Product successfully added to your shopping cart
PSR-SPP- 24DC/ESD/5X1/1X2/2T 5
2981211
PHOENIX_CONTACT
1
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with fixed 2.5 s dropout delay, plug-in spring-cage terminal block
Safety
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Width | 45 mm |
---|---|
Height | 112 mm |
Depth | 114.5 mm |
Ambient temperature (operation) | -20 °C ... 55 °C (observe derating) |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
Shock | 15g |
Vibration (operation) | 10 Hz ...150 Hz, 2g |
Maximum altitude | ≤ 2000 m (Above sea level) |
Rated control circuit supply voltage US | 24 V DC -15 % / +10 % |
---|---|
Power consumption at US | typ. 3.6 W |
Rated control supply current IS | typ. 150 mA |
Typical inrush current | 200 mA |
Current consumption | < 40 mA (with Us/Ix to S10) |
< 40 mA (with Us/Ix to S12) | |
> -40 mA (with Us/Ix to S22) | |
0 mA (with Us/Ix to S34) | |
< 5 mA (with Us/Ix to S35) | |
Voltage at input/start and feedback circuit | approx. 23 V DC |
Typical response time | < 70 ms (Monitored/manual start) |
< 600 ms (automatic start) | |
Typical pick-up time | < 600 ms (when controlled via A1) |
Typical release time | < 20 ms (with Us / when controlled via S11/S12 and S21/S22(K1/K2)) |
< 20 ms (with Us / when controlled via A1) | |
Concurrence input 1/2 | ∞ |
Recovery time | < 1 s |
Status display | 4 x green LEDs |
Maximum switching frequency | 0.5 Hz |
Max. permissible overall conductor resistance | approx. 11 Ω (Input and start circuits at UN) |
Filter time | 1 ms (at A1 in the event of voltage dips at Us) |
max. 1.5 ms (at S10, S12; test pulse width) | |
7.5 ms () |
Contact type | 3 enabling current paths undelayed |
---|---|
2 enabling current paths delayed | |
1 signaling current path undelayed | |
Contact material | AgSnO2 |
Minimum switching voltage | 15 V AC/DC |
Maximum switching voltage | 250 V AC/DC |
Limiting continuous current | 6 A (N/O contact) |
3 A (N/C contact) | |
Inrush current, minimum | 25 mA |
Maximum inrush current | 6 A |
Sq. Total current | 55 A2 (see to derating) |
Interrupting rating (ohmic load) max. | 144 W (24 V DC, τ = 0 ms) |
288 W (48 V DC, τ = 0 ms) | |
110 W (110 V DC, τ = 0 ms) | |
88 W (220 V DC, τ = 0 ms) | |
1500 VA (250 V AC, τ = 0 ms) | |
Maximum interrupting rating (inductive load) | 42 W (24 V DC, τ = 40 ms) |
42 W (48 V DC, τ = 40 ms) | |
42 W (110 V DC, τ = 40 ms) | |
42 W (220 V DC, τ = 40 ms) | |
Switching capacity min. | 0.4 W |
Output fuse | 6 A gL/gG (N/C contact) |
10 A gL/gG (N/O contact (undelayed)) | |
10 A gL/gG (N/O contact (delayed)) |
Relay type | Electromechanical relay with forcibly guided contacts in accordance with EN 50205 |
---|---|
Mechanical service life | Approx. 107 cycles |
Net weight | 463.9 g |
Mounting type | DIN rail mounting |
Degree of protection | IP54 |
IP20 | |
Min. degree of protection of inst. location | IP54 |
Mounting position | any |
Control | one and two channel |
Parameters as per EN ISO 13849 | 4 (undelayed contacts) |
3 (delayed contacts) | |
Stop category | 0 (For non-delayed contacts) |
1 (For delayed contacts) | |
Parameters for IEC 61508 | 3 |
Housing material | PBT |
Connection method | Spring-cage connection |
---|---|
pluggable | Yes |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 1.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 1.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 16 |
Stripping length | 8 mm |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes | |
PHOENIX CONTACT-2981211-PSR-SPP- 24DC/ESD/5X1/1X2/2T 5 | 128 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.