G34305545115 CARLO GAVAZZI Paramètres sélectionnés CARACTERISTIQUES PRINCIPALES Module de sortie BOÎTIER rai..

Output Module
Type G 3430 5545
Du line®
Fieldbus Installationbus
• 8-channel receiver
• Relay load: 16A
• Module load: 32A (16 A per relay)
• Galvanically separated SPST relay outputs
• H4-housing
• For mounting on DIN-rail (EN 50022)
• LED-indications for supply, Dupline® carrier and outputs
• AC power supply
• Address coding by GAP 1605
Product Description Ordering Key
G 3430 5545 024
Dupline receiver®designed to be a part of the Dupline® concept for Building Automa- tion. SPST relay outputs for
Type Selection
control of 8 loads of up to
250 VAC/16 A.
Type: Dupline® H4-housing Receiver
Number of channels
Output type
Power supply
Supply Specifications (cont.)
Supply Ordering no.
24 VAC G3430 5545 024
115 VAC G3430 5545 115
230 VAC G3430 5545 230
Output Specifications
Fail polarity state delay
Upon loss of Dupline® carrier ≤ 20 ms
Power ON delay typ. 2s
Indication for:
Supply ON LED, Green
Dupline® carrier LED, Yellow
Output ON LED, red (one per output)
Outputs 8 SPST relays Contact ratings (AgSn02) µ (micro gap) Resistive loads AC1 16 A
Mechanical lifetime 5x106 operations
Electrical lifetime 1x105 operations/250 V, 12 A Minimum load 100 mA/12 V
Operating frequency 60 operations/min. Dielectric voltage
Outputs – Dupline® ≥ 4 kVAC (rms)
Response time ≤ 1 pulse train
Supply Specifications
Power Supply Overvoltage cat. III
(IEC 60664)
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664)
Operating temperature -5 to +50°C (+23° to +122°F) Storage temperature -50 to +85°C (-58° to +185°F)
Humidity (non-condensing) 20 to 80%
Mechanical resistance
Shock 5 G (11ms) Vibration 2 G (6 to 55Hz)
Housing H4-housing
Weight 400 g
Mode of Operation
Rated operational voltage
Through term. 21 & 22 230 VAC, +/- 10%
(IEC 60038)
115 VAC, +/- 10% (IEC 60038)
24 VAC, +/- 10%
Frequency 45 to 65 Hz Rated operational power Typ. 2,5 VA Power dissipation ≤ 4 W Rated impulse withstand
voltage 230 4 kV
115 2,5 kV
024 800 V Dielectric voltage
Supply – Dupline® ≥4 kVAC (rms) Supply – Outputs ≥2 kVAC (rms)
8-channel receiver with 8 normally open contact out- puts. Each output is coded by means of the code pro- grammer GAP 1605. For changing the default setting, please refer to the datasheet on GAP 1605.
The outputs are normally OFF. When a transmitter coded to the selected chan- nel is activated, the output turns ON and remains ON until the respective channel becomes deactivated. The
default setting is such that upon loss of Dupline® carrier all the outputs go OFF.
Note: At delivery some of the relays might be ON due to transportation bumps. To be sure that the relays are OFF, connect the module to power and Dupline and transmit on channels A1-8 once.
Note: Due to the construc- tion with bistable relays, the module is intended for heat- ing and light control only.
Specifications are subject to change without notice (29.09.2005) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group