Product successfully added to your shopping cart
VAL-MB-T1/T2 1500DC-PV/2+V
2905641
PHOENIX_CONTACT
1
Lightning/surge arrester type 1/2
Trabtech (TT)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2905641 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 41 (C-4-2017) |
GTIN | 4046356984393 |
Weight per Piece (excluding packing) | 488.610 g |
Custom tariff number | 85354000 |
Country of origin | DE (Germany) |
Degree of protection | IP20 (only when all terminal points are used) |
---|---|
Ambient temperature (operation) | -40 °C ... 80 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | ≤ 6000 m (amsl (above mean sea level)) |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | 50g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) | 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
IEC test classification | PV I / II |
---|---|
PV T1 / T2 | |
EN type | T1 / T2 |
IEC power supply system | DC |
SPD failure behavior | OCM (Open-circuit mode) |
Connection configuration | Y configuration |
Installation location | Inside |
Accessibility | Accessible |
Installation location of the disconnect device | Internal |
Mode of protection | (L+) - (L-) |
(L+) - PE | |
(L-) - PE | |
Mounting type | DIN rail: 35 mm |
Color | traffic grey A RAL 7042 |
Housing material | PA 6.6 |
Degree of pollution | 2 |
Flammability rating according to UL 94 | V-0 |
Type | DIN rail module, one-piece |
Surge protection fault message | optical |
Note | The product is also suitable for applications in PV systems with a max. short-circuit current ISCPV= 15 kA (according to EN 50539-11:2013). |
---|
Maximum continuous operating voltage UCPV | 1500 V DC |
---|---|
Short-circuit current rating ISCPV | 2000 A |
Continuous operating current ICPV | < 100 µA |
Rated load current IL | 50 A |
Residual current IPE | ≤ 100 µA DC |
≤ 540 µA AC | |
Standby power consumption PC | ≤ 150 mVA |
Nominal discharge current (8/20) µs | 20 kA |
Maximum discharge current Imax(8/20) µs | 40 kA |
Impulse discharge current (10/350) µs, charge | 3.125 As |
Impulse discharge current (10/350) µs, specific energy | 9.77 kJ/Ω |
Impulse discharge current (10/350) µs, peak value limp | 6.25 kA |
Total discharge current Itotal(8/20) µs | 40 kA |
Total discharge current Itotal(10/350) µs | 12.5 kA |
Voltage protection level Up | ≤ 4.5 kV |
Residual voltage Ures | ≤ 4.5 kV (at In) |
≤ 3.3 kV (at 3 kA) | |
≤ 3.6 kV (at 6.25 kA) | |
≤ 3.8 kV (at 10 kA) | |
≤ 4.2 kV (at 15 kA) | |
≤ 5.4 kV (at 40 kA) | |
Response time tA | ≤ 25 ns |
Insulation resistance Riso | > 5 GΩ (at 500 V DC) |
Connection method | Screw connection |
---|---|
Screw thread | M5 |
Tightening torque | 3 Nm |
Stripping length | 16 mm |
Conductor cross section flexible | 2.5 mm² ... 35 mm² |
2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. | 2.5 mm² |
2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. | 10 mm² |
Conductor cross section AWG | 14 ... 2 |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX PROTECTION EN.pdf | 27 Mbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.