> EATON - MOELLER>Remote I / O Modules XION>XN-2DO-24VDC-0.5A-N 140060 0004520654 ELECTRIC Digital output module XI/ON, 24 V DC, 2DO, 0.5A, negati..
Previous Product Next Product
XN-2DO-24VDC-0.5A-N 140060 0004520654 EATON ELECTRIC Digital output module XI/ON, 24 V DC, 2DO, 0.5A, negati.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

XN-2DO-24VDC-0.5A-N 140060 0004520654 EATON ELECTRIC Digital output module XI/ON, 24 V DC, 2DO, 0.5A, negati..

XN-2DO-24VDC-0.5A-N

140060

0004520654

EATON-MOELLER

Digital output module XI/ON, 24 V DC, 2DO, 0.5A, negative switching

XION 2 Module Digital Outputs 0.5A NPN

More details


PLC's > Fieldbus, decentr. periphery - digital I/O module

Remote I / O Modules XION

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

▲

Best sellers

▲

More info

▲


EL-Nummer (Norway)
0004520654
Digital output module XI/ON, 24 V DC, 2DO, 0.5A, negative switching
The XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules' mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.

Delivery program

Function
XI/ON I/O modules
Function
XN Slice module
Short Description
2 Digital output, 24 V DC/0.5 A
Negative switching
For use with
XN-S3T-SBC
XN-S3S-SBC
XN-S4T-SBCS
XN-S4S-SBCS

Technical data

General
Standards
EN 61000-6-2
EN 61000-6-4
EN 61131-2
Potential isolation
Yes, through optocoupler
Ambient temperatureAmbient temperature, operation
0 - +55 °C
Ambient temperatureStorage, transport [ϑ]
-25 - +85 °C
Relative humidityRelative humidity
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanicalDegree of Protection
IP20
Ambient conditions, mechanicalHarmful gases
SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Vibration resistance, operating conditions
according to IEC/EN 60068-2-6
Mechanical shock resistance
according to IEC 60068-2-27 g
Continuous shock resistance (IEC/EN 60068-2-29)
According to IEC 60068-2-29
Drop and topple
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC)ESD [Air/contact discharge]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)Burst
EN 61100-4-4
Electromagnetic compatibility (EMC)Surge
EN 61100-4-5
Electromagnetic compatibility (EMC)Radiated RFI
EN 61100-4-6 V
Electromagnetic compatibility (EMC)Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)Voltage fluctuations/voltage dips
EN 61131-2
Electromagnetic compatibility (EMC)Type test
to EN 61131-2
Approvals
CE, cULus
Other technical data (sheet catalogue)
Analog input modules
Channels
2 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
20 mA
Rated current consumption from module bus [IMB]
≦ 32 mA
Connectable sensors
Resistive loads
Inductive loads
Lamp loads
Diagnostics
2
Diagnostics
Yes
Analog output modules
Channels
2 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
20 mA
Rated current consumption from module bus [IMB]
≦ 32 mA
Load resistanceResistive load
≧ 48 Ω
Load resistanceInductive load
1.2 h
Digital outputs
Channels
2 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from the supply terminal (at load current = 0 mA) [IL]
20 mA
Rated current consumption from module bus [IMB]
≦ 32 mA
Power loss [P]
Normally 1 W
Output voltageHigh level [UH⁄UA]
< GNDL+ 1 V DC
Output currentHigh level (rated value) [IH]
0.5 A
Output currentHigh level (permissible range) [IH]
< 0.6 A
Module total current
1 A
Delay on signal change and resistive loadfrom Low to High level
100 µs
Delay on signal change and resistive loadFrom High to Low signal
100 µs
Utilization factor [%]
100 g
Can be connected
Resistive loads
Inductive loads
Lamp loads
Resistive load
≧ 48 Ω
Inductive load
1.2 h
Lamp load [RLL]
≦ 12 W
Switching frequencyWith resistive load [f]
100 (RLO< 1 kohm) Hz
Switching frequencywith inductive load
< 2
Switching frequencySwitching frequency with lamp load [f]
10 Hz
Number of diagnostic bytes
2
Diagnostics
Yes
Outputs to EN 61131-2
Protected
Reset after short-circuit rectified [Ii]
Automatic
Base moduleswith C connection
2-wire/3-wire
XN-S3x-SBC
4-wire
XN-S4x-SBCS
Digital inputs
Channels
2 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
20 mA
Rated current consumption from module bus [IMB]
≦ 32 mA
Input voltageHigh level [UeH]
Max. GND (+1 V) V
Base moduleswith C connection
2-wire/3-wire
XN-S3x-SBC
4-wire
XN-S4x-SBCS
Relay modules
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
20 mA
Rated current consumption from module bus [IMB]
≦ 32 mA
Power loss [P]
Normally 1 W
Can be connected
Resistive loads
Inductive loads
Lamp loads
Utilization factor [g]
100 %
Base moduleswith C connection
2-wire/3-wire
XN-S3x-SBC
4-wire
XN-S4x-SBCS
Power supply module
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
20 mA
Rated current consumption from module bus [IMB]
≦ 32 mA
Diagnostics
2
Power loss [P]
1 W
Counter module
Channels
2 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
20 mA
Rated current consumption from module bus [IMB]
≦ 32 mA
Digital inputs
Input voltageHigh level [UeH]
Max. GND (+1 V) V
Digital outputs
Output currentHigh level (permissible range) [IH]
< 0.6 A
Output currentHigh level (rated value) [IH]
0.5 A
Switching frequencywith resistive load
100 Hz
Switching frequencyInductive load
2 Hz
Switching frequencySwitching frequency with lamp load [f]
10 Hz
Lamp load [RLL]
≦ 12 W
Short-circuit rating
Protected
Measuring modes
Diagnostics
2
Interfaces
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
20 mA
Rated current consumption from module bus [IMB]
≦ 32 mA
Power loss [P]
Normally 1 W
Number of diagnostic bytes
2
Notes

