Fire protection systems

Cable fire protection cushion small, 350x120x10, Grey, Glass mesh with special fire protection filling

KBK-1 fire insulation pad, small 350x120x10mm Glass fabric with fire protection filling,

PYROBAG® intumescent pads. Intumescent cable pad made of narrow, dense and mechanically solid mesh glass fabric, with a special filling. Without mineral fibers, weather resistant and water resistant. Indoor use. Unlimited storage in dry rooms and protected against frost.

Cable fire protection cushion large, 350x170x40, Grey, Glass mesh with special fire protection filling

KBK-3 fire insulation pad, large 350x170x40mm Glass fabric with fire protection filling,

PYROBAG® fire protection cushion. Cable fire protection cushions made of dense, closely knit and mechanically solid glass mesh with a special filling. Free from mineral fibres, weatherproof and water-resistant. For interior application.Can be stored for an unlimited period of time in dry, frost-free rooms.

BLOCK FOAM FBA-B200-14

FBA-B200-14 foam block, Intumescent 200x144x60mm Permanently elastic spongy material, closed porosity,

PYROPLUG® Block foam block. Permanently elastic soft foam block for cable and combination insulation. Possibility of longitudinal and transverse mounting to achieve different fire resistance classes. Can be combined with the 2-component PYROSIT® NG firefighting foam. Usable on solid ceilings and walls and on lightweight partition walls, and approved for many installations. Indoor use. CE marked construction product, with European approval according to ETA-15/0803 for applications with a fuge-resistant duration of up to 120 minutes. More detailed information about the applications can be found in the authorization documents. Protect the surface of the insulation against water with spongy materials to ensure proper expansion of the foam in the event of a fire. Conventional silicone coating

Pipe sleeve for combustible pipes, 50x26, Grey, Intumescent material

Pipe sleeve with 2 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M6 threaded rods.

Pipe sleeve for combustible pipes, 68x26, Grey, Intumescent material

Pipe sleeve with 2 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M6 threaded rods.

Pipe sleeve for combustible pipes, 106x26, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

Pipe sleeve for combustible pipes, 155x26,6, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

Pipe sleeve for combustible pipes, 200x40, Grey, Intumescent material

Pipe sleeve with 6 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

Pipe sleeve for combustible pipes, 264x40, Grey, Intumescent material

Pipe sleeve with 8 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

Calcium silicate plate for fire protect. applications, 500x150x20, Grey-white, Calcium silicate

Calcium silicate plate. Calcium silicate plate, as support plate, for the construction of frames in the penetration and to double thin wall thicknesses.Materials class EN 13501 - A1 non-combustible.

Insulation layer creator in a cartridge, 300ml, Intumescent material

Insulation layer creator in a cartridge. Dispersion-based fire protection compound for interior areas, to fill residual joints and close openings. Approved material for the closing of core drill holes when feeding through single cables and for closing the annular gap when exiting cables from the PYROLINE® Con PLC fire protection duct. Material class DIN 4102 - B2, normally flammable. In dry, frost-free rooms, the compound can be stored at temperatures from +5 °C to +25 °C for up to 18 months in closed, upright original containers.

Ablation coating in a cartridge, 300ml, Intumescent material

ASX-K intumescent paint, in 300ml cartridge Construction material,

Ablation coating PYROCOAT® in a cartridge. Combined, endothermic and weatherproof coating for internal and external areas, to fill residual joints. Universal protection coating for cable and cable support structures. Use as direct filler, and as paint when stirred.Material class DIN 4102 - B2, normally flammable.In dry, frost-free rooms, the coating can be stored at temperatures from +5 °C to +25 °C for up to 18 months in closed, upright original containers.

Fire protection filler in a cartridge, 310ml, Brown, Intumescent material

PYROPLUG® screed filler. Fire protection filler in a cartridgeUsable as small insulation and as joint closing compound in all insulation of the PYROPLUG® series.In dry, frost-free rooms, the fire protection filler can be stored for up to 12 months at a temperature of +5 °C to +30 °C.

Calcium silicate plate for fire protect. applications, 500x250x30, Grey-white, Calcium silicate

Calcium silicate plate. Calcium silicate plate, as support plate, for the construction of frames in the penetration and to double thin wall thicknesses.Materials class EN 13501 - A1 non-combustible.

Steel wire grid large, 1000x600mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Steel wire grid. Steel wire grid as support and protection grid, wire diameter 4 mm

Tightening strap , 100m, Steel, St

Kiinnitysvanne FSB-SB 100, 100m Steel, St,

Tension strap for fixing cable bandages

Securing clip , Stainless steel, grade 304, VA, 1.4301

Securing clip. Stainless steel clip to secure the bend tightening strap. Provides prevention of removal from the lock.

Fire protection box complete set,

Fire protection case. The PYROSIT® NG fire protection case contains all the required products to create foam insulations. The complete set contains 3 foam cartridges, 1 professional cartridge pistol, 6 mixing and 5 extension pipes. For interior application.

Pipe shell internally coated, Ø107x300, Grey, Polyvinylchloride, PVC

PYROCOMB® Intube pipe shell. Internally coated pipe shells with click lock. The inner space can be fitted with cables and electrical installation pipes completely. For interior application. CE-labelled, European approved construction product according to ETA-13/0904 and German general type approval. Fire resistance up to 120 minutes.Closing with 2 foam plugs included in the delivery. The surface seal is created with PYROCOAT® ASX coating.In some applications, the use of metallic tightening straps is prescribed to secure the pipe shells in light-duty partitions. Details can be found in the mounting instructions/approval.

