Product successfully added to your shopping cart
6AG1131-6FD01-7BB1
SIEMENS
1
SIPLUS ET 200SP, Digital input module, DI 4x 120..230V AC ST, type 3 (IEC 61131) -40...+70°C with conformal coating based on 6ES7131-6FD01-0BB1 . Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module diagnostics
SIPLUS ET 200SP, module of digital inputs, DI 4 × 120...230 V AC ST, type 3 (IEC 61131) -40...+70 °C with coating formed based on 6ES7131-6FD01-0BB1 . Packing unit: 1 pc., suitable for BU B1, color code CC41, diagnostic module
AUTOMATION SYSTEMS > SIPLUS Extreme (LOGO, S7-1200, S7-1500, etc)
Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
| Value | Unit | |
|---|---|---|
| Performance level according to EN ISO 13849-1 (EF007399) | - | |
| Supply voltage AC 60 Hz (EF007533) | - | V |
| Type of voltage (input voltage) (EF003033) | - | |
| Type of electric connection (EF003961) | - | |
| Degree of protection (IP) (EF005474) | - | |
| SIL according to IEC 61508 (EF009889) | - | |
| Explosion safety category for gas (EF003997) | - | |
| Category according to EN 954-1 (EF006782) | - | |
| Supply voltage AC 50 Hz (EF007532) | - | V |
| Explosion safety category for dust (EF003998) | - | |
| Voltage type of supply voltage (EF002991) | AC | |
| Number of digital inputs (EF001992) | 4 | |
| Number of digital outputs (EF001993) | 0 | |
| Digital inputs configurable (EF008516) | true | |
| Digital outputs configurable (EF008520) | - | |
| Input current at signal 1 (EF001428) | 10.8 | mA |
| Permitted voltage at input (EF007554) | ['0.0', '264.0'] | V |
| Type of digital output (EF003601) | None | |
| Output current (EF003202) | - | A |
| Permitted voltage at output (EF007553) | ['-', '-'] | V |
| Type of output voltage (EF008222) | - | |
| Short-circuit protection, outputs available (EF003203) | - | |
| Number of HW-interfaces industrial Ethernet (EF003020) | 0 | |
| Number of interfaces PROFINET (EF006932) | 0 | |
| Number of HW-interfaces RS-232 (EF003021) | 0 | |
| Number of HW-interfaces RS-422 (EF003022) | 0 | |
| Number of HW-interfaces RS-485 (EF003023) | 0 | |
| Number of HW-interfaces serial TTY (EF003024) | 0 | |
| Number of HW-interfaces parallel (EF003026) | 0 | |
| Number of HW-interfaces Wireless (EF006933) | 0 | |
| Number of HW-interfaces USB (EF003025) | 0 | |
| Number of HW-interfaces other (EF003027) | 0 | |
| With optical interface (EF003028) | false | |
| Supporting protocol for TCP/IP (EF003050) | false | |
| Supporting protocol for PROFIBUS (EF003052) | false | |
| Supporting protocol for CAN (EF003053) | false | |
| Supporting protocol for INTERBUS (EF003054) | false | |
| Supporting protocol for ASI (EF003051) | false | |
| Supporting protocol for KNX (EF003055) | false | |
| Supporting protocol for Modbus (EF003057) | false | |
| Supporting protocol for Data-Highway (EF003058) | false | |
| Supporting protocol for DeviceNet (EF003059) | false | |
| Supporting protocol for SUCONET (EF003060) | false | |
| Supporting protocol for LON (EF003017) | false | |
| Supporting protocol for PROFINET IO (EF007525) | false | |
| Supporting protocol for PROFINET CBA (EF007524) | false | |
| Supporting protocol for SERCOS (EF006657) | false | |
| Supporting protocol for Foundation Fieldbus (EF007522) | false | |
| Supporting protocol for EtherNet/IP (EF007521) | false | |
| Supporting protocol for AS-Interface Safety at Work (EF007519) | false | |
| Supporting protocol for DeviceNet Safety (EF007520) | false | |
| Supporting protocol for INTERBUS-Safety (EF006662) | false | |
| Supporting protocol for PROFIsafe (EF007526) | false | |
| Supporting protocol for SafetyBUS p (EF007527) | false | |
| Supporting protocol for other bus systems (EF003062) | false | |
| Radio standard Bluetooth (EF007178) | false | |
| Radio standard WLAN 802.11 (EF007179) | false | |
| Radio standard GPRS (EF008523) | false | |
| Radio standard GSM (EF008524) | false | |
| Radio standard UMTS (EF008525) | false | |
| IO link master (EF007298) | false | |
| System accessory (EF004118) | true | |
| Time delay at signal exchange (EF002382) | ['1.5', '8.0'] | ms |
| Fieldbus connection over separate bus coupler possible (EF004002) | true | |
| Rail mounting possible (EF003972) | true | |
| Wall mounting/direct mounting (EF007020) | false | |
| Front build in possible (EF007016) | true | |
| Rack-assembly possible (EF007018) | true | |
| Suitable for safety functions (EF001597) | false | |
| Appendant operation agent (Ex ia) (EF004141) | - | |
