATON EN .pdf | 38 Mbytes |
|
| RASP-412AI1S0-C32RS1 RASP-412AI1S0-C32RS1 150214 EN_150214.pdf | 251 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.