Fire partitioning

7203840

VMS-TE 1

-

PUTTY FILLER DRY-VMS-YOU 1

7202553

FBA-SN65

-

STOPPER INTUMESCENT FBA-SN65

PYROPLUG® Peg plugs. Plug for cable insulation.Protect the FBA plugs against water in order to guarantee safe foaming in case of fire.

7202557

FBA-SN78

-

STOPPER INTUMESCENT FBA-SN78

FBA-SN78 Intumescent Cap Ø78x70mm brown Permanently elastic spongy material, with closed porosity

7202573

FBA-SN165

-

STOPPER INTUMESCENT FBA-SN165

FBA-SN165 Plug, Intumescent Ø165x70mm Permanently elastic spongy material, closed porosity,

PYROPLUG® Peg caps. Cable Insulation PlugsProtect FBA plugs from water to ensure proper foam expansion in the event of a fire.

7202577

FBA-SN200

-

STOPPER INTUMESCENT FBA-SN200

PYROPLUG® Peg plugs. Plug for cable insulation.Protect the FBA plugs against water in order to guarantee safe foaming in case of fire.

7202515

FBA-BV200-14

-

BLOCK SEALING FBA-BV200-14

PYROPLUG® Block vacuum block. Vacuum-packed version of the FBA-B200-14 foam block for the simple closure of the residual gap in the PYROPLUG® Block combination insulation. After mounting has been completed, the film is cut and the block expands to its original size again. The film can remain in the insulation. For interior application.

7202581

FBA-SN250

-

STOPPER INTUMESCENT FBA-SN250

PYROPLUG® Peg plugs. Plug for cable insulation.Protect the FBA plugs against water in order to guarantee safe foaming in case of fire.

7203843

VMS-TE 2

-

PUTTY FILLER DRY-VMS-TE 2

7202565

FBA-SN122

-

STOPPER INTUMESCENT FBA-SN122

FBA-SN122 Intumescent Cap Ø122x70mm brown Permanently elastic spongy material, with closed porosity

7202561

FBA-SN107

-

STOPPER INTUMESCENT FBA-SN107

PYROPLUG® Peg plugs. Plug for cable insulation.Protect the FBA plugs against water in order to guarantee safe foaming in case of fire.

7202569

FBA-SN134

-

STOPPER INTUMESCENT FBA-SN134

PYROPLUG® Peg plugs. Plug for cable insulation.Protect the FBA plugs against water in order to guarantee safe foaming in case of fire.

7202505

FBA-B200-14

-

BLOCK FOAM FBA-B200-14

FBA-B200-14 foam block, Intumescent 200x144x60mm Permanently elastic spongy material, closed porosity,

PYROPLUG® Block foam block. Permanently elastic soft foam block for cable and combination insulation. Possibility of longitudinal and transverse mounting to achieve different fire resistance classes. Can be combined with the 2-component PYROSIT® NG firefighting foam. Usable on solid ceilings and walls and on lightweight partition walls, and approved for many installations. Indoor use. CE marked construction product, with European approval according to ETA-15/0803 for applications with a fuge-resistant duration of up to 120 minutes. More detailed information about the applications can be found in the authorization documents. Protect the surface of the insulation against water with spongy materials to ensure proper expansion of the foam in the event of a fire. Conventional silicone coating

7202617

FBA-DR150

-

COVER TUBES FBA-DR150

FBA-DR150 tube cover, Ø78x150mm Permanently elastic spongy material, with closed porosity,

FBA-DR150 7202617 Empty mini pipe shell

7202200

TCX-032

-

Pipe sleeve for combustible pipes, 50x26, Grey, Intumescent material

Pipe sleeve with 2 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M6 threaded rods.

7202201

TCX-040

-

Pipe sleeve for combustible pipes, 58x26, Grey, Intumescent material

Pipe sleeve with 2 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M6 threaded rods.

7202203

TCX-050

-

Pipe sleeve for combustible pipes, 68x26, Grey, Intumescent material

Pipe sleeve with 2 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M6 threaded rods.

7202204

TCX-063

-

Pipe sleeve for combustible pipes, 94x26, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

7202205

TCX-075

-

Pipe sleeve for combustible pipes, 106x26, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

7202206

TCX-090

-

Pipe sleeve for combustible pipes, 132x26,6, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

7202207

TCX-110

-

Pipe sleeve for combustible pipes, 155x26,6, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

7202208

TCX-125

-

Pipe sleeve for combustible pipes, 172x40, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

7202209

TCX-140

-

Pipe sleeve for combustible pipes, 200x40, Grey, Intumescent material

Pipe sleeve with 6 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

7202210

TCX-160

-

Pipe sleeve for combustible pipes, 220x40, Grey, Intumescent material

Pipe sleeve with 6 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

7202212

TCX-180

-

Pipe sleeve for combustible pipes, 264x40, Grey, Intumescent material

Pipe sleeve with 8 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

7202213

TCX-225

-

Pipe sleeve for combustible pipes, 328x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

7202214

TCX-200

-

Pipe sleeve for combustible pipes, 284x40, Grey, Intumescent material

Pipe sleeve with 8 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

7202215

TCX-250

-

Pipe sleeve for combustible pipes, 353x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

7202216

TCX-280

-

Pipe sleeve for combustible pipes, 378x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

7202217

TCX-300

-

Pipe sleeve for combustible pipes, 403x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

7202218

TCX-315

-

Pipe sleeve for combustible pipes, 417x51,5, Strip-galvanised, DIN EN 10147, Intumescent material