Product name
Eaton Moeller series NZM connection type
Product Length/Depth
140 millimetre
Product height
50 millimetre
Product width
90 millimetre
Product weight
3.215 kilogram
Compliances
IEC
UL/CSA
RoHS conform
Certifications
CSA certified
CE marking
CSA-C22.2 No. 5-09
CSA (File No. 22086)
UL (Category Control Number DIHS)
UL (File No. E31593)
IEC60947
UL489
CSA (Class No. 1432-01)
UL listed
Product Sub Type
Connection type
Type
Accessory
Connection width extension
Terminal
Number of poles
Three-pole
Special features
Five-hole fitting
Suitable for
Copper cable lugs
Three-pole
Technical Data - Mechanical
Special features
Five-hole fitting
Technical Data - Mechanical - Terminals
Terminal capacity (flexible cable)
Max. 500 AWG/kcmil (6x)
95 mm² - 240 mm² (6x)
300 mm² (4x)
600 AWG/kcmil (4x)
Terminal capacity (copper busbar)
Max. 80 mm x 10 mm (2x)
Terminal capacity (copper strip)
Min. 10 segments of 50 mm x 1 mm
Design verification as per IEC/EN 61439
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.