SM-7ES1N8A8S24X 1242769 PHOENIX CONTACT Cable connector, long straight, Screw lock, M40, number of poles: 4+.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

SM-7ES1N8A8S24X 1242769 PHOENIX CONTACT Cable connector, long straight, Screw lock, M40, number of poles: 4+..

SM-7ES1N8A8S24X

1242769

PHOENIX_CONTACT

Cable connector, long straight, Screw lock, M40, number of poles: 4+3+PE, contact type: Female, shielded: yes, protection rating: IP67, cable diameter range: 20.5 mm ... 26.5 mm, number of poles: 8, connection type: Crimped connection, series: SM, The article does not contain lead according to the RoHS II directive without the exception 6c (Pb< 0.1%)

Cable connector, straight long, Screw locking mechanism, M40, number of positions: 4+3+PE, contact connection type: Socket, shielded: yes, degree of protection: IP67, cable diameter range: 20.5 mm ... 26.5 mm, number of positions: 8, connection method: Crimp connection, series: SM, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0.1%)

More details


Field Device Connectors (FDC)

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total price: $114.19
Unit price: $114.19

Quantity Price
1+$114.19
3+$102.82
6+$93.14
9+$89.20
12+$87.55
*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Viewed products


Related products

More info



Technical data

Notes
GeneralOrder crimp contacts 4 x Ø 2 mm, 4 x Ø 3.6 mm separately
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Mounting
Connection methodCrimp connection

Product properties
Product typeCircular connector (cable-side)
Number of positions8
Connection profile4+3+PE
ApplicationPower
SeriesSM
Shieldedyes
CodingN
Thread typeM40

Material specifications
Seal materialFPM
Housing materialTurned parts: copper zinc alloy (CuZn), aluminum (Al), die-cast parts: zinc (GD-Zn)
Insulator materialPA 6.6
Gasket and O-ring materialFPM
Housing materialMetal

Connection data
Conductor connection
Connection methodCrimp connection

Electrical properties
Contact
Contact diameter3.6 mm
Max. current70 A
Nominal voltage UN630 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage6 kV
Contact
Contact diameter2 mm
Max. current30 A
Nominal voltage UN250 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage4 kV

Connector
Typestraight long
Connection 1
Head designSocket

Cable/line
External cable diameter20.5 mm ... 26.5 mm

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
Ambient temperature (operation)-40 °C ... 125 °C
Altitude3000 m

Datasheet - PDF

Title: Size: Type:
PDF CATALOG PHOENIX CONNECTORS EN.pdf 57 Mbytes

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.