Prodotto aggiunto al tuo carrello
AQ1042
CARLO GAVAZZI
1
Parametri selezionati Altro
Controls > Energy Management, Software and Accessories
* Prodotto nuovo nel suo imballaggio d'origine con tutte le garanzie e certificazioni de CARLO GAVAZZI
Grazie per il suo interesse nei nostri prodotti, speriamo che il tempo di consegna indicato sia conveniente per lei.
Durante l’elaborazione dell’ordine potrà selezionare il tipo di invio che meglio si adatti alle sue necessità: Aéreo Express 24Hrs, Terrestre Standard 48/72Hrs, etc.
Energy Management
Modular Universal Utility Meter and Power Analyzer
Type WM4-96
• Class 0.5 (current/voltage)
• Universal meter: energy, water and gas
• 32-bit µP-based multifunction power analyzer
• Back-lighted graph display (128x64 dots)
• Front size: 96x96 mm
• Measurement of single phase and system instantaneous variables: W, Wdmd, var, vardmd, VA, VAdmd, PF, PFavg, V, AL, An,
Hz, THD (for all measurements max and min values)
• Measured energies: kWh and kvarh on 4 quadrants
• Graphic display of the load profile (daily, weekly, monthly display)
• Current and voltage inputs with autoranging capability
• 4x4 dgt instantaneous variable read-out
• 4x9 dgt total energies read-out
• 4x6 dgt partial energies read-out
• Optional RS 422/485 serial output
• Optional RS232 + real time clock function and 2Mb data logging of alarms, MIN/MAX events and up to 8 variables with programmable time interval.
• MODBUS RTU, JBUS protocol
• Transmission and reception of SMS messages (vari- ables and alarm status)
• Data transmission and reception by means of analogue modem
• Up to 4 optional pulse outputs
• Up to 4 optional alarm outputs
• Universal power supply: 18-60VAC/VDC, 90-260 VAC/VDC
• Front degree protection: IP 65
Product Description
• 48 independent energy meters to be used as single, dual, multi-time energy management
• Interface with watt-hour meters by means of digital inputs (+kWh, +kvarh, -kWh, -kvarh)
• Interface with gas and water meters by means of digi- tal inputs (one water meter, two gas meters to be used as single or dual time management)
• Display refresh rate: 10 samples/s
• Harmonic distortion analys (FFT) up to the 50th harmonic with graphic and numeric indication (current and voltage)
• Harmonics source detection
How to order WM4-96 AV53H XX XX XX XX X
Universal utility meter and power analyzer which can be used in 3 different operating modes:
- direct measurements for the power quality analysis (LV or MV/HV connection)
- indirect energy and power measurements by means of watt-hour meters (LV or MV/HV connection)
- direct measurements for the
measurements for the ener- gy variables (LV or MV/HV). It’s possible to add the management of gas and water metering to all of these working modes. Automatic transmission of SMS alarm messages. Remote read-out from GSM mobile phones of all the instantaneous variables, the last variables available in the
Model Range code System
Power supply
Slot A Slot B Slot C Slot D Options
How to order Wm4Soft Network
instantaneous variables (LV
data logging and the energy Wm4Soft Remote
connection) and indirect
Type selection
meters.
Wm4Soft Network: programm to download memory data and to manage a modem. Wm4Soft Remote: programm to set all the programming parameters.
Range code (on request)
XXX: None
AV5: 240/415 VAC-
1/5 AAC
(max. 300 V (L-N)/
520 V (L-L) - 6 A)
AV7: 400/690VAC -
Slot A (interfacing)
XX: None
D2: 3 universal digital inputs
+ excitation output
(16-24VDC)
Slot B (communication)
XX: None
S1: Serial output, RS485 multidrop, bidirectional
Slot C (alarm or pulse)
XX: None
R1: Single relay output
(AC1-8AAC, 250VAC)
R2: Dual relay output, (AC1-8AAC, 250VAC)
O1: Single open collector
1/5 AAC
(max. 480V (L-N) /
830 V (L-L) / 6 A
Power supply
Slot D (alarm or pulse)
Options
O2: D1:
output (30V/100mADC) Dual open collector out- put (30V/100mADC)
3 digital inputs for volt- age-free contacts
L: 18 to 60VAC/VDC
H: 90 to 260VAC/VDC
XX: None
R2: Dual relay output, (AC1-8AAC, 250VAC)
O2: Dual open collector output (30V/100mADC)
O4: Four open collector out- put (30V/100mADC)
X: None
M: Serial port RS232+RTC+ 2Mb or Data memory to store all events and contin- uous record up to 8 variables
E1: WEB-server option
D2: 3 universal digital inputs
+ excitation output
(16-24VDC)
Specifications are subject to change without notice WM4-96 DS200706 1
Titolo: | Dimensione: | Tipo: |
---|---|---|
AQ1042 AQ1042 AQ1042_DATENBLATT_DE.pdf | 380 Kbytes | |
Scarica il catalogo generale |
Nessun commento per il momento.
Valutazione: | |
Nome: | |
Email: | |
Titolo: | |
Testo: | |
Mi consiglia questo prodotto da acquistare? | |
Inserisci recensione |
Tutti i feedback che riceviamo dagli elementi che offriamo sono reali e verificati. Un piccolo gesto, ma di grande valore. Quindi grazie per quel minuto si spende in noi lasciare il vostro parere e punteggio sui prodotti, perché ci aiuta a continuare a migliorare e di offrire ancora maggiore qualità del servizio.