PV-C-M/F-PRO/F-1000/8 1083769 PHOENIX CONTACT Photovoltaic connector, Fuse plug, color: black, rated current.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PV-C-M/F-PRO/F-1000/8 1083769 PHOENIX CONTACT Photovoltaic connector, Fuse plug, color: black, rated current..

PV-C-M/F-PRO/F-1000/8

1083769

PHOENIX_CONTACT

8

Photovoltaic connector, Fuse plug, color: black, rated current: 8 A

More details


Connectors > Circular connector for field assembly (industrial connector)

Field Device Connectors (FDC)

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Key Commercial Data

Orderkey1083769
Packing unit1
GTIN4055626819549
Custom tariff number85363010

Drawings



Dimensional drawing

Dimensional drawing

Back to top

Ambient conditions

Degree of protection (when plugged in)IP66 / IP68 (2 m / 24 h)
Ambient temperature (operation)-40 °C ... 105 °C (Depending on the current carrying capacity/derating curve)
Ambient temperature (assembly)-25 °C ... 50 °C
Back to top

General

Insertion force45 N ±10 N
Disconnect force250 N ±100 N
Degree of protectionIP66 / IP68 (2 m / 24 h)
Rated voltage1000 V
Rated surge voltage12 kV
Fuse-link nominal current8 A DC
Fuse adapter nominal current8 A DC (Nominal current of the fuse-link)
Back to top

Material

Colorblack
Insulating materialmPPE
Contact materialCu
Contact surface materialAg
Flammability rating according to UL 94V0
Back to top

Connection data

Contact resistance with connected conductor18.5 mΩ
Back to top

Standards and Regulations

Flammability rating according to UL 94V0
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
Back to top

Environmental Product Compliance

China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Back to top

Classifications

eCl@ss

eCl@ss 9.027440107
Back to top

ETIM

ETIM 6.0EC002635
ETIM 7.0EC002635
Back to top

Datasheet - PDF

Title: Size: Type:
PDF CATALOG PHOENIX CONNECTORS EN.pdf 57 Mbytes

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.