Product successfully added to your shopping cart
PLC-OSC-LPE-24DC/48DC/100
2903171
PHOENIX_CONTACT
1
Single-channel pulse expansion module, input: 24 V DC, output: 3 - 48 V DC/100 mA, supply: 24 V DC, screw connection
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
DIP switch settings:
Function
DIP A low - no restart when triggered again (default)
DIP A high - restart when triggered again
DIP B low - input pulse time > 2 ms (default)
DIP B high - input pulse time > 100 us
Pulse expansion times
DIP 1 - 10 ms
DIP 2 - 20 ms
DIP 3 - 40 ms
DIP 4 - 80 ms
DIP 5 - 160 ms
DIP 6 - 320 ms
DIP 7 - 640 ms
DIP 8 - 1280 ms
No DIP switch set: no switching function for the output
If the input signal is longer than the selected time, the output is switched off after removal of the input signal.
The settings are applied after a voltage reset of the rated control supply voltage.
Width | 6.2 mm |
---|---|
Height | 80 mm |
Depth | 86 mm |
Ambient temperature (operation) | -25 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -25 °C ... 75 °C |
Degree of protection | IP20 |
"0" signal switching threshold in reference to UC | < 0.4 |
---|---|
"1" signal switching threshold in reference to UC | > 0.8 |
Status display | Yellow LED |
Operating voltage display | Green LED |
Type of protection | Protection against polarity reversal |
Surge protection | |
Surge voltage protection | > 33 V DC |
Output voltage range | 3 V DC ... 48 V DC |
---|---|
Limiting continuous current | 100 mA |
Surge voltage protection | > 54 V DC |
Voltage drop at max. limiting continuous current | < 1 V DC |
Output circuit | 3-conductor, ground-referenced |
Type of protection | Protection against polarity reversal |
Surge protection | |
Free running |
Connection name | Input side |
---|---|
Connection method | Screw connection |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 |
Test voltage input/output | 2.5 kVrms(50 Hz, 1 min.) |
---|---|
Mounting position | any |
Assembly instructions | In rows with zero spacing |
Operating mode | 100% operating factor |
Designation | Air clearances and creepage distances between the power circuits |
Standards/regulations | DIN EN 50178 |
Rated insulation voltage | 50 V DC |
Pollution degree | 2 |
Overvoltage category | II |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2903171-PLC-OSC-LPE-24DC/48DC/100 | 120 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.