Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
6AG1136-6DC00-2CA0 SIEMENS SIPLUS ET 200SP F-DQ 8x24VDC/0.5A PP HF -30...+60°C with conformal coating based ..
6AG1136-6DC00-2CA0
SIEMENS
SIPLUS ET 200SP F-DQ 8x24VDC/0.5A PP HF -30...+60°C with conformal coating based on 6ES7136-6DC00-0CA0 . 15 MM width, Cat.4, PL e (EN ISO 13849-1) up to SIL 3 (IEC 61508)
SIPLUS ET 200SP F-DQ 8 X 24 V DC/0.5 A PP HF -25...+60 °C with coating formed based on 6ES7136-6DC00-0CA0 . Width 15 mm, Cat. 4, PL e (en ISO 13849-1) up to SIL 3 (IEC 61508)
AUTOMATION SYSTEMS > SIPLUS Extreme (LOGO, S7-1200, S7-1500, etc)
Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS
Best sellers
▲More info
▲ETIM: EC001599 - Fieldbus, decentr. periphery - digital I/O module
| Value | Unit | |
|---|---|---|
| Type of digital output (EF003601) | - | |
| Explosion safety category for gas (EF003997) | - | |
| Supply voltage AC 60 Hz (EF007533) | - | V |
| Explosion safety category for dust (EF003998) | - | |
| Supply voltage AC 50 Hz (EF007532) | - | V |
| Category according to EN 954-1 (EF006782) | - | |
| Permitted voltage at output (EF007553) | - | V |
| Type of electric connection (EF003961) | - | |
| Supply voltage DC (EF007534) | ['20.4', '28.8'] | V |
| Voltage type of supply voltage (EF002991) | DC | |
| Number of digital inputs (EF001992) | 0 | |
| Number of digital outputs (EF001993) | 8 | |
| Digital inputs configurable (EF008516) | - | |
| Digital outputs configurable (EF008520) | true | |
| Input current at signal 1 (EF001428) | - | mA |
| Permitted voltage at input (EF007554) | ['-', '-'] | V |
| Type of voltage (input voltage) (EF003033) | - | |
| Output current (EF003202) | 0.5 | A |
| Type of output voltage (EF008222) | DC | |
| Short-circuit protection, outputs available (EF003203) | true | |
| Number of HW-interfaces industrial Ethernet (EF003020) | 0 | |
| Number of interfaces PROFINET (EF006932) | - | |
| Number of HW-interfaces RS-232 (EF003021) | 0 | |
| Number of HW-interfaces RS-422 (EF003022) | 0 | |
| Number of HW-interfaces RS-485 (EF003023) | - | |
| Number of HW-interfaces serial TTY (EF003024) | 0 | |
| Number of HW-interfaces parallel (EF003026) | 0 | |
| Number of HW-interfaces Wireless (EF006933) | 0 | |
| Number of HW-interfaces USB (EF003025) | 0 | |
| Number of HW-interfaces other (EF003027) | 0 | |
| With optical interface (EF003028) | false | |
| Supporting protocol for TCP/IP (EF003050) | false | |
| Supporting protocol for PROFIBUS (EF003052) | - | |
| Supporting protocol for CAN (EF003053) | false | |
| Supporting protocol for INTERBUS (EF003054) | false | |
| Supporting protocol for ASI (EF003051) | false | |
| Supporting protocol for KNX (EF003055) | false | |
| Supporting protocol for Modbus (EF003057) | false | |
| Supporting protocol for Data-Highway (EF003058) | false | |
| Supporting protocol for DeviceNet (EF003059) | false | |
| Supporting protocol for SUCONET (EF003060) | false | |
| Supporting protocol for LON (EF003017) | false | |
| Supporting protocol for PROFINET IO (EF007525) | - | |
| Supporting protocol for PROFINET CBA (EF007524) | false | |
| Supporting protocol for SERCOS (EF006657) | false | |
| Supporting protocol for Foundation Fieldbus (EF007522) | false | |
| Supporting protocol for EtherNet/IP (EF007521) | false | |
| Supporting protocol for AS-Interface Safety at Work (EF007519) | false | |
| Supporting protocol for DeviceNet Safety (EF007520) | false | |
| Supporting protocol for INTERBUS-Safety (EF006662) | false | |
| Supporting protocol for PROFIsafe (EF007526) | true | |
| Supporting protocol for SafetyBUS p (EF007527) | false | |
