CHARX T2HBI24-DC200-6,0M2 1396658 PHOENIX CONTACT CONEXÃO CHARX, Entrada do veículo, Atuador de travamento d.. Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

CHARX T2HBI24-DC200-6,0M2 1396658 PHOENIX CONTACT CONEXÃO CHARX, Entrada do veículo, Atuador de travamento d..

CHARX T2HBI24-DC200-6,0M2

1396658

PHOENIX_CONTACT

CONEXÃO CHARX, Entrada do veículo, Atuador de travamento direito, para carregamento com corrente direta (DC), para instalação em veículos elétricos (EV), Sistema de Carregamento Combinado, CCS tipo 2, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), comprimento: 6 m, M6, Geração 4, Para contatos DC um tampa está incluído no volume de fornecimento.

CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), Single wires, length: 6 m, locking actuator: 24 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC contacts.

Mais detalhes


Mobilidade Eletrônica

* Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

Preço total: $1,042.89
Preço unitário: $1,042.89

*Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Se o nosso preço não é o melhor, peça-nos uma cotação Solicitar uma cotação

Related products

Best sellers

Mais informação



Dados técnicos

Notes
GeneralA protective cap is supplied as standard for the DC contacts.

Product properties
Product typeVehicle charging inlet
Product familyCHARX connect universal
Applicationfor charging with direct current (DC)
for installation in electric vehicles (EV)
TechnologyCombined Charging System
Charging standardCCS type 2
Charging modeMode 4

Electrical properties
Type of signal transmissionPulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121
Note on the connection methodCrimp connection, cannot be disconnected
Insulation resistance> 200 MΩ
Coding4.7 kΩ (between PE and PP)
Temperature measurementDC contacts: 2x PT1000 (DIN EN 60751)
Type of charging currentDC
Charging power200 kW
Charging current200 A
Type of charging currentDC Boost Mode
Charging powerup to 500 kW (Boost Mode, depending on the ambient conditions. For detailed information, see the packing slip in the download area for this item.)
Charging currentup to 500 A (Boost Mode, depending on the ambient conditions. For detailed information, see the packing slip in the download area for this item.)
Power contact
Number3 (PE, DC+, DC-)
Rated voltage1000 V DC
Rated current200 A DC
Signal contact
Number2 (CP, PP)
Rated voltage30 V AC
Rated current2 A
Temperature sensors (Pt 1000)
Sensor typePt 1000
Standards/regulationsDIN EN 60751
Attachment point2 sensors for the DC contacts
Locking actuator
Operating voltage24 V
Note number of positions4-pos.
Position of the locking actuatorright-side
Locking actuator
Operating voltage24 V
Note number of positions4-pos.
Position of the locking actuatorright-side
Possible power supply range at the motor22 V ... 26 V
Maximum voltage for locking detection30 V
Typical motor current for locking0.05 A
Reverse current of the motormax. 0.5 A
Max. dwell time with reverse current1 s
Recommended adaptation time600 ms
Pause time after entry or exit path3 s
Service life insertion cycles> 10000 load cycles
Lock recognitionavailable
Mechanical emergency releaseavailable
Ambient temperature (operation)-30 °C ... 50 °C

Connection data
Cross section AWG(converted acc. to IEC)

Dimensions
Width117.65 mm
Height90 mm
Depth117.65 mm

Material specifications
Color (Housing)black (9005)
Color (Mating face)black (9005)
Material (Housing)Plastic
Material (Contact surface)Silver

Cable/line
Cable length6 m
Cable typeSingle wires
Single-core wires for DC
Cable length6 m
Cable structure2 x 70 mm²
Single wire, materialSilicone
Single wire, colorOG
External cable diameter17.9 mm ±0.3 mm
Cable resistance≤ 0.259 Ω/km
Single-core wire for PE
Cable length6 m
Cable structure1 x 25 mm²
Single wire, materialSilicone
Single wire, colorGN/YE
External cable diameter8.6 mm ±0.1 mm
Cable resistance≤ 0.743 Ω/km
Single-core wires for locking actuator
Cable length0.5 m
Cable structure4 x 0.5 mm²
Single wire, materialPVC
Single wire, colorBU/RD, BU/GN, BU/YE, BU/BN
External cable diameter1.6 mm ±0.20 mm
Cable resistance≤ 37.1 Ω/m
Single-core wires for Pt 1000 temperature sensors
Cable length1 m
Cable structure3 x 0.5 mm²
Single wire, materialPVC
Single wire, colorBN
GN
YE
External cable diameter1.6 mm ±0.20 mm
Cable resistance≤ 37.1 Ω/m
Single-core wires for communication
Cable length1 m
Cable structure2 x 0.5 mm²
Single wire, materialPVC
Single wire, colorBK
WH
External cable diameter1.6 mm ±0.20 mm
Cable resistance≤ 37.1 Ω/m

Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 10000
Insertion force< 100 N
Withdrawal force< 100 N

Environmental and real-life conditions
Ambient conditions
Degree of protection (Vehicle charging inlet)IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
IP67 (Inner area of vehicle charging inlet)
Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Altitude4000 m (above sea level)

Standards and regulations
Standards
Standards/regulationsIEC 62196-2
IEC 62196-3

Mounting
Mounting typeFront and rear mounting (0 to 90 degree frontal inclination possible)
Mounting hole diameter6.70 mm (ø)
Fixing screwsM6
Screws included in the scope of deliverynone

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.