The supply terminal (UL) provides power for the module electronics and for the consumers at the outputs. The total current required for each module consists of the sum of all partial currents.

Part of the XI/ON module’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL).

To increase the maximum output current to up to 1 A, two outputs can be connected in parallel.

Note for table header

The rated current from supply terminal data apply at zero load current.

Applies for resistive load: RLO < 1kΩ

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
1 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+55 °C
Degree of Protection
IP20
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

PLC's (EG000024) / Fieldbus, decentr. periphery - digital I/O module (EC001599)
Electric engineering, automation, process control engineering / Control / Field bus, decentralized peripheral / Field bus, decentralized peripheral - digital I/O module ([email protected] [BAA055014])
Supply voltage AC 50 Hz
0 - 0 V
Supply voltage AC 60 Hz
0 - 0 V
Supply voltage DC
18 - 30 V
Voltage type of supply voltage
DC
Number of digital inputs
0
Number of digital outputs
2
Digital inputs configurable
No
Digital outputs configurable
No
Input current at signal 1
0 mA
Permitted voltage at input
0 - 0 V
Type of voltage (input voltage)
DC
Type of digital output
Other
Output current
0.5 A
Permitted voltage at output
0 - 30 V
Type of output voltage
DC
Short-circuit protection, outputs available
No
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces parallel
0
Number of HW-interfaces Wireless
0
Number of HW-interfaces USB
0
Number of HW-interfaces other
1
With optical interface
No
Supporting protocol for TCP/IP
No
Supporting protocol for PROFIBUS
Yes
Supporting protocol for CAN
Yes
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for MODBUS
No
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
Yes
Supporting protocol for SUCONET
No
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
Yes
Radio standard Bluetooth
No
Radio standard WLAN 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Radio standard UMTS
No
IO link master
No
System accessory
Yes
Degree of protection (IP)
IP20
Type of electric connection
Plug-in connection
Time delay at signal exchange
0 - 0.1 ms
Fieldbus connection over separate bus coupler possible
Yes
Rail mounting possible
Yes
Wall mounting/direct mounting
No
Front build in possible
No
Rack-assembly possible
No
Suitable for safety functions
No
Category according to EN 954-1
None
SIL according to IEC 61508
None
Performance level acc. EN ISO 13849-1
None
Appendant operation agent (Ex ia)
No
Appendant operation agent (Ex ib)
No
Explosion safety category for gas
None
Explosion safety category for dust
None
Width
12.6 mm
Height
74.1 mm
Depth
55.4 mm

Approvals

Product Standards
UL 508; CSA-C22.2 No. 142; IEC/EN 6113-2; CE marking
UL File No.
E205091
UL Category Control No.
NRAQ, NRAQ7
CSA File No.
UL report applies to both US and Canada
CSA Class No.
2252-01, 2252-81
North America Certification
UL recognized, certified by UL for use in Canada
Specially designed for North America
No
Current Limiting Circuit-Breaker
No
Degree of Protection
IEC: IP20, UL/CSA Type: -

Dimensions

2725DIM-3
Link to sheet catalogue

Datasheet - PDF

▲
Title: Size: Type:
PDF CATALOGUE EATON EN .pdf 38 Mbytes
XN-2DO-24VDC-0.5A-N 0004520654 140060 EN_140060.pdf 196 Kbytes XN-2DO-24VDC-0.5A-N 0004520654 140060 EN_140060.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account