3VA6560-7KQ32-2AA0 SIEMENS Circuit breaker 3VA6 UL Frame 800 breaking capacity class C 100kA @ 480 V 3-pole,.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

3VA6560-7KQ32-2AA0 SIEMENS Circuit breaker 3VA6 UL Frame 800 breaking capacity class C 100kA @ 480 V 3-pole,..

3VA6560-7KQ32-2AA0

SIEMENS

Circuit breaker 3VA6 UL Frame 800 breaking capacity class C 100kA @ 480 V 3-pole, Line protection ETU860, LSIG, In=600A overload protection, 100% rated Ir=240A ...600A Short-circuit protection Isd=0.6..12x In, Ii=1.5..12x In N conductor protection optionally with external CT up to 160% Ground-fault protection Ig=0.2... 1 x In, tg=0.05-0.8s

circuit breaker 3VA6 UL frame 800 breaking capacity class C 100kA @ 480 V 3-pole, line protection ETU860, LSIG, In=600A overload protection Ir=240A ... 600A short circuit protection. Manufactured to order. Non-Cancelable Non-Returnable.

More details


POWER DISTRIBUTION AND LOW VOLTAGE SWITCHGEAR > Moulded Case Circuit Breakers 3VA SENTRON

Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Technical data

Circuit breaker 3VA6 UL Frame 800 breaking capacity class C 100kA @ 480 V 3-pole, Line protection ETU860, LSIG, In=600A overload protection, 100% rated Ir=240A ...600A Short-circuit protection Isd=0.6..12x In, Ii=1.5..12x In N conductor protection optionally with external CT up to 160% Ground-fault protection Ig=0.2... 1 x In, tg=0.05-0.8s
Model
product brand nameSENTRON
product designationMolded-case circuit breaker
product designation / according to UL fileCMAE
design of the productSystem protection
design of the load switch / according to UL 489 / Heating, Air Conditioning, and Refrigeration circuit breaker (HACR Type)Yes
design of the overcurrent releaseETU860
protection function of the overcurrent releaseLSIG
number of poles3
General technical data
insulation voltage / rated value800 V
operating voltage / at AC / rated value690 V
power loss [W] / maximum151 W
power loss [W] / for rated value of the current / at AC / in hot operating state / per pole50.33 W
mechanical service life (operating cycles) / typical10 000
electrical endurance (operating cycles) / at AC-1 / at 380/415 V5 100
electrical endurance (operating cycles) / at AC-1 / at 690 V3 500
electrical endurance (operating cycles) / at 480 V5 100
electrical endurance (operating cycles) / at 600 V3 500
product feature / for neutral conductors / upgradable/retrofittable / short-circuit and overload proofYes
ground-fault monitoring versionSummation current formation L-conductor
product function
● communication functionYes
● other measurement functionYes
Net Weight12.76 kg
Current
marking / according to UL 489 / 100%-rated breakerYes
operational current
● at 40 °C600 A
● at 45 °C600 A
● at 50 °C600 A
● at 55 °C600 A
● at 60 °C600 A
● at 65 °C555 A
● at 70 °C510 A
Switching capacity according to IEC 60947
switching capacity class of the circuit breakerC
maximum short-circuit current breaking capacity (Icu)
● at 240 V200 kA
● at 415 V110 kA
● at 690 V35 kA
operating short-circuit current breaking capacity (Ics)
● at 240 V150 kA
● at 415 V85 kA
● at 690 V19 kA
short-circuit current making capacity (Icm)
● at 240 V440 kA
● at 415 V242 kA
● at 690 V74 kA
Switching capacity according to UL 489
current breaking capacity
● at 240 V200 kA
● at 480 V100 kA
● at 600 V50 kA
Adjustable parameters
adjustable response value setting current (Ir) / of the L-trip / with I2t characteristic
● minimum240 A
● maximum600 A
adjustable response value delay time (tr) / for L-tripping / with I2t characteristic
● minimum0.5 s
● maximum25 s
adjustable response value setting current (Isd) / of S-trip / with I0t characteristic
● minimum360 A
● maximum7 200 A
adjustable response value setting current (Isd) / of S-trip / with I2t characteristic
● minimum360 A
● maximum7 200 A
adjustable response value delay time (tsd) / for S-tripping / with I0t characteristic
● minimum0.05 s
● maximum0.5 s
adjustable response value delay time (tsd) / for S-tripping / with I2t characteristic
● minimum0.05 s
● maximum0.5 s
adjustable response value setting current (Ii) / for I-tripping
● minimum900 A
● maximum7 200 A
adjustable current response value current / for G-tripping / with standard characteristic
● initial value120 A
● full-scale value600 A
adjustable response value delay time (tg) / for G-tripping / with I0t characteristic
● minimum0.05 s
● maximum0.8 s
adjustable response value setting current (Ig) / for G-tripping / with I2t characteristic
● minimum120 A
● maximum600 A
adjustable response value delay time (tg) / for G-tripping / with I2t characteristic
● minimum0.05 s
● maximum0.8 s
adjustable setting current (InN) / for N-tripping
● minimum0 A
● maximum0 A
adjustable delay time / of S-trip / with I2t characteristic0.5 s
adjustable current response value current / of instantaneous short-circuit trip unit
● minimum900 A
● maximum7 200 A
design of the N-conductor protectionadjustable OFF; 20% to 160%
product function / grounding protectionYes
total break time / for G-tripping / with standard characteristic
● initial value0.05 s
● full-scale value0.8 s
Mechanical Design
product component
● undervoltage releaseNo
● voltage triggerNo
● trip indicatorNo
height [in]12.91 in
height328 mm
width [in]8.27 in
width210 mm
depth [in]4.72 in
depth120 mm
Connections
arrangement of electrical connectors / for main current circuitFront connection
type of electrical connection / for main current circuitnut keeper kit on both ends
type of connectable conductor cross-sections / for flat-bar terminal connection / minimum20 x 4 mm
type of connectable conductor cross-sections / for flat-bar terminal connection / maximum50 x 28 mm
Auxiliary circuit
number of CO contacts / for auxiliary contacts0
Accessories
product extension / optional / motor driveNo
Environmental conditions
protection class IP / on the frontIP40
ambient temperature
● during operation / minimum-25 °C
● during operation / maximum70 °C
● during storage / minimum-40 °C
● during storage / maximum80 °C
Certificates
reference code / according to IEC 81346-2Q
certificate of suitability / as approval for NAVAL (no combat vessels) / supplement SBYes

