Product successfully added to your shopping cart
REL-FO/LRC-120AC/1X21/MS
1308327
PHOENIX_CONTACT
10
Plug-in miniature relay with mechanical switching position indicator, FASTON connection, 1 switch, status indication: yellow LED, Free-flowing diode, RC module, Input voltage: 120 VAC
Plug-in miniature relay with mechanical switching position indicator, FASTON connection, 1 changeover contact, status display: Yellow LED, RC element, Input voltage: 120 V AC
Home > PHOENIX CONTACT
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
General | Do not use to separate SELV/PELV circuits from other circuits, because safe isolation is not guaranteed. (applies to the optocoupler variants) |
General | The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact. |
Product type | Single relay |
Product family | ESSENTIAL edition |
Operating mode | 100% operating factor |
Mechanical service life | approx. 3x 107cycles |
Relay type | Electromechanical relay |
Insulation characteristics: Air clearances and creepage distances between the power circuits | |
Insulation | Basic insulation |
Overvoltage category | II |
Pollution degree | 3 |
Maximum power dissipation for nominal condition | 1 W |
Test voltage (Winding/contact) | 5 kVrms(50 Hz, 1 min., winding/contact) |
Test voltage () | 1 kVrms(50 Hz, 1 min., open contact) |
Air clearances and creepage distances between the power circuits | |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 2.5 kV |
Coil side | |
Nominal input voltage UN | 120 V AC |
Input voltage range | 96 V AC ... 132 V AC |
Mains frequency | 50/60 Hz |
Drive and function | monostable |
Drive (polarity) | non-polarized |
Typical input current at UN | 10 mA (50 Hz) |
Input power dissipation for UN | 1.2 W |
Typical response time | 2 ms ... 15 ms |
Typical release time range | 5 ms ... 20 ms |
Protective circuit | RC element |
Status display | Yellow LED |
Coil resistance | 6400 Ω ±10 % |
Switching | |
Contact switching type | 1 changeover contact |
Type of switch contact | Single contact |
Contact material | AgSnO |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V (100 mA) |
Limiting continuous current | 12 A |
Maximum inrush current | 24 A (20 ms, N/O contacts) |
Inrush current, minimum | 100 mA (5 V) |
Interrupting rating (ohmic load) max. | 288 W (24 V DC) |
360 W (30 V DC) | |
3000 VA (250 V AC) |
Cross section AWG | (converted acc. to IEC) |
Connection method | FASTON connection |
Width | 13 mm |
Height | 31.1 mm |
Depth | 35 mm |
Ambient conditions | |
Degree of protection (Relay) | RT II (Relay) |
Degree of protection (Installation location) | IP54 (Installation location) |
Ambient temperature (operation) | -40 °C ... 70 °C |
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Altitude | ≤ 2000 m |
Standards/regulations | IEC 61810-1 |
IEC 60664-1 | |
Air clearances and creepage distances between the power circuits | |
Standards/regulations | IEC 60664-1 |
Mounting position | any |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.