Product successfully added to your shopping cart
3RA2317-8XB11-1BB4
SIEMENS
1
Reversing contactor assembly AC-3, 5.5 kW/400 V, 24 V DC 3-pole, Size S00 screw terminal without NC contact interlock with 1 NO
CONTROL AND CONTACTORS > Contactors for switching motors
* Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
product brand name | SIRIUS | |
Product designation | reversing contactor assembly 3RA23 | |
Manufacturer's article number | ||
● 1 of the supplied contactor | 3RT2017-1BB41 | |
● 2 of the supplied contactor | 3RT2017-1BB41 | |
● of the supplied RH assembly kit | 3RA2913-2AA1 | |
General technical data: | ||
Size of contactor | S00 | |
Product extension | ||
● Auxiliary switch | Yes | |
Insulation voltage | ||
● with degree of pollution 3 rated value | 690 V | |
Degree of pollution | 3 | |
Surge voltage resistance rated value | 6 kV | |
Protection class IP | ||
● on the front | IP20 | |
Shock resistance | 9.8g / 5 ms and 5.9g / 10 ms | |
● at rectangular impulse | ||
— at AC | 7,3g / 5 ms, 4,7g / 10 ms | |
— at DC | 7.3g / 5 ms, 4.7g / 10 ms | |
● with sine pulse | ||
— at AC | 11,4g / 5 ms, 7,3g / 10 ms | |
— at DC | 11,4g / 5 ms, 7,3g / 10 ms | |
Mechanical service life (switching cycles) | ||
● of contactor typical | 10 000 000 | |
● of the contactor with added auxiliary switch block typical | 10 000 000 | |
Equipment marking | ||
● acc. to DIN EN 81346-2 | Q | |
Ambient conditions: | ||
Installation altitude at height above sea level maximum | 2 000 m | |
Ambient temperature | ||
● during operation | -25 ... +60 °C | |
● during storage | -55 ... +80 °C | |
Main circuit: | ||
Number of poles for main current circuit | 3 | |
Number of NO contacts for main contacts | 3 | |
Number of NC contacts for main contacts | 0 | |
Operating voltage | ||
● at AC-3 rated value maximum | 690 V | |
Operating current | ||
● at AC-1 at 400 V | ||
— at ambient temperature 40 °C rated value | 22 A | |
— at ambient temperature 60 °C rated value | 20 A | |
● at AC-2 at 400 V rated value | 7 A | |
● at AC-3 | ||
— at 400 V rated value | 12 A | |
Operating current | ||
● at 1 current path at DC-1 | ||
— at 24 V rated value | 20 A | |
— at 110 V rated value | 2.1 A | |
● with 2 current paths in series at DC-1 | ||
— at 24 V rated value | 20 A | |
— at 110 V rated value | 12 A | |
● with 3 current paths in series at DC-1 | ||
— at 24 V rated value | 20 A | |
— at 110 V rated value | 20 A | |
Operating current | ||
● at 1 current path at DC-3 at DC-5 | ||
— at 24 V rated value | 20 A | |
— at 110 V rated value | 0.15 A | |
● with 2 current paths in series at DC-3 at DC-5 | ||
— at 110 V rated value | 0.35 A | |
— at 24 V rated value | 20 A | |
● with 3 current paths in series at DC-3 at DC-5 | ||
— at 110 V rated value | 20 A | |
— at 24 V rated value | 20 A | |
No-load switching frequency | 1 500 1/h | |
Operating frequency | ||
● at AC-1 maximum | 1 000 1/h | |
● at AC-2 maximum | 750 1/h | |
● at AC-3 maximum | 750 1/h | |
● at AC-4 maximum | 250 1/h | |
Control circuit/ Control: | ||
Type of voltage of the control supply voltage | DC | |
Control supply voltage 1 | ||
● at DC rated value | 24 V | |
Operating range factor control supply voltage rated value of magnet coil at DC | 0.85 ... 1.1 | |
Closing power of magnet coil at DC | 4 W | |
Holding power of magnet coil at DC | 4 W | |
Auxiliary circuit: | ||
Number of NC contacts | ||
● for auxiliary contacts | ||
— per direction of rotation | 0 | |
— instantaneous contact | 0 | |
Number of NO contacts | ||
● for auxiliary contacts | ||
— per direction of rotation | 1 | |
— instantaneous contact | 2 | |
Operating current of auxiliary contacts at AC-12 maximum | 10 A | |
Operating current of auxiliary contacts at AC-15 | ||