Downloads and manuals

General Product Approval

Confirmation

CCC

UL

Miscellaneous

Miscellaneous

EAC

EMCDeclaration of ConformityTest CertificatesMarine / Shipping

RCM

UK Declaration of Conformity

EC/EU-Declaration of Conformity

Type Test Certificates/Test Report

ABS (American Bureau of Shipping)

DNV / Det Norske Veritas

otherDangerous Good

Confirmation

Miscellaneous

Miscellaneous

Transport Information

Further information
Siemens has decided to exit the Russian market (see here).
Siemens is working on the renewal of the current EAC certificates.
Please contact your local Siemens office on the status of validity of the EAC certification if you intend to import or offer to supply these products to an EAC relevant market (other than the sanctioned EAEU member states Russia or Belarus).
Information on the packaging
Information- and Downloadcenter (Catalogs, Brochures,…)
Industry Mall (Online ordering system)
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
CAx-Online-Generator
Tender specifications
last modified:8/14/2023
Date
8/25/2023
Subject to change without notice
© Copyright Siemens 2023


Additional data

Product
Article Number (Market Facing Number)3VA6560-7KQ32-2AA0
Product DescriptionCircuit breaker 3VA6 UL Frame 800 breaking capacity class C 100kA @ 480 V 3-pole, Line protection ETU860, LSIG, In=600A overload protection, 100% rated Ir=240A ...600A Short-circuit protection Isd=0.6..12x In, Ii=1.5..12x In N conductor protection optionally with external CT up to 160% Ground-fault protection Ig=0.2... 1 x In, tg=0.05-0.8s
Product family3VA Molded Case Circuit Breakers up to 2000 A, UL / IEC
Product Lifecycle (PLM)PM300:Active Product
Price data
Region Specific PriceGroup / Headquarter Price Group12P / 1CB
Surcharge for Raw MaterialsNone
Metal FactorLPB-----
Delivery information
Export Control RegulationsAL : N / ECCN : EAR99
Standard lead time ex-works25 Day/Days
Net Weight (kg)12,760 Kg
Packaging Dimension250,00 x 360,00 x 180,00
Package size unit of measureMM
Quantity Unit1 Piece
Packaging Quantity1
Additional Product Information
EAN4042949437697
UPC804766981197
Commodity Code85362090
LKZ_FDB/ CatalogIDLV10
Product Group5383
Group CodeP360
Country of originMexico
Compliance with the substance restrictions according to RoHS directiveSince: 09.07.2019
Product classC: products manufactured / produced to order, which cannot be reused or re-utilised or be returned against credit.
WEEE (2012/19/EU) Take-Back ObligationYes
REACH Art. 33 Duty to inform according to the current list of candidates

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

Lead

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

Lead monoxide (lead oxide)

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

Silicic acid, lead salt

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

Perfluorobutane sulfonic acid (PFBS) and its salts

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Classifications
VersionClassification
eClass1227-37-04-09
eClass627-37-04-09
eClass7.127-37-04-09
eClass827-37-04-09
eClass927-37-04-09
eClass9.127-37-04-09
ETIM7EC000228
ETIM8EC000228
IDEA44850
UNSPSC1539-12-16-01

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.