+EZ/S-B 045459 EATON ELECTRIC Front element, for TM switch, EZ-, key operation lock mechanism, kaba no.B View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

+EZ/S-B 045459 EATON ELECTRIC Front element, for TM switch, EZ-, key operation lock mechanism, kaba no.B

+EZ/S-B

045459

EATON-MOELLER

Front element, for TM switch, EZ-, key operation lock mechanism, kaba no.B

More details


Low-voltage industrial components > Front element for selector switch

Disconnectors and Cam Switches

* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Front element, for TM switch, EZ-, key operation lock mechanism, kaba no.B
Front element for TM switch, Basic function: Locking arrangements, Function: Key operation lock mechanism, KABA lock 90 Grad, When ordering with basic unit, For use with: Centre mounting (EZ), Information about equipment supplied: with two keys, Degree of Protection: IP65

Delivery program

Basic function
Locking arrangements
Function
Key operation lock mechanism
KABA lock 90 Grad
When ordering with basic unit
For use with
Centre mounting (EZ)
Information about equipment supplied
with two keys
Key withdrawable with
1150SPC-181
Degree of Protection
IP65
Notes
The KABA lock for 90° can be used for other switching angles as well (for example) if the key withdrawability characteristics match the switch.
Example: +EZ/S-B can be used with a step switch with a switching angle of 30° if the key should only be withdrawable in the 0 position at 270°.

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+50 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
Not applicable.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Front element for selector switch (EC000222)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Front element for selector switches ([email protected] [AKF031014])
Number of switch positions
0
Type of control element
Key
Suitable for illumination
No
Colour control element
Silver
Colour indicator light cap
Other
Construction type lens
Square
Hole diameter
0 mm
Width opening
0 mm
Height opening
0 mm
Switching function latching
No
Spring-return
No
With front ring
Yes
Material front ring
Plastic
Colour front ring
Other
Degree of protection (IP), front side
IP65
Degree of protection (NEMA)
Other

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.