UM-EC56/56/KDS3-PMT/XUR 2976640 PHOENIX CONTACT Interface module View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

UM-EC56/56/KDS3-PMT/XUR 2976640 PHOENIX CONTACT Interface module

UM-EC56/56/KDS3-PMT/XUR

2976640

PHOENIX_CONTACT

50

Interface module

Interconnect module, connection 1: Screw connection with interrupting knife, connection 2: EDAC / ELCO 1x 56-pole sprat (ELCO sprat type 8016 / EDAC sprat type 516, right)

Termination board, connection 1: EDAC / ELCO pin strip 1x 56-position (ELCO pin strip type 8016/EDAC pin strip type 516, right), connection 2: Screw connection with disconnect knife 55-position

More details


INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Technical data

Product properties
Product typeInterface module
Number of positions56
Insulation characteristics: Air clearances and creepage distances
InsulationFunctional insulation
Overvoltage categoryII
Pollution degree2

Electrical properties
Operating voltage (AC)≤ 30 V AC
Operating voltage (DC)≤ 50 V
Current (per branch)≤ 2 A
Current (Total current)≤ 55 A
Air clearances and creepage distances
Rated insulation voltage50 V
Rated surge voltage0.5 kV (1.2/50 μs)

Connection data
Connection 1 (control level)
Connection methodEDAC / ELCO pin strip
Coding1-1
Number of connections1
Number of positions56
NoteELCO pin strip type 8016/EDAC pin strip type 516, right
Pitch3.81 mm
Connection 2 (field level)
Connection methodScrew connection with disconnect knife
Stripping length8 mm
Screw threadM3
Number of positions55
Conductor cross section rigid0.2 mm² ... 4 mm²
Conductor cross-section rigid (2 conductors with same cross section)0.2 mm² ... 1 mm²
Conductor cross section flexible0.2 mm² ... 4 mm²
0.25 mm² ... 1.5 mm² (Ferrule without plastic sleeve)
0.25 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)0.2 mm² ... 1 mm²
0.25 mm² ... 0.75 mm² (Ferrule without plastic sleeve)
0.5 mm² ... 1 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG24 ... 12
Tightening torque0.5 Nm ... 0.6 Nm
Pitch5.08 mm

Signaling
Status display presentNo

Dimensions
Item dimensions
Width180 mm
Height111 mm
Depth49 mm

Environmental and real-life conditions
Ambient conditions
Degree of protection (Module)IP00
Degree of protection (Installation location)≥ IP54
Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C
Altitude≤ 2000 m

Standards and regulations
Air clearances and creepage distances
Standards/regulationsEN IEC 60664-1

Mounting
Mounting typeDIN rail mounting
Mounting positionany

Notes
Notes on operationFor proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.