Product name
Eaton Moeller® series M22 Housing
Product Length/Depth
80 millimetre
Product height
70 millimetre
Product width
153 millimetre
Product weight
0.317 kilogram
Compliances
Contact Manufacturer
Certifications
UL 508
IEC/EN 60947-5
VDE 0660
UL File No.: E29184
CE
CSA File No.: 012528
CSA-C22.2 No. 14-05
CSA Class No.: 3211-03
UL
IEC/EN 60947
CSA
CSA-C22.2 No. 94-91
UL Category Control No.: NKCR
Catalog Notes
85 - 264 V AC
Contacts with safety function, by positive opening to IEC/EN 60947-5-1
LED element
Enclosure material
Plastic
Knockouts
2 x M20 (cable entry knockouts at the base)
2 x M25/20 (cable entry knockouts at the side)
Degree of protection
IP67/IP69K
NEMA 4X, 13
Lifespan
5,000,000 mechanical Operations
Operating frequency
3600 Operations/h
Product category
RMQ-Titan
Size
Front dimensions: 153 x 80 mm
Type
Indicator lights
Pushbutton actuator
Ambient conditions, mechanical
Mounting position
As required
Shock resistance
Mechanical, According to IEC/EN 60068-2-27
30 g, Mechanical, According to IEC/EN 60068-2-27, Sinusoidal shock 11 ms
Climatic environmental conditions
Ambient operating temperature - min
-25 °C
Ambient operating temperature - max
70 °C
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Rated control supply voltage (Us) at AC, 50 Hz - min
85 V
Rated control supply voltage (Us) at AC, 50 Hz - max
264 V
Rated control supply voltage (Us) at AC, 60 Hz - min
85 V
Rated control supply voltage (Us) at AC, 60 Hz - max
264 V
Rated control supply voltage (Us) at DC - min
0 V
Rated control supply voltage (Us) at DC - max
0 V
Rated conditional short-circuit current (Iq)
1 kA
Connection to SmartWire-DT
No
Connection type
Screw connection
Actuator color
Red/white/green
Actuator function
Momentary
Actuator travel and actuation force (DIN EN 60947-5-1)
4.8 mm
Force for positive opening - min
15 N
Number of contacts (change-over contacts)
0
Number of contacts (normally closed contacts)
2
Number of contacts (normally open contacts)
2
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0.11 W
Rated operational current for specified heat dissipation (In)
6 A
Static heat dissipation, non-current-dependent Pvs
1 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.