Dupline®Profibus-DP Gateway Passive with safety mapping Type GS 3891 0125 • Passive gateway without channel generator • PROFIBUS-DPslave according to EN 50 170 • Certified by the PNO • Can be connected at any point in a Dupline®network • Several gateways can be connected to the same Dupline® network • cULus approved • PROFIBUS-DP communicationspeed of up to 12 M Baud • Read/control 128 standard inputs/outputsthrough PROFIBUS-DP • 63 DuplineSafe signals can be read via the PROFIBUS-DP network • For mounting on DIN-rail (EN 50 022) • LED indicators for supply, Dupline®carrier and fault • AC power supply Product DescriptionOrdering Key GS 3891 0125 230 Dupline®Gateway withthe function of a PROFIBUS-DP slave. This means thatthe Dupline®I/O’s (incl. Dupline® Safe signals) canberead/ controlled by PROFIBUS-DP masters(PLC’s,PCinter- gateways can be connected to the same Dupline®net- work.Theunitiscertified by PNO (Profibus Nutzer Organisation) which ensures compatibility and interoper- ability with other PNO-certi- Duplinesafe Type no. Supply Type Selection face cards, etc. from various suppliers). Several Dupline® fied products. Supply Ordering no. 115/230 VAC GS 3891 0125 230 Input/Output Specifications PROFIBUS-DP RS 485 9-pole female SUB-D Pin assignment A Pin 8 B Pin 3 RTS Pin 4 +5V Pin 6 GND Pin 5 Baudrate Auto detection Cable length 100 m @ 12 MBaud 200 m @ 1.5 MBaud 1200 m @ 93.75 kBaud Up-date time (128 digital I/O) Typ. 200 µs at 12 MBaud Typ. 1.6 ms at 1.5 MBaud Dielectric voltage PROFIBUS-DP Dupline®≥ 4 kVAC (rms) PROFIBUS-DP ID-no. 6590 GSD-fileGS38_125.gsd Adjustments 2 x 10 pos. rotary switch PROFIBUS Slave Address Range 02 to 99 1 x 16 pos. rotary switch Not used DIP-switch 1 Not used DIP-switch 2 Not used DIP-switch 3 Not used DIP-switch 4 Off in normal mode Approvals PROFIBUS operabilityPNO (Profibus Nutzer Organisation) General Specifications Power ON delay< 2.5 s Indication for Supply ONLED, green Dupline®carrierLED, yellow Fault LED, red Environment Degree of protection IP 20 Pollution degree 3 (IEC 60664) Operating temperature 0° to +50°C (+32° to +122°F) Storage temperature-20° to +85°C (-4° to +185°F) Humidity (non-condensing) 20 to 80% RH Mechanical resistance Shock15 G (11 ms) Vibration2 G (6 to 55 Hz) Terminals Screwterminals Tightening torque0.8 Nm Dimensions 144 x 77 x 70 mm MaterialH8-housing Weight540 g Approvals IEC/EN 61508-SIL3 EN954 cat 4 TÜV Rheinland Group cULus Conformity CE EMC Industrial Environment Specifications are subject to change without notice (23.10.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.