Fire protection mortar for combination insulation, 20kg, Special mortar

PYROMIX® dry mortar in paper sack. Mortar to create cable and combination insulation in solid walls and ceilings. Suitable for pumping, pressing and for manual installation. Adding approx. 6 litres of water to 20 kg of dry mortar produces about 20 litres of workable compound. For interior application.In dry, frost-free rooms, the dry mortar can be stored for at least 12 months in closed original containers.

STOPPER INTUMESCENT FBA-SN78

FBA-SN78 Intumescent Cap Ø78x70mm brown Permanently elastic spongy material, with closed porosity

BLOCK SEALING FBA-BV200-14

PYROPLUG® Block vacuum block. Vacuum-packed version of the FBA-B200-14 foam block for the simple closure of the residual gap in the PYROPLUG® Block combination insulation. After mounting has been completed, the film is cut and the block expands to its original size again. The film can remain in the insulation. For interior application.

STOPPER INTUMESCENT FBA-SN122

FBA-SN122 Intumescent Cap Ø122x70mm brown Permanently elastic spongy material, with closed porosity

STOPPER INTUMESCENT FBA-SN134

PYROPLUG® Peg plugs. Plug for cable insulation.Protect the FBA plugs against water in order to guarantee safe foaming in case of fire.

Pipe sleeve for combustible pipes, 328x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

Pipe sleeve for combustible pipes, 378x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

Pipe sleeve for combustible pipes, 417x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

Pipe sleeve for combustible pipes, 504x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

Steel wire grid small, 600x500mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

SDG SDG-1, Small 600x500mm Steel, St, Hot Dipped Galvanized, DIN EN ISO 1461

Steel Armor Grating

Fire protection duct I90/E30 , 50x60mm, Grey, Glass-fibre lightweight concrete

Fire protection duct I90/E30 , 50x210mm, Grey, Glass-fibre lightweight concrete

Fire protection duct I90/E30 , 105x260mm, Grey, Glass-fibre lightweight concrete

Fire protection duct I120/E90 , 50x110mm, Grey, Glass-fibre lightweight concrete

Fire protection duct PYROLINE® Con D BSK I120/E90. Fire protection duct made from water and frost-proof fibreglass light concrete of building material class A1 according to EN 13501-1 for fireproof laying of cables in rescue and emergency routes, and for the maintenance of electrical functionality of safety-relevant systems. Classification I120 as I duct according to DIN 4102 Part 11 and classification E90 as E duct according to DIN 4102 Part 12.Mounting of the duct directly on walls or under ceilings.Including countersunk head screws and sealing strips.

Fire protection duct I120/E90 , 105x160mm, Grey, Glass-fibre lightweight concrete

End piece for BSK I90/E30, 95x120, Grey, Glass-fibre lightweight concrete

End piece for BSK I90/E30, 95x270, Grey, Glass-fibre lightweight concrete

End piece for BSK I90/E30, 150x320, Grey, Glass-fibre lightweight concrete

End piece for BSK I120/E90, 130x230, Grey, Glass-fibre lightweight concrete

End piece for PYROLINE® Con D BSK I120/E90. End piece for PYROLINE® Con D BSK I120/EI90 fire protection duct, consisting of fibreglass lightweight concrete which is resistant to water and frost for closing the duct ends.Including countersunk head screws and a stick-on sealing strip.

End piece for BSK I120/E90, 185x280, Grey, Glass-fibre lightweight concrete

Separating bracket for BSK fire protection duct, 46x37,5mm, Strip-galvanised, DIN EN 10147, Steel, St

Separating bracket for wall mounting. Separating bracket as installation aid when mounting the PYROLINE® Con D BSK, type BSK 090511 and type BSK 120511, fire protection duct on the wall. Mounting of the bracket directly on the fastening anchors of the fire protection duct.

Separating bracket for BSK fire protection duct, 101x50mm, Strip-galvanised, DIN EN 10147, Steel, St

Separating strap for BSK fire protection duct, 46x55mm, Strip-galvanised, DIN EN 10147, Steel, St

Separating strap for BSK fire protection duct, 101x80mm, Strip-galvanised, DIN EN 10147, Steel, St

Sealing strips for BSK I90/E30, 5x30mm, Grey, Foam

Doubler for BSK I90, 80x80x20, Grey, Glass-fibre lightweight concrete

Fire protection duct mortar prepared dry mortar in bucket, 3,5kg, Grey, Special mortar

Fire protection duct mortar. Dried mortar in a bucket for filling joints and small cracks when mounting the PYROLINE® Con D and PYROLINE® Con S fire protection ducts.

Wall connection collar for BSK I90, Grey, Glass-fibre lightweight concrete

Wall connection collar for BSK I90, Grey, Glass-fibre lightweight concrete

Fire protection duct I30-I120 with inner coating, 70x110x2000, Strip-galvanised, DIN EN 10147, Steel, St

Connector with seal for corner mounting, 70x110, Strip-galvanised, DIN EN 10147, Steel, St