MAIN CHARACTERISTICS Output module HOUSING DIN-rail POWER SUPPLY AC I/O TYPE Relay output NUMBER OF I/O 8 Others MODULE TYPE Output module HOUSING H4 (W72) I/O TYPE 16A SPST relay POWER SUPPLY 115 VAC MAIN CHARACTERISTICS AC-powered output module with 8xSPST 16A Relay
Output Module Type G 3430 5545 Duline® FieldbusInstallationbus • 8-channel receiver • Relay load: 16A • Module load: 32A (16 A per relay) • Galvanically separated SPST relay outputs • H4-housing • For mounting on DIN-rail (EN 50022) • LED-indications for supply, Dupline® carrier and outputs • AC power supply • Address coding by GAP 1605 Product Description Ordering Key G 3430 5545 024 Dupline receiver®designedto be a part of the Dupline® concept for Building Automa- tion.SPST relay outputsfor Type Selection controlof8loadsofupto 250 VAC/16 A. Type: Dupline® H4-housing Receiver Number of channels Output type Power supply Supply Specifications (cont.) Supply Ordering no. 24 VACG3430 5545 024 115 VACG3430 5545 115 230 VACG3430 5545 230 Output Specifications Fail polarity state delay Upon loss of Dupline®carrier ≤ 20 ms Power ON delaytyp. 2s Indication for: Supply ONLED, Green Dupline®carrierLED, Yellow Output ONLED, red (one per output) Outputs8 SPST relays Contact ratings (AgSn02)µ (micro gap) Resistive loadsAC116 A Mechanical lifetime 5x106 operations Electrical lifetime1x105 operations/250 V, 12 A Minimum load 100 mA/12 V Operating frequency 60 operations/min. Dielectric voltage Outputs – Dupline® ≥ 4 kVAC (rms) Response time≤ 1 pulse train Supply Specifications Power SupplyOvervoltage cat. III (IEC 60664) Environment Degree of protection IP 20 Pollution degree 3 (IEC 60664) Operating temperature -5 to +50°C (+23° to +122°F) Storage temperature-50 to +85°C (-58° to +185°F) Humidity (non-condensing) 20 to 80% Mechanical resistance Shock5 G (11ms) Vibration 2 G (6 to 55Hz) Housing H4-housing Weight400 g Mode of Operation Rated operational voltage Through term. 21 & 22230 VAC, +/- 10% (IEC 60038) 115 VAC, +/- 10% (IEC 60038) 24 VAC, +/- 10% Frequency 45 to 65 Hz Rated operational powerTyp. 2,5 VA Power dissipation≤ 4 W Rated impulse withstand voltage 2304 kV 1152,5 kV 024800 V Dielectric voltage Supply – Dupline® ≥4 kVAC (rms) Supply – Outputs≥2 kVAC (rms) 8-channel receiver with 8 normally open contact out- puts.Each outputis coded by means ofthe codepro- grammer GAP 1605. For changing the default setting, please refer to the datasheet on GAP 1605. The outputs are normally OFF. When a transmitter coded to the selected chan- nel is activated, the output turns ON and remains ON until the respective channel becomesdeactivated.The default setting is such that upon loss of Dupline® carrier all the outputs go OFF. Note: At delivery some of the relays mightbeON dueto transportationbumps. To be sure that the relays are OFF, connect the module to power and Dupline and transmit on channels A1-8 once. Note:Due tothe construc- tion with bistable relays, the module is intended for heat- ing and light control only. Specifications are subject to change without notice (29.09.2005)1 Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.