UM-32 NAM/I/M/DV 2305046 PHOENIX CONTACT Active module View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

UM-32 NAM/I/M/DV 2305046 PHOENIX CONTACT Active module

UM-32 NAM/I/M/DV

2305046

PHOENIX_CONTACT

Active module

More details


INTERFACE Components (IF)

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Key Commercial Data

Orderkey 2305046
Packing unit 1 pc
NoteMade to Order (non-returnable)
Catalog pagePage 286 (NTK-2006)
GTIN4017918995744
Weight per Piece (excluding packing)417.060 g
Custom tariff number85364190
Country of originDE (Germany)

Dimensions

Width181 mm
Height126 mm
Depth75 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C

Input data

Nominal input voltage UN24 V DC ±20 %
Typical input current at UNmax. 320 mA
Type of protectionReverse polarity protection
Protective circuit/componentPolarity protection diode
Type of protectionFuse
Protective circuit/componentFuse (400 mA)
Operating voltage displayGreen LED
Transmission frequency350 Hz

Output data

Maximum switching voltage30 V DC
Limiting continuous current10 mA
Operating voltage displayGreen LED
Error detection (line break / short-circuit)LED red

General

No. of channels32
Mounting positionany
Assembly instructionsIn rows with zero spacing
Housing insulation materialPolyamide PA non-reinforced
Colorgreen

Connection data for connection 1

Connection nameField level
Connection in acc. with standardIEC / EN
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.2 mm² ... 4 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12
Number of connections103
Number of positions6

Connection data for connection 2

Connection nameController level
Connection methodIDC/FLK pin strip
Number of connections1
Number of positions50
Pitch2.54 mm

Control circuit

Non-load voltage8.2 V DC ±10 %
Switching point≥ 2.1 mA (In conductive state)
≤ 1.2 mA (In blocking state)
6.3 mA ... 10 mA (in the event of a short-circuit)
0 mA ... 0.35 mA (In the event of a wire break)
Switching hysteresisapprox. 0.2 mA
Internal resistanceapprox. 1 kΩ
Short-circuit current≤ 10 mA

Supported controller

Corresponding controlEmerson DeltaV
Corresponding I/O cardVE4001S2T2B5

Standards and Regulations

Standards/regulationsDIN EN 50178
Rated surge voltage0.4 kV (basic insulation)
Degree of pollution2
Overvoltage categoryI

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.