Product successfully added to your shopping cart
REL-OR3/LDP-125DC/3X21
2909207
PHOENIX_CONTACT
50
Plug-in octal relays with power contacts, 3 changeover contacts, test button, freewheeling diode, mechanical switch position indicator, polarity A1+, A2-, input voltage: 125 V DC
Industrial Relays
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2909207 |
---|---|
Packing unit | 1 pc |
Minimum order quantity | 50 pc |
Catalog page | Page 308 (C-5-2019) |
GTIN | 4055626360171 |
Weight per Piece (excluding packing) | 88.000 g |
Custom tariff number | 85364900 |
Country of origin | PL (Poland) |
Note | The outputs are not suitable for switching different outer conductors. |
---|---|
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed. |
Ambient temperature (operation) | -40 °C ... 70 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Maximum altitude | ≤ 2000 m |
Degree of protection | RT I |
≥ IP54 (Installation location) |
Nominal input voltage UN | 125 V DC |
---|---|
Typical input current at UN | 14 mA |
Typical response time | 18 ms |
Typical release time | 20 ms |
Protective circuit | Damping diode |
Status display | Yellow LED |
Voltage type for actuation | DC |
Power dissipation for nominal condition | 1.44 W |
Contact type | 3 PDTs |
---|---|
Type of switch contact | Single contact |
Contact material | AgNi |
Maximum switching voltage | 250 V DC |
440 V AC | |
Minimum switching voltage | 10 V (At 24 mA) |
Min. switching current | 10 mA (at 24 V) |
Maximum inrush current | 30 A (20 ms, N/O contacts) |
Limiting continuous current | 10 A |
Interrupting rating (ohmic load) max. | 240 W (at 24 V DC) |
124 W (at 48 V DC) | |
108 W (at 60 V DC) | |
52 W (at 110 V DC) | |
48 W (at 220 V DC) | |
2500 VA (for 250 V AC) | |
Motor load according to UL 508 | 1/2 HP, 240 V AC (N/O contact) |
Test voltage relay winding/relay contact | 2.5 kVrms(50 Hz, 1 min.) |
---|---|
Test voltage PDT/PDT | 2.5 kVrms(50 Hz, 1 min.) |
Operating mode | 100% operating factor |
Mechanical service life | approx. 2x 107cycles |
Mounting position | any |
Standards/regulations | IEC 60664 |
---|---|
IEC 61810 | |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 4 kV |
Insulation | Basic insulation |
Pollution degree | 3 |
Overvoltage category | III |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
eCl@ss 5.0 | 27371601 |
---|---|
eCl@ss 5.1 | 27371601 |
eCl@ss 6.0 | 27371601 |
eCl@ss 7.0 | 27371601 |
eCl@ss 8.0 | 27371601 |
eCl@ss 9.0 | 27371601 |
ETIM 2.0 | EC001437 |
---|---|
ETIM 3.0 | EC001437 |
ETIM 4.0 | EC001437 |
ETIM 5.0 | EC001437 |
ETIM 6.0 | EC001437 |
ETIM 7.0 | EC001437 |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.