| Supporting protocol for other bus systems (EF003062) | false | |
| Radio standard Bluetooth (EF007178) | false | |
| Radio standard WLAN 802.11 (EF007179) | false | |
| Radio standard GPRS (EF008523) | false | |
| Radio standard GSM (EF008524) | false | |
| Radio standard UMTS (EF008525) | false | |
| IO link master (EF007298) | false | |
| System accessory (EF004118) | true | |
| Degree of protection (IP) (EF005474) | IP20 | |
| Fieldbus connection over separate bus coupler possible (EF004002) | true | |
| Rail mounting possible (EF003972) | true | |
| Wall mounting/direct mounting (EF007020) | false | |
| Front build in possible (EF007016) | false | |
| Rack-assembly possible (EF007018) | true | |
| Suitable for safety functions (EF001597) | true | |
| SIL according to IEC 61508 (EF009889) | 3 | |
| Performance level according to EN ISO 13849-1 (EF007399) | Level e | |
| Appendant operation agent (Ex ia) (EF004141) | - | |
| Appendant operation agent (Ex ib) (EF004142) | - | |
| Width (EF000008) | 15.0 | mm |
| Height (EF000040) | 73.0 | mm |
| Depth (EF000049) | 58.0 | mm |
| Time delay at signal exchange (EF002382) | - | ms |
| SIPLUS ET 200SP F-DQ 8x24VDC/0.5A PP HF -30...+60°C with conformal coating based on 6ES7136-6DC00-0CA0 . 15 MM width, Cat.4, PL e (EN ISO 13849-1) up to SIL 3 (IEC 61508) | ||
| General information | ||
| Product type designation | F-DQ 8x24VDC/0.5A PP HF | |
| Firmware version | ||
| ● FW update possible | Yes | |
| usable BaseUnits | BU type A0 | |
| Color code for module-specific color identification plate | CC02 | |
| Product function | ||
| ● I&M data | Yes; I&M0 to I&M3 | |
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Reverse polarity protection | Yes | |
| Input current | ||
| Current consumption (rated value) | 75 mA; without load | |
| Current consumption, max. | 21 mA; From the backplane bus | |
| Output voltage | ||
| Rated value (DC) | 24 V | |
| Power | ||
| Power available from the backplane bus | 70 mW | |
| Power loss | ||
| Power loss, typ. | 3 W | |
| Address area | ||
| Address space per module | ||
| ● Inputs | 6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA | |
| ● Outputs | 6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA | |
| Hardware configuration | ||
| Automatic encoding | ||
| ● Electronic coding element type F | Yes | |
| Digital outputs | ||
| Number of digital outputs | 8 | |
| Digital outputs, parameterizable | Yes | |
| Short-circuit protection | Yes | |
| ● Response threshold, typ. | Min. 0.7 A | |
| Open-circuit detection | No | |
| Limitation of inductive shutdown voltage to | Typ. -39 V | |
| Controlling a digital input | Yes | |
| Switching capacity of the outputs | ||
| ● with resistive load, max. | 0.5 A | |
| ● on lamp load, max. | 2 W | |
| Load resistance range | ||
| ● lower limit | 48 Ω | |
| ● upper limit | 12 000 Ω | |
| Output voltage | ||
| ● for signal "1", min. | 24 V; L+ (-0.5 V) | |
| Output current | ||
| ● for signal "1" rated value | 0.5 A | |
| ● for signal "0" residual current, max. | 0.5 mA | |
| Switching frequency | ||
| ● with resistive load, max. | 30 Hz; Symmetrical | |
| ● with inductive load, max. | 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical | |
| ● with capacitive load, max. | 2 Hz; Symmetrical | |
| ● on lamp load, max. | 10 Hz; Symmetrical | |
| Total current of the outputs | ||
| ● Current per channel, max. | 0.5 A; note derating data in the manual | |
| ● Current per module, max. | 3 A; note derating data in the manual | |
| Total current of the outputs (per module) | ||
| horizontal installation | ||
| — up to 40 °C, max. | 3 A | |
| — up to 50 °C, max. | 2.5 A | |
