RIF-1-RPT-LDP-24DC/2X21AU 2903330 PHOENIX CONTACT Pre-assembled relay module with push-in connection, consis.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

RIF-1-RPT-LDP-24DC/2X21AU 2903330 PHOENIX CONTACT Pre-assembled relay module with push-in connection, consis..

RIF-1-RPT-LDP-24DC/2X21AU

2903330

PHOENIX_CONTACT

10

Available

Ship on today

Pre-assembled relay module with push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 2 PDTs. Input voltage: 24 V DC

More details


INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Solid state relays and power electronics. Relay - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
10+5,41 €
30+5,16 €
50+5,07 €
70+5,02 €
100+4,98 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dimensions

Width16 mm
Height93 mm
Depth75 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN24 V DC
Input voltage range in reference to UNsee diagram
Typical input current at UN18 mA
Typical response time8 ms
Typical release time10 ms
Coil voltage24 V DC
Protective circuitDamping diode
Operating voltage displayYellow LED
Power dissipation for nominal condition0.43 W

Contact side

Contact type2 PDT
Contact materialAgNi, hard gold-plated
Maximum switching voltage30 V AC
36 V DC
Minimum switching voltage100 mV (at 10 mA)
Min. switching current1 mA (at 24 V)
Maximum inrush current50 mA
Limiting continuous current50 mA
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)
Notethe following values are applicable if a gold layer is destroyed
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (at 10 mA)
Limiting continuous current25 A (20 ms, N/O contact)
Min. switching current10 mA (At 5 V)
Interrupting rating (ohmic load) max.192 W (at 24 V DC)
96 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
57 W (at 220 V DC)
2000 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 609472 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 24 V, AC15)
2 A (at 120 V, AC15)
2 A (at 250 V, AC15)

Connection data input side

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve)
Conductor cross section AWG26 ... 16

General

Type of noteNotes on operation
NoteFBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
Test voltage relay winding/relay contact4 kVrms (50 Hz, 1 min.)
Test voltage PDT/PDT2.5 kVrms (50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionIP20 (Relay socket)
RT III (Relay)
Mechanical service lifeApprox. 3 x 107 cycles
Standards/regulationsDIN EN 50178
IEC 62103
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2903330-RIF-1-RPT-LDP-24DC/2X21AUEnglish161 KbytesPHOENIX CONTACT-2903330-RIF-1-RPT-LDP-24DC/2X21AU

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review