Sem produtos

$0.00 Total

Encomendar

Produto adicionado com sucesso ao seu carrinho de compras

Quantidade

Total

Existem 0 produtos no seu carrinho de compras. Existe um produto no seu carrinho de compras.

Total produtos

Total

Continuar a comprar Vá o carrinho

Ver maior As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

FKC 2,5/ 3-ST-5,08 BD:X5 SO 1858234 PHOENIX CONTACT Conector para placa de circuito impresso, corrente nomin..

0/5 - 0 Opiniones

Referência: FKC 2,5/ 3-ST-5,08 BD:X5 SO

Código: 1858234

Fabricante: PHOENIX_CONTACT

Unidades por pacote 50

Descrição:

Conector para placa de circuito impresso, corrente nominal: 12 A, tensão de teste (III/2): 320 V, número de polos: 3, passo: 5,08 mm, tipo de conexão: Conexão push-in por mola, cor: verde, superfície de contato: Estanho

PCB connector, nominal current: 12 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 3, pitch: 5.08 mm, connection method: Push-in spring connection, color: green, contact surface: Tin

Mais detalhes

Categorias:

Conectores PCB

* Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

Garantía, reparação e devolução.

Mais informação

▲

Dados comerciais

Chave de encomenda	1858234
Quantidade de embalagem	1
GTIN (EAN)	4055626132433
Número do imposto alfandegário	85366990

Desenhos
Electrical parameters
Material data - contact
Material data – actuating element
Packaging information
Ambient conditions
Pull-out test
Air clearances and creepage distances
Temperature cycles
Durability tests (B)
Environmental and durability tests (E)
Classificações

Item properties
Connection capacity
Material data - housing
Dimensions for the product
General product information
Termination and connection method
Mechanical tests according to standard
Electrical tests - Function
Mechanical tests (A)
Climatic tests (D)
Environmental Product Compliance

Desenhos


Diagram Type: FKC 2,5/...-ST-5,08 with CC 2,5/...-G-5,08 P26THR		Diagram Type: FKC 2,5/...-ST-5,08 with CCV 2,5/...-G-5,08 P26THR

Diagram Type: FKC 2,5/...-ST-5,08 with CCA 2,5/...-G-5,08 P26THR		Diagram Type: FKC 2,5/...-ST-5,08 with CCVA 2,5/...-G-5,08 P26THR

Diagram Type: FKC 2,5/...-ST-5,08 with MDSTBVA 2,5/...-G-5,08		Diagram Type: FKC 2,5/...-ST-5,08 with MDSTB 2,5/...-G-5,08

Brief article description	Printed-circuit board connector
Plug-in system	CLASSIC COMBICON
Type of contact	Female connector
Range of articles	FKC 2,5/..-ST
Pitch	5.08 mm
Number of positions	3
Connection method	Push-in spring connection
Number of levels	1
Number of connections	3
Number of potentials	3

Nominal current	12 A
Nom. voltage	320 V
Rated voltage	320 V
Rated voltage (III/2)	320 V
Rated voltage (II/2)	630 V
Rated surge voltage (III/3)	4 kV
Rated surge voltage (III/2)	4 kV
Rated surge voltage (II/2)	4 kV

Connection method	Push-in spring connection
pluggable	Yes
Conductor cross section solid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG / kcmil	24 ... 12
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve	0.5 mm² ... 1.5 mm²
Stripping length	10 mm

Note	WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material	Cu alloy
Surface characteristics	hot-dip tin-plated
Metal surface terminal point (top layer)	Tin (4 - 8 µm Sn)
Metal surface contact area (top layer)	Tin (4 - 8 µm Sn)

Housing color	green (6021)
Insulating material	PA
Insulating material group	I
CTI according to IEC 60112	600
Flammability rating according to UL 94	V0
Glow wire flammability index GWFI according to EN 60695-2-12	850
Glow wire ignition temperature GWIT according to EN 60695-2-13	775
Temperature for the ball pressure test according to EN 60695-10-2	125 °C

Length [ l ]	25.73 mm
Width [ w ]	15.86 mm
Height [ h ]	15 mm
Pitch	5.08 mm
Height (without solder pin)	15 mm
Dimension a	10.16 mm

Type of packaging	packed in cardboard
Pieces per package	50
Denomination packing units	Pcs.

Type of note	Notes on operation
Note	In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load.

