PV-FT-C3M-C-2,5-4-VPE250 1196772 PHOENIX CONTACT Crimp Contact, Item Family: Sunclix, Pole Number: 1, Min. C.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PV-FT-C3M-C-2,5-4-VPE250 1196772 PHOENIX CONTACT Crimp Contact, Item Family: Sunclix, Pole Number: 1, Min. C..

PV-FT-C3M-C-2,5-4-VPE250

1196772

PHOENIX_CONTACT

250

Crimp Contact, Item Family: Sunclix, Pole Number: 1, Min. Conductor Cross-Section: 2.5 mm², Max. Conductor Cross-Section: 4 mm², Rated Current: 27 A, Connection Type: Crimp, Contact Connection Type: Male

More details


Field Device Connectors (FDC)

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
250+$0.83
500+$0.73
750+$0.70
1000+$0.67
1500+$0.65
*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Viewed products


Related products

More info



Technical data

Notes
Safety Indication
Safety Notes• WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them.
• WARNING: only qualified personnel specialized in electrical engineering can install and use the product, always taking into account the following safety indications. Specialized personnel must be familiar with the fundamentals of electrical engineering. You must be able to identify and avoid hazards. The corresponding symbol on the packaging indicates that personnel specialized in electrical engineering are required for installation and operation.
WARNING: Connectors should not be plugged in or unplugged under load. Failure to comply and improper use can result in property damage and personal injury.
• The products are suitable for the areas of application of the construction of electrical equipment, control systems and systems.
• Ready-made products may not be tampered with or opened in an unauthorized manner.
• Use only mating connectors that comply with the technical data of the specified standards (e.g. those indicated on the product accessories on the website on phoenixcontact.com/products).
• The user is responsible for using the product directly in conjunction with products from other manufacturers.
• With operating voltages > 50 V AC, electrically conductive connector housings must be grounded
• Check that the functional or protective ground is properly connected.
• Please note the relevant technical data. You will find the data:
or in the product
or on the packaging label
or in the documentation provided
or on the website phoenixcontact.com/products by selecting the product
• Please note the Design In assembly/documentation instructions in the download area of the product website on phoenixcontact.com/products.
• Do not close plugged-in connectors with a cap. You will find the right accessory in the accessories section of the article, under phoenixcontact.com/products
• The connector heats up during normal operation. Depending on the ambient conditions, the surface of the connector may also heat up. In this case, the user will be responsible for affixing the warning indications (e.g. DIN EN ISO 13732-1:2008-12).
• Use connectors only fully plugged in and locked.
• When laying the cable, check that the tensile load applied to the connectors does not exceed the limits set out in the standards.
• Respect the minimum bending radius of the cable. Lay the cord without forcing it.

Item Properties
Product TypeBushings
Product FamilySunclix
Number of poles1

Dimensions
Width5.2 mm
Height6.2 mm
Longitude27.6 mm

Electrical Properties
Rated current (2.5 mm²)27 A
Rated current (4.0 mm²)34 A
Low contact resistance< 0.3 mΩ (Crimp to Crimp)

Mechanical Properties
Mechanical data
Plug Cycles100
Insertion Force< 45 N ±10 N

Material Data
Contact materialCu
Material: Contact SurfaceAg

Cable/Line
Single Driver, Section2.5 mm² 4 mm²
Stripping Length of Individual Conductors9 mm -1 mm

assembly
Connection typeSetting

Environmental and life-life conditions
Environmental conditions
Ambient Temperature (Service)-40 °C ... 85 °C
Ambient Temperature (Mounting)-5 °C ... 50 °C

Datasheet - PDF

Title: Size: Type:
PDF CATALOG PHOENIX CONNECTORS EN.pdf 57 Mbytes

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.