Selected parameters MODULE TYPE Carpark sensor with bus-controlled 3-colour LED indicators HOUSING Ceiling-mount POWER SUPPLY Bus-powered DISPLAY PROPERTIES Red Green Blue LEDs Others MODULE TYPE Carpark sensor with bus-controlled 3-colour LED indicators HOUSING M118x76 POWER SUPPLY Bus-powered DISPLAY PROPERTIES Red Green Blue LEDs
Dupline® Car Park System Type GP6220 330x 3-Colour Ultrasonic Sensor • Ultrasonic sensor with a 3-colour LED indicator • LED colour control via the bus • Low current consumption • Self-calibration of the sensor can be performed globally on all sensors at once or locally on a single sensor • Automatic temperature compensation • Wide measuring range • Protected against dust and moisture • Dupline® 3-wire bus system with power • Address coding with Carpark Configurator GP73800080 • GP6220 3301 has a built in red/green/amber LED indicator • GP6220 3302 has a built in red/green/blue LED indicator • GP6220 3303 has a built in red/blue/amber LED indicator • cULus approved Product Description Ordering key GP 6220 330x 724 GP6220330x is an ultrasonic sensor with a built-in3 col- our LED indicator and part of the Dupline®parking guid- ance system. TheGP6220330xsensor is installed in the middle of the ceiling above the parking bayanddetectswhethera car is parked in the bay. The parking bay status is indicat- ed using the built in LEDs. Thecolourofthebuilt-in LEDindicatoriscontrolled viathebusbyanexternal device (e.g. a PC or a PLC). Different colour combina- tionsareavailabletofacil- itatedifferentapplications. E.g.thecombination red/ green/ambercanbeused in a parking facility withan automated bookingsystem, and amber can indicate spaces booked for a specific event or for VIPs. Each sensor needs to be connectedtotheDupline® 3-wire bus. The bus pro- videspower andenables the sensors totransmitthe statusoftheparkingbays to the carpark monitoring devices (GP3482 9091 724- X), which keep track of the number of free parking bays in an area and show the result on the connected dis- plays. Type: Dupline® Housing Input type Addresses Inputs Supply Type Selection GP6220 3301 724 Sensor with red/green/amber LED GP6220 3302 724 Sensor with red/green/blue LED GP6220 3303 724 Sensor with red/blue/amber LED Input/Output Specifications Supply Specifications RJ12 connectorforaddressprogramming with Carpark Configurator GP7380 0080 2x3-pin connector • Printeddotonthe sensor is Dupline® + • D- or Gnd • POW (power from DMM or Coupler). See draw- ing on page 3 (System diagram) 1x2-pin connector Not in use. NOTE: The sensorconnectorsare usingthe“push-wire connection”methode. Use a 1.5 mm2single core wire for the sensor installation. Power supply: 21 VDC min. 30 VDC max. (Overvoltage category III (IEC60664)) Max. supply current20 mA Nominal Supply 28 VDC / 19 mA 0,53 W Specifications are subject to change without notice (05.08.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.