No products
Product successfully added to your shopping cart
View larger
REL-OR-230AC/2X21 2834261 PHOENIX CONTACT Single relay
REL-OR-230AC/2X21
2834261
PHOENIX_CONTACT
10
Single relay
Plug-in octal relays with power contacts, 2 changeover contacts, test button, mechanical switching position indicator, coil voltage: 230 V AC
Industrial Relays
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲| Product type | Single relay |
| Operating mode | 100% operating factor |
| Mechanical service life | 10x 106cycles |
| Data management status | |
| Date of last data management | 22.05.2024 |
| Insulation characteristics | |
| Overvoltage category | II |
| Pollution degree | 3 |
| Service life electrical | see diagram |
| Maximum power dissipation for nominal condition | 2.3 W |
| Test voltage (Winding/contact) | 2.5 kV AC (50 Hz, 1 min., winding/contact) |
| Test voltage (Contact/contact) | 2.5 kV AC (50 Hz, 1 min., contact/contact) |
| Coil side | |
| Nominal input voltage UN | 230 V AC |
| Input voltage range | 184 V AC ... 253 V AC |
| Input voltage range in reference to UN | 0.8 ... 1.1 |
| Mains frequency | 50/60 Hz |
| Drive and function | monostable |
| Typical input current at UN | 10 mA (at 50 Hz) |
| 11 mA (At 60 Hz) | |
| Typical response time | 5 ms ... 20 ms (AC, depending on phase relation) |
| Typical release time range | 5 ms ... 20 ms (AC, depending on phase relation) |
| Coil resistance | 6170 Ω ±15 % (at 20 °C) |
| Switching | |
| Contact switching type | 2 changeover contacts |
| Type of switch contact | Single contact |
| Contact material | AgSnIn |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 1 V |
| Limiting continuous current | 10 A (N/O contact) |
| 5 A (N/C contact) | |
| Maximum inrush current | on request |
| Min. switching current | 10 mA |
| Interrupting rating (ohmic load) max. | 2500 VA (for 250 V AC) |
| Connection method | Plug-in connection |
| Width | 34.5 mm |
| Height | 34.5 mm |
| Depth | 52.5 mm |
| Ambient conditions | |
| Degree of protection | RT I |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient temperature (operation) | -40 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 60 °C |
| Altitude | ≤ 2000 m |
| Standards/regulations | IEC 60664 |
| Assembly note | On relay base PR3 |
| Mounting position | any |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN .pdf | 28 Mbytes |
|
| PHOENIX CONTACT-2834261-REL-OR-230AC/2X21 | 131 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.