ELR W3-230AC/500AC- 9I 2297060 PHOENIX CONTACT "4 in 1" three-phase semiconductor reversing contactor with 2.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

ELR W3-230AC/500AC- 9I 2297060 PHOENIX CONTACT "4 in 1" three-phase semiconductor reversing contactor with 2..

ELR W3-230AC/500AC- 9I




Ship on today

"4 in 1" three-phase semiconductor reversing contactor with 230 V AC input, 9 A output current, emergency stop function, and adjustable overload switching.

More details

Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Solid state relays and power electronics. Relay - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

1+91,22 €
2+88,80 €
3+87,59 €
4+86,83 €
6+86,13 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

Input data

Input nameDevice supply
Mains frequency40 Hz
100 Hz
Rated control circuit supply voltage US230 V AC
Voltage range with reference to US0.4 ... 1.1
Rated control supply current IS4 mA
Rated actuating voltage UC230 V AC
Voltage range with reference to UC0.4 ... 1.1
Rated actuating current IC7 mA
Protective circuitSurge protection
Typical response time< 35 ms
Typical turn-off time< 80 ms
Operating voltage displayGreen LED
Status displayYellow LED
IndicationRed LED
Input nameControl input right/left
Switching threshold44 V AC (“0” signal)
85 V AC (“1” signal)

Output data load output

Nominal output voltage500 V AC
Nominal output voltage range42 V AC ... 550 V AC
Load current range1.5 A ... 9 A (see to derating)
Rated operating current at AC-519 A
Rated operating current at AC-53a6.5 A
Leakage current0 mA
Residual voltage< 0.5 V
Surge current100 A (t = 10 ms)
Protective circuitSurge protection

Output data reply output

NoteConfirmation 01: Floating PDT contact

Measuring technology and signaling contact

Measuring viaCurrent transformer for line current on L1 and L3
Current range1 A ... 45 A

Connection data, control circuit

Connection nameControl circuits
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 14


Test voltage input/output4 kVrms
Mounting positionVertical (horizontal DIN rail)
Assembly instructionsCan be aligned with spacing = 20 mm
Operating mode100% operating factor
Standards/regulationsDIN EN 50178
EN 60947
DesignationPower station requirements
Standards/regulationsDWR 1300 / ZXX01/DD/7080.8d
DesignationAir clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178
Insulationsafe isolation
Pollution degree2
Overvoltage categoryIII
Reversing frequency≤ 2 Hz


Width22.5 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Degree of protectionIP20

Datasheet - PDF

PHOENIX CONTACT-2297060-ELR W3-230AC/500AC- 9IEnglish148 KbytesPHOENIX CONTACT-2297060-ELR W3-230AC/500AC- 9I

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review