| — up to 60 °C, max. | 2 A | |
| vertical installation | ||
| — up to 50 °C, max. | 2 A | |
| Cable length | ||
| ● shielded, max. | 100 m | |
| ● unshielded, max. | 100 m | |
| Interrupts/diagnostics/status information | ||
| Diagnostics function | Yes | |
| Substitute values connectable | No | |
| Alarms | ||
| ● Diagnostic alarm | Yes | |
| Diagnostics indication LED | ||
| ● RUN LED | Yes; green LED | |
| ● ERROR LED | Yes; red LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED | |
| ● Channel status display | Yes; green LED | |
| ● for channel diagnostics | Yes; red LED | |
| ● for module diagnostics | Yes; green/red DIAG LED | |
| Potential separation | ||
| Potential separation channels | ||
| ● between the channels | No | |
| ● between the channels and backplane bus | Yes | |
| ● between the channels and the power supply of the electronics | No | |
| Isolation | ||
| Isolation tested with | 707 V DC (type test) | |
| Standards, approvals, certificates | ||
| Suitable for safety functions | Yes | |
| Highest safety class achievable in safety mode | ||
| ● Performance level according to ISO 13849-1 | PLe | |
| ● Category according to ISO 13849-1 | Cat. 4 | |
| ● SIL acc. to IEC 61508 | SIL 3 | |
| Probability of failure (for service life of 20 years and repair time of 100 hours) | ||
| — Low demand mode: PFDavg in accordance with SIL3 | < 6.00E-05 | |
| — High demand/continuous mode: PFH in accordance with SIL3 | < 2.00E-09 1/h | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● horizontal installation, min. | -30 °C; = Tmin (incl. condensation/frost) | |
| ● horizontal installation, max. | 60 °C; = Tmax; +70 °C with configured empty slots to the left and right of the module | |
| ● vertical installation, min. | -30 °C; = Tmin | |
| ● vertical installation, max. | 50 °C; = Tmax | |
| Altitude during operation relating to sea level | ||
| ● Installation altitude above sea level, max. | 4 000 m | |
| ● Ambient air temperature-barometric pressure-altitude | Restrictions for installation altitudes > 2 000 m, see entry ID: 109771992 | |
| Relative humidity | ||
| ● With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation | |
| Resistance | ||
| Coolants and lubricants | ||
| — Resistant to commercially available coolants and lubricants | Yes; Incl. diesel and oil droplets in the air | |
| Use in stationary industrial systems | ||
| — to biologically active substances according to EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request | |
| — to chemically active substances according to EN 60721-3-3 | Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * | |
| — to mechanically active substances according to EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust, * | |
| — Against mechanical environmental conditions acc. to EN 60721-3-3 | Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) | |
| Use on land craft, rail vehicles and special-purpose vehicles | ||
| — Against mechanical environmental conditions acc. to EN 60721-3-5 | Yes; Class 5M2 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) | |
| — against mechanical environmental conditions in agriculture acc. to ISO 15003 | Yes | |
| Use on ships/at sea | ||
| — to biologically active substances according to EN 60721-3-6 | Yes; Class 6B2 mold, fungal and dry rot spores (excluding fauna) | |
| — to chemically active substances according to EN 60721-3-6 | Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * | |
| — to mechanically active substances according to EN 60721-3-6 | Yes; Class 6S3 incl. sand, dust; * | |
| — Against mechanical environmental conditions acc. to EN 60721-3-6 | Yes; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) | |
