RIF-4-RPT-LDP-24DC/3X1 2903275 PHOENIX CONTACT Pre-assembled relay module with push-in connection, consistin.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

RIF-4-RPT-LDP-24DC/3X1 2903275 PHOENIX CONTACT Pre-assembled relay module with push-in connection, consistin..






Ship on today

Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 3 N/O contacts. Input voltage: 24 V DC

More details

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Solid state relays and power electronics. Relay - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

5+17,53 €
15+16,74 €
25+16,46 €
35+16,29 €
45+16,19 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width43 mm
Height111 mm
Depth90 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN24 V DC
Input voltage range in reference to UNsee diagram
Typical input current at UN70 mA
Typical response time20 ms
Typical release time20 ms
Coil voltage24 V DC
Protective circuitDamping diode
Polarity protection diode
Operating voltage displayYellow LED
Power dissipation for nominal condition1.68 W

Contact side

Contact type3 N/O contacts
Contact materialAgNi
Maximum switching voltage440 V AC
250 V DC
Minimum switching voltage10 V (At 24 mA)
Min. switching current10 mA (at 24 V)
Maximum inrush current50 A (20 ms, N/O contact)
Limiting continuous current10 A (see diagram)
Interrupting rating (ohmic load) max.240 W (at 24 V DC)
480 W (at 48 V DC)
600 W (at 60 V DC)
660 W (at 110 V DC)
183 W (at 220 V DC)
2500 VA (for 250 V AC)
4000 VA (At 440 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 609471 A (at 24 V, DC13)
1 A (at 120 V, DC13)
1 A (at 220 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1.5 A (at 240 V, AC15)
Motor load according to UL 5081/3 HP, 120 V AC (single-phase AC motor)
1/2 HP, 240 V AC (single-phase AC motor)
1/2 HP, 240 V AC (three-phase induction motor)

Connection data input side

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve)
Conductor cross section AWG26 ... 16


Test voltage relay winding/relay contact2.5 kVrms (50 Hz, 1 min.)
Test voltage relay contact/relay contact2.5 kVrms (50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionIP20 (Relay socket)
RT I (Relay)
Mechanical service lifeApprox. 107 cycles
Standards/regulationsDIN EN 50178
IEC 62103
Rated insulation voltage250 V AC
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Datasheet - PDF

PHOENIX CONTACT-2903275-RIF-4-RPT-LDP-24DC/3X1English163 KbytesPHOENIX CONTACT-2903275-RIF-4-RPT-LDP-24DC/3X1

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review