Selected parameters MODULE TYPE Input module HOUSING Open PCB I/O TYPE Contact input NUMBER OF I/O 8 Others MODULE TYPE Input module I/O TYPE Contact input with pulse prolongation MAIN CHARACTERISTICS Open PCB module with 8 contact inputs
Input-Module forElevators TypeG 2120 5501 700, G 2120 5502 700 Duline® FieldbusInstallationbus • 8-channel transmitter • 8 contact or NPN transistor inputs (G2120 5501) or 8 voltage or PNP transistorinputs (G2120 5502) • Open printed circuit board • Bracket for DIN-rail mounting available • LED-indications for supply and Dupline®carrier • DC or Dupline®supplied • Channel coding by GAP 1605 Product DescriptionOrdering Key G 2120 5501 700 Dupline transmitter design- ed to be a part of the Dupline®concept for push buttons and lamps in eleva- tors.Installerfriendly mounting, operation and maintenance without re- quirement of any special tools or programming. Type: Dupline® Open PCB Input-Module Number of I/Os Input type DC-supply TypeSelection SupplyOrdering no. Ordering no. 8 contact or NPN transistor inputs 8 voltage or PNP transistor input 10-30 VDCG 2120 5501 700G 2120 5502 700 InputSpecifications TypeG2120 5501 Supply Specifications (cont.) Inputs 8 contacts or NPN-transistors Open loop voltage8.0 VDC Short-circuit current 17µA Start peak current 20mA Contact resistance ≤ 100Ω Max voltage drop1V Cable length ≤ 3m Response time≤ 156 ms @ 128 channels Input pulse prolongationTyp. 0.5 s InputSpecifications TypeG2120 5502 Current consumption When Dupline supplied≤ 0.9 mA Transient protection voltage 800 V Insultation voltage: Supply - Dupline®None Supply - OutputsNone General Specifications Power ON delayTyp. 2 s Indication for Supply ONLED, green Inputs 8 voltage or PNP-transistors Input current < 2mA (@ 24V) Start peak current 20 mA Input voltage “ON”> 9V Input voltage “OFF”< 1V Cable length ≤ 3m Response time≤ 156 ms @ 128 channels) Input pulse prolongationTyp. 0.5 s Supply Specifications Power supply DC typesInstallation cat III (IEC 60664) Operational voltage (VDD In ) 10-30 VDC (ripple included) Ripple ≤ 3 V Reverse polarity protection Yes Power dissipation ≤ 0.5 W Current consumption≤ 20 mA Dupline® carrier LED, yellow (No indication when Dupline® supplied) Environment Operating temperature -20 to +50°C (-4 to +122°F) Storage temperature-50 to +85°C (-58 to +185°F) Humidity (non-condensing) 20 - 80% Mechanical resistance Shock15 G (11 ms) Vibration 2 G (6 to 55 Hz) Dimensions Open PCB 72,3 x 59 mm 4 pcs. of nylon PA6 snap locks are included for mounting the PCB in ø 4.8 holes Weight50 g Specifications are subject to change without notice (01.02.2007)1 Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.