G88106265 CARLO GAVAZZI Selected parameters MODULE TYPE Input module HOUSING Decentral POWER SUPPLY DC I/O .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

G88106265 CARLO GAVAZZI Selected parameters MODULE TYPE Input module HOUSING Decentral POWER SUPPLY DC I/O ..




Ship on today

Selected parameters MODULE TYPE Input module HOUSING Decentral POWER SUPPLY DC I/O TYPE Analog DIN signal NUMBER OF I/O 3 Others MODULE TYPE Input module HOUSING 53x30x21 I/O TYPE 0-10 VDC POWER SUPPLY 15-30 VDC MAIN CHARACTERISTICS Decentral analog input module

More details



Field Installation Bus and Safety Bus, Car Park “Guidance” System, Elevator Controls and Irrigation Systems

* Brand new product in its original packaging covered by the warranties and certifications provided by CARLO GAVAZZI

Quantity Price
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

Decentralized Analog Input Module
TypeG 8810 6265
• 3 x 0-10 VDC analog inputs
• Analink protocol (8-bit resolution)
• Uses one Dupline®address per used input
• DC-powered (15-30 VDC)
• Small dimension housing for decentralized installation inside wall-box or environmental sensor housings
• Address programming via GAP1605
Product DescriptionOrdering Key
G 8810 6265
Dupline®Analink transmitter with 3 analog inputs. The compactsize of the module makes it possible to fit it into a wall-box or an environmental sensor housing, thereby enabling a decentralized installation concept where the Dupline®bus and DC power are multi-droppedfrom sen-
sor to sensor. This simplifies the wiring to the controller compared to traditional star wiring connections, reduces thenumberofDDC’sand sub-panels required and pro- vides a higher flexibility for last-minute changes and enhancements. The module has 3 x 0-10 VDC inputs.
Type: Dupline® Housing Transmitter Number of Inputs Input type
SupplyOrdering no.
By Dupline® G8810 6265
Supply and Bus Specifications
Power Supply
Operational voltage range15 - 30 VDC Max ripple 1 V
Reverse polarity protectionYes
Overvoltage category Overvoltage cat. ll (IEC
60664-1, par. Rated impulse voltage 500 V (1,2/50µs) (IEC
60664-1, tab. F.1) Typ. current consumption 15 mA (only internal) Max. output current100 mA (not self-limited) Power on delay£ 2 s
Power off delay£ 1 s
Dupline® Bus
Min. Dupline® voltage 4.5 V Typ. Dupline® bus load 1.5 mA
Input 1 (V1) Channel I/O2
Input 2 (V2) Channel I/O1
Input 3 (V3) Channel I/O3
Specifications for Analog inputs
Input 1,2 and 3
Input type 3 x 0-10 VDC
Inaccuracy< 0.5% fs (over entire temp range) (±1 Analink bit)
Max input level 50 V Input impedance>100 kΩ Cable length < 5 m Resolution
Analink count = 0 The module is not connected
Analink count = 1 Voltage input < 0.04 mV ((Count/255) x 10 V)
Analink count = 2 Voltage input < 0.08 mV ((Count/255) x 10 V)
Analink count = 254 Voltage input < 9.96 V ((Count/255) x 10 V)
Analink count = 255 Voltage input ³ 10.00 V
Analink Protocol
Response time256 Dupline® cycles
(36s @ 128 channels)
Specifications are subject to change without notice (08.12.2011) 1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.