● at 230 V | 6 A | |
● at 400 V | 3 A | |
Operating current of auxiliary contacts at DC-13 | ||
● at 24 V | 10 A | |
● at 60 V | 2 A | |
● at 110 V | 1 A | |
● at 220 V | 0.3 A | |
Contact reliability of auxiliary contacts | < 1 error per 100 million operating cycles | |
UL/CSA ratings: | ||
Full-load current (FLA) for three-phase AC motor | ||
● at 480 V rated value | 11 A | |
● at 600 V rated value | 11 A | |
Yielded mechanical performance [hp] | ||
● for single-phase AC motor | ||
— at 110/120 V rated value | 0.5 hp | |
— at 230 V rated value | 2 hp | |
● for three-phase AC motor | ||
— at 200/208 V rated value | 1.5 hp | |
— at 220/230 V rated value | 3 hp | |
— at 460/480 V rated value | 7.5 hp | |
— at 575/600 V rated value | 10 hp | |
Contact rating of auxiliary contacts according to UL | A600 / Q600 | |
Short-circuit protection | ||
Design of the fuse link | ||
● for short-circuit protection of the main circuit | ||
— with type of coordination 1 required | gL/gG NH 3NA, DIAZED 5SB, NEOZED 5SE: 50 A | |
— with type of assignment 2 required | gL/gG LV HRC 3NA, DIAZED 5SB, NEOZED 5SE: 25 A | |
● for short-circuit protection of the auxiliary switch required | fuse gL/gG: 10 A | |
Installation/ mounting/ dimensions: | ||
Mounting position | +/-180° rotation possible on vertical mounting surface; can be tilted forward and backward by +/- 22.5° on vertical mounting surface | |
Mounting type | screw and snap-on mounting onto 35 mm standard mounting rail | |
Height | 68 mm | |
Width | 90 mm | |
Depth | 73 mm | |
Required spacing | ||
● with side-by-side mounting | ||
— forwards | 6 mm | |
— Backwards | 0 mm | |
— upwards | 6 mm | |
— downwards | 6 mm | |
— at the side | 6 mm | |
● for grounded parts | ||
— forwards | 6 mm | |
— Backwards | 0 mm | |
— upwards | 6 mm | |
— at the side | 6 mm | |
— downwards | 6 mm | |
● for live parts | ||
— forwards | 6 mm | |
— Backwards | 0 mm | |
— upwards | 6 mm | |
— downwards | 6 mm | |
— at the side | 6 mm | |
Connections/Terminals: | ||
Type of electrical connection | ||
● for main current circuit | screw-type terminals | |
● for auxiliary and control current circuit | screw-type terminals | |
Type of connectable conductor cross-sections | ||
● for main contacts | ||
— solid | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm² | |
— single or multi-stranded | 2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²), 2x (0,5 ... 4 mm²) | |
— finely stranded with core end processing | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) | |
● at AWG conductors for main contacts | 2x (20 ... 16), 2x (18 ... 14) | |
Type of connectable conductor cross-sections | ||
● for auxiliary contacts | ||
— single or multi-stranded | 2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²) | |
— finely stranded with core end processing | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) | |
● at AWG conductors for auxiliary contacts | 2x (20 ... 16), 2x (18 ... 14) | |
Safety related data: | ||
B10 value | ||
● with high demand rate acc. to SN 31920 | 1 000 000 | |
Proportion of dangerous failures | ||
● with low demand rate acc. to SN 31920 | 40 % | |
● with high demand rate acc. to SN 31920 | 75 % | |
Failure rate [FIT] | ||
● with low demand rate acc. to SN 31920 | 100 FIT | |
T1 value for proof test interval or service life acc. to IEC 61508 | 20 y | |
Communication/ Protocol: | ||
Product function Bus communication | No | |
Protocol is supported | ||
● AS-interface protocol | No |
Title: | Size: | Type: |
---|---|---|
3RA2317-8XB11-1BB4 SIEMENS REV. COMB., AC3, 5.5KW/ 400V DC24V, WITH 1NO 3-POLE, SZ S00 SCREW TERMINAL WIT | 75 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.