| Appendant operation agent (Ex ib) (EF004142) | - | |
| Width (EF000008) | 20.0 | mm |
| Height (EF000040) | 73.0 | mm |
| Depth (EF000049) | 58.0 | mm |
| Supply voltage DC (EF007534) | - | V |
| SIPLUS ET 200SP, Digital input module, DI 4x 120..230V AC ST, type 3 (IEC 61131) -40...+70°C with conformal coating based on 6ES7131-6FD01-0BB1 . Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module diagnostics | ||
| General information | ||
| Product type designation | DI 4x120 ... 230 V AC ST | |
| Firmware version | ||
| ● FW update possible | No | |
| usable BaseUnits | BU type B1 | |
| Color code for module-specific color identification plate | CC41 | |
| Product function | ||
| ● I&M data | Yes; I&M0 to I&M3 | |
| ● Isochronous mode | No | |
| Operating mode | ||
| ● DI | Yes | |
| ● Counter | No | |
| ● Oversampling | No | |
| ● MSI | No | |
| Supply voltage | ||
| Rated value (AC) | 230 V | |
| Reverse polarity protection | No | |
| Input current | ||
| Current consumption (rated value) | 10 mA | |
| Encoder supply | ||
| Number of outputs | 4 | |
| Short-circuit protection | No; when using BU type B1, a fuse with 10 A tripping current must be provided | |
| Output current | ||
| ● up to 60 °C, max. | 10 A | |
| Power loss | ||
| Power loss, typ. | 1 W; Active power, load voltage 230 V, all inputs connected with 230 V, 50 Hz | |
| Address area | ||
| Address space per module | ||
| ● Inputs | 1 byte; + 1 byte for QI information | |
| Hardware configuration | ||
| Automatic encoding | Yes | |
| ● Mechanical coding element | Yes | |
| Selection of BaseUnit for connection variants | ||
| ● 1-wire connection | BU type B1 | |
| ● 2-wire connection | BU type B1 | |
| ● 3-wire connection | BU type B1 | |
| ● 4-wire connection | BU type B1 + potential distributor module | |
| Digital inputs | ||
| Number of digital inputs | 4 | |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes | |
| Input voltage | ||
| ● Rated value (AC) | 230 V | |
| ● for signal "0" | 0V AC to 40V AC | |
| ● for signal "1" | 74 V AC to 264 V AC | |
| Input current | ||
| ● for signal "1", typ. | 10.8 mA | |
| Input delay (for rated value of input voltage) | ||
| for standard inputs | ||
| — parameterizable | No | |
| — at "0" to "1", min. | 1.5 ms | |
| — at "0" to "1", max. | 4 ms | |
| — at "1" to "0", min. | 10 ms | |
| — at "1" to "0", max. | 10 ms | |
| Cable length | ||
| ● shielded, max. | 1 000 m | |
| ● unshielded, max. | 600 m | |
| Encoder | ||
| Connectable encoders | ||
| ● 2-wire sensor | Yes | |
| Interrupts/diagnostics/status information | ||
| Alarms | ||
| ● Diagnostic alarm | No | |
| ● Hardware interrupt | No | |
| Diagnoses | ||
| ● Monitoring the supply voltage | No | |
| ● Wire-break | No | |
| ● Short-circuit | No | |
| Diagnostics indication LED | ||
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED | |
| ● Channel status display | Yes; green LED | |
| ● for channel diagnostics | No | |
| ● for module diagnostics | Yes; green/red DIAG LED | |
| Potential separation | ||
| Potential separation channels | ||
| ● between the channels | No | |
| ● between the channels and backplane bus | Yes | |
| ● between the channels and the power supply of the electronics | No | |
| Isolation | ||
| Isolation tested with | 2 545 V DC/2 s (routine test) | |
| Standards, approvals, certificates | ||
| Suitable for safety functions | No | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● horizontal installation, min. | -40 °C; = Tmin (incl. condensation/frost) | |
| ● horizontal installation, max. | 70 °C; = Tmax | |
| Altitude during operation relating to sea level | ||
| ● Installation altitude above sea level, max. | 2 000 m | |
| ● Ambient air temperature-barometric pressure-altitude | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) | |
| Relative humidity | ||
| ● With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; incl. condensation / frost permitted (no commissioning under condensation conditions) | |
| Resistance | ||
| Coolants and lubricants | ||
| — Resistant to commercially available coolants and lubricants | Yes; Incl. diesel and oil droplets in the air | |
| Use in stationary industrial systems | ||
| — to biologically active substances according to EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request | |
| — to chemically active substances according to EN 60721-3-3 | Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * | |
| — to mechanically active substances according to EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust, * | |
| — Against mechanical environmental conditions acc. to EN 60721-3-3 | Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) | |
| Use on ships/at sea | ||
| — to biologically active substances according to EN 60721-3-6 | Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request | |
| — to chemically active substances according to EN 60721-3-6 | Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * | |
| — to mechanically active substances according to EN 60721-3-6 | Yes; Class 6S3 incl. sand, dust; * | |
| — Against mechanical environmental conditions acc. to EN 60721-3-6 | Yes; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) | |
| Usage in industrial process technology | ||
| — Against chemically active substances acc. to EN 60654-4 | Yes; Class 3 (excluding trichlorethylene) | |
| — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 | Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) | |
| Remark | ||
| — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 | * The supplied plug covers must remain in place over the unused interfaces during operation! | |
| Conformal coating | ||
| ● Coatings for printed circuit board assemblies acc. to EN 61086 | Yes; Class 2 for high reliability | |
| ● Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection | |
| ● Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life | |
| ● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A | Yes; Conformal coating, Class A | |
| Dimensions | ||
| Width | 20 mm | |
| Height | 73 mm | |
| Depth | 58 mm | |
| Weights | ||
| Weight, approx. | 36 g | |
| last modified: | 08/29/2020 | |
| Product | ||||||||||||||||||||||||||||||||||
| Article Number (Market Facing Number) | 6AG1131-6FD01-7BB1 | |||||||||||||||||||||||||||||||||
| Product Description | SIPLUS ET 200SP, Digital input module, DI 4x 120..230V AC ST, type 3 (IEC 61131) -40...+70°C with conformal coating based on 6ES7131-6FD01-0BB1 . Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module diagnostics | |||||||||||||||||||||||||||||||||
| Product family | SIPLUS digital inputs | |||||||||||||||||||||||||||||||||
| Product Lifecycle (PLM) | PM300:Active Product | |||||||||||||||||||||||||||||||||
| Price data | ||||||||||||||||||||||||||||||||||
| Price Group | 473 | |||||||||||||||||||||||||||||||||
| Surcharge for Raw Materials | None | |||||||||||||||||||||||||||||||||
| Metal Factor | None | |||||||||||||||||||||||||||||||||
| Delivery information | ||||||||||||||||||||||||||||||||||
| Export Control Regulations | AL : N / ECCN : EAR99H | |||||||||||||||||||||||||||||||||
| Standard lead time ex-works | 37 Day/Days | |||||||||||||||||||||||||||||||||
| Net Weight (kg) | 0,046 Kg | |||||||||||||||||||||||||||||||||
| Product Dimensions (W x L x H) | Not available | |||||||||||||||||||||||||||||||||
| Packaging Dimension | 6,50 x 7,70 x 2,30 | |||||||||||||||||||||||||||||||||
| Package size unit of measure | CM | |||||||||||||||||||||||||||||||||
| Quantity Unit | 1 Piece | |||||||||||||||||||||||||||||||||
| Packaging Quantity | 1 | |||||||||||||||||||||||||||||||||
| Additional Product Information | ||||||||||||||||||||||||||||||||||
| EAN | 4047618090029 | |||||||||||||||||||||||||||||||||
| UPC | 195125030497 | |||||||||||||||||||||||||||||||||
| Commodity Code | 85389091 | |||||||||||||||||||||||||||||||||
| LKZ_FDB/ CatalogID | A&DSE/SIP ADD | |||||||||||||||||||||||||||||||||
| Product Group | 4257 | |||||||||||||||||||||||||||||||||
| Group Code | R740 | |||||||||||||||||||||||||||||||||
| Country of origin | Germany | |||||||||||||||||||||||||||||||||
| Compliance with the substance restrictions according to RoHS directive | Since: 31.03.2014 | |||||||||||||||||||||||||||||||||
| Product class | B: return restricted, please contact your Siemens partner/contact | |||||||||||||||||||||||||||||||||
| WEEE (2012/19/EU) Take-Back Obligation | Yes | |||||||||||||||||||||||||||||||||
| REACH Art. 33 Duty to inform according to the current list of candidates |
| |||||||||||||||||||||||||||||||||
| Classifications | ||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||
| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOGUE SIEMENS EN.pdf | 120 Mbytes |
|
| PDF CATALOGUE SIEMENS EN.pdf | 104 Mbytes |
|
| 6AG1131-6FD01-7BB1 EN_6AG1131-6FD01-7BB1.pdf | 131 Kbytes |
![]() |
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.