ST-8ES1N8A8003S 1613620 PHOENIX CONTACT Conector de encaixe para cabos Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

ST-8ES1N8A8003S 1613620 PHOENIX CONTACT Conector de encaixe para cabos

ST-8ES1N8A8003S

1613620

PHOENIX_CONTACT

Produto sob demanda, sem reembolso.

Conector de encaixe para cabos

Conector de cabo, reto, SPEEDCON, M17, número de pólos: 5+3+PE, tipo de contato: Fêmea, blindado: sim, tamanho do flange: 25,75 mm x 25,75 mm, índice de proteção: IP67, faixa de diâmetro do cabo: 5 mm ... 8 mm, número de polos: 9, tipo de conexão: Conexão ondulada, série: ST, Produto alternativo de acordo com RoHS II sem exceção 6c (Pb< 0,1%) código do item: 1242803

Cable connector, straight, SPEEDCON, M17, number of positions: 5+3+PE, contact connection type: Socket, shielded: yes, degree of protection: IP67, cable diameter range: 5 mm ... 8 mm, number of positions: 9, connection method: Crimp connection, series: ST, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1242803

Mais detalhes


Conectores > Conector redondo, montagem em campo (conector industrial)

Conexão de dispositivos de campo

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

* Este artigo pode estar obsoleto. Se você estiver interessado, insira seu e-mail e informaremos se há unidades disponíveis. Caso não existam mais, um dos nossos técnicos procurará uma alternativa fornecivel com características semelhantes.

Se o nosso preço não é o melhor, peça-nos uma cotação Solicitar uma cotação

Related products

Best sellers

Mais informação



Dados técnicos

Notes
Order information:Order crimp contacts 5 x 0.6 mm, 4 x Ø 1 mm separately
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Product properties
Product typeCircular connector (cable-side)
SeriesST
ApplicationPower
Number of positions9
Connection profile5+3+PE
Shieldedyes
CodingN
Thread typeM17
Data management status
Article revision16

Material specifications
Seal materialFPM
Housing materialMetal
Housing materialTurned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD-Zn)

Connection data
Conductor connection
Connection methodCrimp connection

Electrical properties
Contact
Max. current14 A
Nominal voltage UN630 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage6 kV
Contact
Max. current3.6 A
Nominal voltage UN60 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage1.5 kV

Connector
Typestraight
Direction of rotationStandard
Connection 1
Head designSocket

Cable/line
External cable diameter5 mm ... 8 mm

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
Ambient temperature (operation)-40 °C ... 125 °C
Ambient temperature (storage/transport)15 °C ... 25 °C
Altitude2000 m
Permissible humidity (storage/transport)50 % ... 65 %

ETIM for 1613620 Ligadores (EC002635)
Característica Valor
Tipo de contacto (EF001587) Outro
Número de contatos de dados (EF012232) 0
Número de contatos de potência (EF012216) 0
Número de contatos de controlo (EF012217) 9
Para diâmetro externo do cabo (EF009475) 5 mm
Tipo de invólucro (EF006980) Direito
Temperatura ambiente (EF002386) -40 °C
Tensão especificada de funcionamento (EF000228) 630 V
Acabamento da conexão elétrica (EF003961) Conexão por cravação
Tipo de fecho (EF000208) Outro
Com condutor de proteção (EF007468) Não
Grau de proteção (IP), montado (EF007466) IP67
Blindado (EF000881) Sim
Com indicação de estado (EF001602) Não

Datasheet - PDF

Título: Tamanho: Tipo:
PDF CATALOG PHOENIX CONNECTORS EN.pdf 68 Mbytes

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.