RIF-4-RPT-LV-120AC/3X1 2903274 PHOENIX CONTACT Pre-assembled relay module with push-in connection, consistin.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

RIF-4-RPT-LV-120AC/3X1 2903274 PHOENIX CONTACT Pre-assembled relay module with push-in connection, consistin..






Ship on today

Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 3 N/O contacts. Input voltage: 120 V AC

More details

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Solid state relays and power electronics. Relay - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

5+11,84 €
15+11,31 €
25+11,12 €
35+11,01 €
45+10,96 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width43 mm
Height111 mm
Depth90 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 40 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN120 V AC
Input voltage range in reference to UNsee diagram
Mains frequency50 Hz
60 Hz
Typical input current at UN24 mA
Typical response time5 ms ... 25 ms
Typical release time range5 ms ... 20 ms
Coil voltage120 V AC
Protective circuitVaristor
Operating voltage displayYellow LED

Contact side

Contact type3 N/O contacts
Contact materialAgNi
Maximum switching voltage440 V AC
250 V DC
Minimum switching voltage10 V (At 24 mA)
Min. switching current10 mA (at 24 V)
Maximum inrush current50 A (20 ms, N/O contact)
Limiting continuous current8 A (see diagram)
Interrupting rating (ohmic load) max.216 W (at 24 V DC)
480 W (at 48 V DC)
600 W (at 60 V DC)
660 W (at 110 V DC)
183 W (at 220 V DC)
2250 VA (for 250 V AC)
4000 VA (At 440 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 609471 A (at 24 V, DC13)
1 A (at 120 V, DC13)
1 A (at 220 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1.5 A (at 240 V, AC15)
Motor load according to UL 5081/3 HP, 120 V AC (single-phase AC motor)
1/2 HP, 240 V AC (single-phase AC motor)
1/2 HP, 240 V AC (three-phase induction motor)

Connection data input side

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve)
Conductor cross section AWG26 ... 16


Test voltage relay winding/relay contact2.5 kVrms (50 Hz, 1 min.)
Test voltage relay contact/relay contact2.5 kVrms (50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionIP20 (Relay socket)
RT I (Relay)
Mechanical service lifeApprox. 107 cycles
Standards/regulationsDIN EN 50178
IEC 62103
Rated insulation voltage250 V AC
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Datasheet - PDF

PHOENIX CONTACT-2903274-RIF-4-RPT-LV-120AC/3X1English159 KbytesPHOENIX CONTACT-2903274-RIF-4-RPT-LV-120AC/3X1

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review