IR Remote Controller BSJ-REMSTD64 Handheld infrared remote controller 8 channel transmitter (possible to increase the number of channels to 64) Designed and coded for BSJ-IRX8 and BOW-IRXSTD8 IR receiver Operating distance: 15 m Supplied via 2 x 1.5 V micro batteries (AA) GENERAL SPECIFICATIONS Principle of transmissionInfrared light 950 nm Wave frequency 38 kHz Coding PPM-kode (Pulse Position Modulation) Length of telegram 12 bit No. of channels 8 (64 via more IR-receivers BSJ-IRX8 and BOW-IRXSTD8) Operating distance 15 m SUPPLY SPECIFICATIONS Dimensions Batteries 2 x 1.5 V (LR06) size AA TYPE SELECTION Supply Ordering no. Batteries BSJ-REMSTD64 Indication of currently63 activated group Change switching group MODE OF OPERATION The IR remote control system is a system component for the smart- house bus. It consists of two modules: an 8-channel IR-receiver (smart- house transmitter) and an 8-channel handheld IR transmitter. The IR-receiver is supplied by smart-house, which eliminates the need for further connections, and is intended for building into flush-type switch boxes. The IR-receiver can transmit on eight smart-house chan- nels, and the address coding is performed by means of the program- ming unit BGP-COD-BAT through the rear-mounted modular plug connection. The handheld IR-transmitter has eight keys for activation of the eight channels. By means of push-button A-H, it is possible to preset channel groups A to H of the corresponding receiver, which means that a handheld transmitter can activate up to 64 channels. The 64 channels are NOT smart-house addresses, but an internal coding between transmitter and receiver. See datasheet for IR-receiver BSJ-IRX8 or BOW-IRXSTD8 for further information. The handheld transmitter features a text writing facility at the back. Start-up Address coding of the IR-receiver (smart-house transmitter) can take place before or after start-up. In either case, the bus cable must be con- nected at the screw terminal on the back of the receiver (1=Signal, 2=Ground). The IR-receiver should be mounted in the specified direc- tion in the switch box, in order to achieve optimum receiving charac- teristics. The handheld IR-transmitter must be equipped with two batteries type LR06 size AA. The transmission with IR systems only works when quasi-visual contact exists between transmitter and receiver within the transmission range. Often reflection reception is also possible. Transmission cannot take place through walls or windows. Therefore a suitable place for mounting must be selected. Specifications are subject to change without notice (12.09.2007) - A product of the CARLO GAVAZZI Group
Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.