Product successfully added to your shopping cart
PTSA 1,5/14-3,5-F PAMIX17RZ
1793147
PHOENIX_CONTACT
1
PCB terminal, rated current: 8 A, dimensioning voltage (III/2): 250 V, nominal cross-section: 1.5 mm², number of rows: 1, number of poles per row: 14, item family: PTSA 1.5, pitch: 3.5 mm, connection type: Push-in spring connection, mounting: Wave soldering, conductor/PCB connection direction: 45°, Color: Multicolor, Pin Arrangement: Linear Front Pin Arrangement, Pin Length [P]: 3.6mm, Number of Solder Pins by Potential: 1, Packing Type: Boxed Packaging
PCB Connectors (PCC)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Construction | Terminal block for card |
Product Line | COMBICON Terminals S |
Product Type | Printed Circuit Board Terminal |
Product Family | PTSA 1.5 |
Number of poles | 14 |
Step | 3.5 mm |
Number of rows | 1 |
Pin Design | Linear Front Pin Arrangement |
Number of Solder Pins Per Potential | 1 |
Nominal Current IN | 8 A |
Nominal voltage UN | 250 V |
Degree of pollution | 3 |
Sizing voltage (III/3) | 200 V |
Dimensioning transient voltage (III/3) | 2.5 kV |
Dimensioning voltage (III/2) | 250 V |
Dimensioning Transient Voltage (III/2) | 2.5 kV |
Nominal voltage (II/2) | 400 V |
Dimensioning transient voltage (II/2) | 2.5 kV |
Connection technology | |
Construction | Terminal block for card |
Nominal Section | 1.5 mm² |
Connecting Conductors | |
Connection type | Push-in spring connection |
Rigid conductor section | 0.2 mm² ... 1.5 mm² |
Flexible conductor section | 0.2 mm² ... 1.5 mm² |
AWG Conductor Section | 24 ... 16 |
Flexible conductor section with toe cap, without plastic sleeve | 0.25 mm² ... 1 mm² |
Flexible conductor section with toe cap, with plastic sleeve | 0.25 mm² ... 0.5 mm² |
Peel Length | 9 mm |
Type of mounting | Wave soldering |
Pin Design | Linear Front Pin Arrangement |
Connection type | Push-in spring connection |
Material data - contact | |
Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
Contact material | Cu Alloy |
Surface Characteristics | Malleable cast iron tinning |
Metal surface of the terminal point (top layer) | Tin (4 - 8 μm Sn) |
Metal surface weld area (top layer) | Tin (4 - 8 μm Sn) |
Material data - housing | |
Color (Housing) | Multicolor () |
Insulating material | PA |
Insulating material group | I |
CTI according to IEC 60112 | 600 |
Flammability class according to UL 94 | V0 |
Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
Material data: drive element | |
Color (Drive Element) | Multicolor () |
Dimension Scheme | |
Step | 3.5 mm |
Width [w] | 92.5 mm |
Height [h] | 16.7 mm |
Length [l] | 12 mm |
Overall Height | 13.1 mm |
Weld Pin Length [P] | 3.6 mm |
Temple Dimensions | 0.4 x 0.75 mm |
Printed circuit board design | |
Spacing between rods | 3.5 mm |
Hole diameter | 1 mm |
Checking for damage to conductors and loosening | |
Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
Result | Approved Test |
Tensile Test | |
Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
Conductor Section/Conductor Type/Tensile Force Nominal Value/Actual Value | 0.2 mm² / rigid / > 10 N |
0.2 mm² / flexible / > 10 N | |
1.5 mm² / rigid / > 40 N | |
1.5 mm² / flexible / > 40 N |
Heating Verification | |
Test Specification | IEC 60947-7-4:2013-08 |
Heating test requirement | The sum of the ambient temperature and the heating of the PCB connection terminal cannot exceed the upper limit temperature. |
Short-term permissible current | |
Test Specification | IEC 60947-7-4:2013-08 |
Insulation resistance | |
Test Specification | DIN EN 60512-3-1:2003-01 |
Insulation Resistance Adjacent Poles | > 5 MΩ |
Creepage Lines & Air Isolation Distances | | |
Test Specification | DIN EN 60947-1 (VDE 0660-100):2015-09 |
Insulating material group | I |
Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
Sizing Insulation Voltage (III/3) | 200 V |
Nominal transient voltage (III/3) | 2.5 kV |
minimum value of air insulation distance - non-homogeneous field (III/3) | 1.5 mm |
Minimum creepage line value (III/3) | 2.5 mm |
Warning Regarding the Connection Section | With the 1.5 mm² (rigid) conductor attached. |
Sizing Insulation Voltage (III/2) | 250 V |
Nominal transient voltage (III/2) | 2.5 kV |
Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 1.5 mm |
Minimum creepage line value (III/2) | 1.5 mm |
Sizing Insulation Voltage (II/2) | 400 V |
Nominal transient voltage (II/2) | 2.5 kV |
Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 1.5 mm |
Minimum creepage line value (II/2) | 2 mm |
Vibration test | |
Test Specification | DIN EN 60068-2-6 (VDE 0468-2-6):2008-10 |
frequency | 10 - 150 - 10 Hz |
Sweep speed | 1 octave/min |
Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
Sweep speed | 5g (60.1 Hz ... 150 Hz) |
Test duration per axis | 2.5 h |
Essay filam. incandescent | |
Test Specification | DIN EN 60695-2-10 (VDE 0471-2-10):2001-11 |
Temperature | 850 °C |
Performance Time | 5 s |
Aging | |
Test Specification | IEC 60947-7-4:2013-08 |
Environmental conditions | |
Ambient Temperature (Service) | -40 °C ... 100 °C (Based on current/derating load capacity curve) |
Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
Relative humidity of the air (storage/transport) | 30 % ... 70 % |
Ambient Temperature (Mounting) | -5 °C ... 85 °C |
Type of packaging | Boxed Packaging |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX PCB CONNECTORS EN.pdf | 15 Mbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.