SACCBP-M12FS-8CON-M16/0,17-94B 1417264 PHOENIX CONTACT Sistema de ônibus flush-tipo de soquete, Ethernet, de.. Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

SACCBP-M12FS-8CON-M16/0,17-94B 1417264 PHOENIX CONTACT Sistema de ônibus flush-tipo de soquete, Ethernet, de..

SACCBP-M12FS-8CON-M16/0,17-94B

1417264

PHOENIX_CONTACT

50

Sistema de ônibus flush-tipo de soquete, Ethernet, de 8 pos., M12, blindado, traseira/parafuso de montagem com rosca M16, com 1 m de barramento, cabo 4 x 2 x 0.26 mm2

Fêmea de montagem embutida para sistema de barramento, Ethernet, 8 polos, M12, blindada, montagem na parede traseira/montagem aparafusada com rosca M16, com cabo de barramento de 1 m, 4 x 2 x 0,26 mm²

Device connector rear mounting, 8-position, PUR, water blue RAL 5021, Socket, straight, M12, coding: A, on free cable end, cable length: 0.17 m, 0.14 mm2, Ethernet, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239165

Mais detalhes


Sensores > Base de ligação para sensores e atuadores

Conexão de dispositivos de campo

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

* Este artigo pode estar obsoleto. Se você estiver interessado, insira seu e-mail e informaremos se há unidades disponíveis. Caso não existam mais, um dos nossos técnicos procurará uma alternativa fornecivel com características semelhantes.

Se o nosso preço não é o melhor, peça-nos uma cotação Solicitar uma cotação

Best sellers

Mais informação



Dados técnicos

Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information:Lock nut is included in the scope of delivery

Mounting
Mounting typeRear mounting, M16 x 1.5 thread with flat nut

Product properties
Product typeCircular connectors (device side)
Number of positions8
No. of cable outlets1
Shieldedyes
CodingA
Insulation characteristics
Overvoltage categoryII
Degree of pollution3

Material specifications
Flammability rating according to UL 94V0
Seal materialNBR
Contact materialCuZn
Contact surface materialNi/Au
Contact carrier materialPA 6.6
Material for screw connectionBrass, nickel-plated
Outer sheath, materialPUR
Conductor materialBare Cu litz wires

Electrical properties
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN48 V AC
60 V DC
Nominal current IN2 A
Transmission characteristics (category)CAT5 (IEC 11801:2002)
Wave impedance100 Ω
Max. conductor resistance150 mΩ/m

Connector
Connection 1
Head designSocket
Head cable outletstraight
Head thread typeM12
CodingA
Connection 2
Head designfree cable end

Cable/line
Cable length0.17 m
Ethernet flexible CAT5, 4-pair [94B]
Desenho cotadoschbwmdziw.jpg
Cable weight47 kg/km
UL AWM Style20963 (80°C/30 V)
Number of positions8
Shieldedyes
Cable typeEthernet flexible CAT5, 4-pair [94B]
Conductor structure4x2xAWG26/7, SF/UTP
Signal runtime5.3 ns/m
Conductor structure signal line7x 0.16 mm
AWG signal line26
Conductor cross section4x 2x 0.14 mm²
Wire diameter incl. insulation0.96 mm
External cable diameter6.40 mm ±0.2 mm
Outer sheath, materialPUR
External sheath, colorwater blue RAL 5021
Conductor materialBare Cu litz wires
Material wire insulationFoamed PE
Single wire, colorwhite/blue-blue, white/orange-orange, white/green-green, white/brown-brown
Thickness, outer sheath1.05 mm
Twisted pairs2 cores to the pair
Overall twist4 pairs for core
Optical shield covering70 %
Insulation resistance≥ 5 GΩ*km
Coupling resistance≤ 100.00 mΩ/m (at 10 MHz)
Loop resistance≤ 290.00 Ω/km
Wave impedance100 Ω ±5 Ω (at 100 MHz)
Cable capacity48 nF/km (at 1 kHz)
Nominal voltage, cable≤ 100 V
Test voltage Core/Core700 V (50 Hz, 1 min.)
Test voltage Core/Shield700.00 V (50 Hz, 1 min.)
Minimum bending radius, fixed installation4 x D
Minimum bending radius, flexible installation8 x D
Smallest bending radius, fixed installation26 mm
Smallest bending radius, movable installation52 mm
Tensile strength≤ 100 N
Near end crosstalk attenuation (NEXT)71.3 dB (with 1 MHz)
62.3 dB (at 4 МHz)
56.3 dB (at 10 MHz)
53.2 dB (at 16 MHz)
51.8 dB (at 20 МHz)
48.9 dB (at 31.25 МHz)
44.4 dB (at 62.5 МHz)
41.3 dB (at 100 MHz)
Power-summated near end crosstalk attenuation (PSNEXT)62.3 dB (with 1 MHz)
53.3 dB (at 4 МHz)
47.3 dB (at 10 MHz)
44.2 dB (at 16 MHz)
42.8 dB (at 20 МHz)
39.9 dB (at 31.25 МHz)
35.4 dB (at 62.5 МHz)
32.3 dB (at 100 MHz)
Return attenuation (RL)23 dB (at 4 МHz)
24.1 dB (at 8 МHz)
25 dB (at 10 MHz)
25 dB (at 16 MHz)
25 dB (at 20 МHz)
23.6 dB (at 31.25 МHz)
21.5 dB (at 62.5 МHz)
20.1 dB (at 100 MHz)
Shield attenuation3.2 dB (with 1 MHz)
6 dB (at 4 МHz)
9.5 dB (at 10 MHz)
12.1 dB (at 16 MHz)
13.6 dB (at 20 МHz)
17.1 dB (at 31.25 МHz)
24.8 dB (at 62.5 МHz)
32 dB (at 100 MHz)
Halogen-freeaccording to IEC 60754-1
Flame resistanceaccording to IEC 60332-1-2
Resistance to oilin accordance with EN 60811-2-1
Ambient temperature (operation)-40 °C ... 80 °C (cable, fixed installation)
-20 °C ... 80 °C (Cable, flexible installation)
Ambient temperature (installation)-20 °C ... 80 °C

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation)-25 °C ... 90 °C (Plug / socket)
-40 °C ... 70 °C (cable, fixed installation)
-10 °C ... 50 °C (Cable, flexible installation)

Datasheet - PDF

Título: Tamanho: Tipo:
PDF CATALOG PHOENIX CONNECTORS EN.pdf 68 Mbytes

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.