Ambient temperature (storage/transport)	-40 °C ... 70 °C
Ambient temperature (assembly)	-5 °C ... 100 °C
Ambient temperature (operation)	-40 °C ... 100 °C (dependent on the derating curve)


Conductor connection test	The stripped-off ends of the largest conductor can be completely inserted in the opening of the terminal point without using excessive force.
Test result	Test passed
Test – repeated connection and release	IEC 60999-1:1999-11
	Test passed
Test for conductor damage and slackening	IEC 60999-1:1999-11
	Test passed

Visual examination	Test passed IEC 60512-1-1:2002-02
Dimensional test	Test passed IEC 60512-1-2:2002-02
Resistance of marking	Test passed IEC 60068-2-70:1995-12
Result	Test passed
Specification	IEC 60512-13-2:2006-02
No. of cycles	25
Insertion strength per pos. approx.	8 N
Withdraw strength per pos. approx.	6 N
Polarization and coding	Test passed IEC 60512-13-5:2006-02
Result	Test passed
Specification	IEC 60512-15-1:2008-05
Test force per pos.	34 N

Clearances and creepage distances	IEC 60664-1:2007-04
Specification	IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3)	3 mm
Minimum clearance - inhomogeneous field (III/2)	3 mm
Minimum clearance - inhomogeneous field (II/2)	3 mm
Minimum creepage distance value (III/3)	4 mm
Minimum creepage distance value (III/2)	3 mm
Minimum creepage distance value (II/2)	3.2 mm

Insertion strength per pos. approx.	8 N
Withdraw strength per pos. approx.	6 N
Polarization when inserted requirement >20 N	Test passed
Contact holder in insert requirements >20 N	Test passed

Specification	IEC 60512-9-1:2010-03
Contact resistance R₁	1 mΩ
Insertion/withdrawal cycles	25
Contact resistance R₂	1.1 mΩ
Impulse withstand voltage at sea level	4.8 kV
Power-frequency withstand voltage	2.21 kV
Insulation resistance, neighboring positions	> 0,4 TΩ

Specification	IEC 60999-1:1999-11
Test current (minimum cross section)	4 A AC
Test current (maximum cross section)	12 A AC
Temperature cycles	192

Specification	ISO 6988:1985-02
Cold stress	-40 °C/2 h
Thermal stress	100 °C/168 h
Corrosive stress	0.2 dm³SO₂on 300 dm³/40 °C/1 cycle
Impulse withstand voltage at sea level	4.8 kV
Power-frequency withstand voltage	2.21 kV

Specification	IEC 61984:2008-10
Result, degree of protection, IP code	Finger safety with IP20 test finger

China RoHS	Environmentally friendly use period: unlimited = EFUP-e
	No hazardous substances above threshold values

eCl@ss 4.0	27260700
eCl@ss 4.1	27260700
eCl@ss 5.0	27260700
eCl@ss 5.1	27260700
eCl@ss 6.0	27260700
eCl@ss 7.0	27440309
eCl@ss 8.0	27440309
eCl@ss 9.0	27440309

UNSPSC 13.2	39121409
UNSPSC 18.0	39121409
UNSPSC 19.0	39121409
UNSPSC 20.0	39121409
UNSPSC 21.0	39121409

Avaliação:
Nome:
Email:
Título:
Opinión:
Você recomendaria esse produto para comprar? Sim Não

	Adicionar avaliação

FKC 2,5/ 3-ST-5,08 BD:X5 SO 1858234 PHOENIX CONTACT Conector para placa de circuito impresso, corrente nomin..

PRODUTOS VISUALIZADOS

FKC 2,5/ 3-ST-5,08...

Mais informação

Dados comerciais

Desenhos

Item properties

Electrical parameters

Connection capacity

Material data - contact

Material data - housing

Material data – actuating element

Dimensions for the product

Packaging information

General product information

Ambient conditions

Termination and connection method

Pull-out test

Mechanical tests according to standard

Air clearances and creepage distances

Electrical tests - Function

Temperature cycles

Mechanical tests (A)

Durability tests (B)

Climatic tests (D)

Environmental and durability tests (E)

Environmental Product Compliance

Classificações

eCl@ss

ETIM

UNSPSC

Datasheet - PDF

Avaliações: (0) ▲

Últimas opiniões dos nossos clientes