| Usage in industrial process technology | ||
| — Against chemically active substances acc. to EN 60654-4 | Yes; Class 3 (excluding trichlorethylene) | |
| — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 | Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) | |
| Remark | ||
| — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 | * The supplied plug covers must remain in place over the unused interfaces during operation! | |
| Conformal coating | ||
| ● Coatings for printed circuit board assemblies acc. to EN 61086 | Yes; Class 2 for high reliability | |
| ● Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection | |
| ● Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life | |
| ● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A | Yes; Conformal coating, Class A | |
| Dimensions | ||
| Width | 15 mm | |
| Height | 73 mm | |
| Depth | 58 mm | |
| Weights | ||
| Weight, approx. | 48 g | |
| last modified: | 08/29/2020 | |
| Product | ||||||||||||||||||||||||||||||||||
| Article Number (Market Facing Number) | 6AG1136-6DC00-2CA0 | |||||||||||||||||||||||||||||||||
| Product Description | SIPLUS ET 200SP F-DQ 8x24VDC/0.5A PP HF -30...+60°C with conformal coating based on 6ES7136-6DC00-0CA0 . 15 MM width, Cat.4, PL e (EN ISO 13849-1) up to SIL 3 (IEC 61508) | |||||||||||||||||||||||||||||||||
| Product family | SIPLUS digital F-output modules | |||||||||||||||||||||||||||||||||
| Product Lifecycle (PLM) | PM300:Active Product | |||||||||||||||||||||||||||||||||
| Price data | ||||||||||||||||||||||||||||||||||
| Price Group | 473 | |||||||||||||||||||||||||||||||||
| Surcharge for Raw Materials | None | |||||||||||||||||||||||||||||||||
| Metal Factor | None | |||||||||||||||||||||||||||||||||
| Delivery information | ||||||||||||||||||||||||||||||||||
| Export Control Regulations | AL : N / ECCN : EAR99H | |||||||||||||||||||||||||||||||||
| Standard lead time ex-works | 37 Day/Days | |||||||||||||||||||||||||||||||||
| Net Weight (kg) | 0,068 Kg | |||||||||||||||||||||||||||||||||
| Product Dimensions (W x L x H) | Not available | |||||||||||||||||||||||||||||||||
| Packaging Dimension | 6,50 x 8,80 x 3,80 | |||||||||||||||||||||||||||||||||
| Package size unit of measure | CM | |||||||||||||||||||||||||||||||||
| Quantity Unit | 1 Piece | |||||||||||||||||||||||||||||||||
| Packaging Quantity | 1 | |||||||||||||||||||||||||||||||||
| Additional Product Information | ||||||||||||||||||||||||||||||||||
| EAN | 4047618085803 | |||||||||||||||||||||||||||||||||
| UPC | 804766713620 | |||||||||||||||||||||||||||||||||
| Commodity Code | 85389091 | |||||||||||||||||||||||||||||||||
| LKZ_FDB/ CatalogID | A&DSE/SIP ADD | |||||||||||||||||||||||||||||||||
| Product Group | 4257 | |||||||||||||||||||||||||||||||||
| Group Code | R740 | |||||||||||||||||||||||||||||||||
| Country of origin | Germany | |||||||||||||||||||||||||||||||||
| Compliance with the substance restrictions according to RoHS directive | Since: 25.07.2017 | |||||||||||||||||||||||||||||||||
| Product class | B: return restricted, please contact your Siemens partner/contact | |||||||||||||||||||||||||||||||||
| WEEE (2012/19/EU) Take-Back Obligation | Yes | |||||||||||||||||||||||||||||||||
| REACH Art. 33 Duty to inform according to the current list of candidates |
| |||||||||||||||||||||||||||||||||
| Classifications | ||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOGUE SIEMENS EN.pdf | 120 Mbytes |
|
| PDF CATALOGUE SIEMENS EN.pdf | 104 Mbytes |
|
| 6AG1136-6DC00-2CA0 EN_6AG1136-6DC00-2CA0.pdf | 139 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.