PV-FT-C3F-C-2,5-4-VPE250 1196774 PHOENIX CONTACT Crimp Contact, Item Family: Sunclix, Number of Poles: 1, Mi.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PV-FT-C3F-C-2,5-4-VPE250 1196774 PHOENIX CONTACT Crimp Contact, Item Family: Sunclix, Number of Poles: 1, Mi..

PV-FT-C3F-C-2,5-4-VPE250

1196774

PHOENIX_CONTACT

250

Crimp Contact, Item Family: Sunclix, Number of Poles: 1, Min. Conductor Section: 2.5 mm², Max. Conductor Section: 4 mm², Rated Current: 27 A, Connection Type: Crimp, Contact Connection Type: Female

Crimp contact, Range of articles: Sunclix, number of positions: 1, min. conductor cross section: 2.5 mm2, max. conductor cross section: 4 mm2, rated current: 27 A, Connection method: Crimp, Contact connection type: Socket

More details


Field Device Connectors (FDC)

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
250+$0.84
500+$0.74
750+$0.70
1000+$0.68
1500+$0.65
*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

More info



Technical data

Notes
Safety note
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.

Product properties
Product typePanel feed-through
Product familySunclix
Number of positions1

Dimensions
Width6.2 mm
Height6.2 mm
Length31.6 mm

Electrical properties
Rated current (2.5 mm²)27 A
Rated current (4.0 mm²)34 A
Contact resistance< 0.3 mΩ (Crimp to crimp)

Mechanical properties
Mechanical data
Insertion/withdrawal cycles100
Insertion force< 45 N ±10 N

Material specifications
Contact materialCu
Contact surface materialAg

Cable/line
Single wire, cross section2.5 mm² 4 mm²
Stripping length of the individual wire9 mm -1 mm

Mounting
Connection methodCrimp

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-40 °C ... 85 °C
Ambient temperature (assembly)-5 °C ... 50 °C

Datasheet - PDF

Title: Size: Type:
PDF CATALOG PHOENIX CONNECTORS EN.pdf 57 Mbytes

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.