Prodotto aggiunto al tuo carrello
BP-O-800/10-FLAT
113174
EATON-MOELLER
1
Surface-mount service distribution board with three-point turn-lock - flat pack, w 800 mm H 1060 mm 210 SU
Scatole e armadi industriali
* Prodotto nuovo nel suo imballaggio d'origine con tutte le garanzie e certificazioni de EATON-MOELLER
Grazie per il suo interesse nei nostri prodotti, speriamo che il tempo di consegna indicato sia conveniente per lei.
Durante l’elaborazione dell’ordine potrà selezionare il tipo di invio che meglio si adatti alle sue necessità: Aéreo Express 24Hrs, Terrestre Standard 48/72Hrs, etc.
Technical data for design verification | |||
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees, calculated as per IEC 60890 | |||
Individual enclosure for wall mounting | PV | CO | 95 |
Starting enclosure for wall mounting | PV | CO | 90 |
Middle enclosure for wall mounting | PV | CO | 86 |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees, calculated as per IEC 60890 | |||
Individual enclosure for wall mounting | PV | CO | 191 |
Starting enclosure for wall mounting | PV | CO | 181 |
Middle enclosure for wall mounting | PV | CO | 173 |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Not relevant to indoor installations. | ||
10.2.5 Lifting | Does not apply to enclosures without lifting aids. | ||
10.2.6 Mechanical impact | IK07 | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | IP30 | ||
10.4 Clearances and creepage distances | Is the panel builder's responsibility. | ||
10.5 Protection against electric shock | < 0.1 Ω; meets the product standard's requirements. | ||
10.6 Incorporation of switching devices and components | Is the panel builder's responsibility. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Ui= 440 V AC | ||
10.9.3 Impulse withstand voltage | 4 kV | ||
10.9.4 Testing of enclosures made of insulating material | Does not apply to metal enclosures. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. | ||
10.13 Mechanical function | Meets the product standard's requirements. |
Distribution boards (EG000023) / Small distribution board (EC000214) | |||
Electric engineering, automation, process control engineering / Electrical installation, device / Electrical distribution system (incl. small distribution board) / Small distribution board ([email protected] [ACN387008]) | |||
Mounting method | Surface mounting | ||
Number of rows | 7 | ||
Width in number of modular spacings | 35 | ||
Type of cover | Door | ||
Cover model | Closed | ||
Transparent cover/door | No | ||
Material housing | Steel | ||
Height | mm | 1060 | |
Width | mm | 800 | |
Depth | mm | 262.5 | |
Built-in depth | mm | 0 | |
Internal depth | mm | 257.5 | |
DIN-rail | Yes | ||
With mounting plate | No | ||
Extension possible | Yes | ||
EMC-version | No | ||
Colour | Grey | ||
RAL-number | 7035 | ||
Degree of protection (IP) | IP30 | ||
With lock | No |
Dati tecnici per verifiche di progetto | |||
Dissipazione, a temperatura ambiente di 35°C, delta T 20 gradi, calcolata secondo IEC60890 | |||
Custodia singola per montaggio a parete | PV | W | 95 |
Custodia di testa per montaggio a parete | PV | W | 90 |
Custodia centrale per montaggio a parete | PV | W | 86 |
Dissipazione, a temperatura ambiente di 35°C, delta T 35 gradi, calcolata secondo IEC60890 | |||
Custodia singola per montaggio a parete | PV | W | 191 |
Custodia di testa per montaggio a parete | PV | W | 181 |
Custodia centrale per montaggio a parete | PV | W | 173 |
Verifiche di progetto IEC/EN 61439 | |||
10.2 Idoneità di materiali e componenti | |||
10.2.2 Resistenza alla corrosione | I requisiti della norma di prodotto sono soddisfatti. | ||
10.2.3.1 Resistenza dell'involucro al calore | I requisiti della norma di prodotto sono soddisfatti. | ||
10.2.3.2 Resistenza dei materiali isolanti a livelli di calore normale | I requisiti della norma di prodotto sono soddisfatti. | ||
10.2.3.3 Resistenza dei materiali isolanti a livelli di calore straordinari | I requisiti della norma di prodotto sono soddisfatti. | ||
10.2.4 Resistenza all'irradiazione UV | Non rilevante per installazione interna. | ||
10.2.5 Sollevamento | Non pertinente per custodia senza dispositivi di sollevamento. | ||
10.2.6 Prova d'urto | IK07 | ||
10.2.7 Diciture | I requisiti della norma di prodotto sono soddisfatti. | ||
10.3 Grado di protezione degli involucri | IP30 | ||
10.4 Vie di dispersione aerea e superficiale | Rientra nella responsabilità del costruttore del quadro elettrico. | ||
10.5 Protezione contro scosse elettriche | < 0,1 Ω, i requisiti della norma di prodotto sono soddisfatti. | ||
10.6 Montaggio incassato di apparecchi | Rientra nella responsabilità del costruttore del quadro elettrico. | ||
10.7 Circuiti interni e collegamenti | Rientra nella responsabilità del costruttore del quadro elettrico. | ||
10.8 Collegamenti per conduttori introdotti dall'esterno | Rientra nella responsabilità del costruttore del quadro elettrico. | ||
10.9 Caratteristiche d’isolamento | |||
10.9.2 Rigidità dielettrica a frequenza di rete | Ui= 440 V AC | ||
10.9.3 Tensione di tenuta a impulso | 4 kV | ||
10.9.4 Verifica di involucri in materiale isolante | Non pertinente per custodia in metallo. | ||
10.10 Riscaldamento | Il calcolo del surriscaldamento rientra nella responsabilità del costruttore del quadro elettrico. Eaton fornisce i dati relativi alla dissipazione delle apparecchiature. | ||
10.11 Resistenza al corto circuito | Rientra nella responsabilità del costruttore del quadro elettrico. | ||
10.12 EMC | Rientra nella responsabilità del costruttore del quadro elettrico. | ||
10.13 Funzione meccanica | I requisiti della norma di prodotto sono soddisfatti. |
Distribution boards (EG000023) / Small distribution board (EC000214) | |||
Mounting method | Surface mounting | ||
Number of rows | 7 | ||
Width in number of modular spacings | 35 | ||
Type of cover | Door | ||
Cover model | Closed | ||
Transparent cover/door | No | ||
Material housing | Steel | ||
Height | mm | 1060 | |
Width | mm | 800 | |
Depth | mm | 262.5 | |
Built-in depth | mm | 0 | |
Internal depth | mm | 257.5 | |
DIN-rail | Yes | ||
With mounting plate | No | ||
Extension possible | Yes | ||
EMC-version | No | ||
Colour | Grey | ||
RAL-number | 7035 | ||
Degree of protection (IP) | IP30 | ||
With lock | No |
Titolo: | Dimensione: | Tipo: |
---|---|---|
BP-O-800/10-FLAT 113174 113174_IT.pdf | 181 Kbytes |
Nessun commento per il momento.
Valutazione: | |
Nome: | |
Email: | |
Titolo: | |
Testo: | |
Mi consiglia questo prodotto da acquistare? | |
Inserisci recensione |
Tutti i feedback che riceviamo dagli elementi che offriamo sono reali e verificati. Un piccolo gesto, ma di grande valore. Quindi grazie per quel minuto si spende in noi lasciare il vostro parere e punteggio sui prodotti, perché ci aiuta a continuare a migliorare e di offrire ancora maggiore qualità del servizio.