Product successfully added to your shopping cart
VAL-SEC-T2-2S-350
2905343
VAL‐CP‐2S‐350/O 2881049
PHOENIX_CONTACT
1
Type 2 surge arrester
Trabtech (TT)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2905343 |
---|---|
Packing unit | 1 pc |
Note | Made to Order (non-returnable) |
Catalog page | Page 47 (C-4-2017) |
GTIN | 4046356948203 |
Weight per Piece (excluding packing) | 222.220 g |
Custom tariff number | 85363030 |
Country of origin | DE (Germany) |
Degree of protection | IP20 |
---|---|
Ambient temperature (operation) | -40 °C ... 80 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | ≤ 2000 m (amsl (above mean sea level)) |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
IEC test classification | II |
---|---|
T2 | |
EN type | T2 |
IEC power supply system | TN-S |
TT | |
Mode of protection | L-N |
L-PE | |
N-PE | |
Mounting type | DIN rail: 35 mm |
Color | light grey RAL 7035 |
traffic grey A RAL 7042 | |
Housing material | PA 6.6-FR 20% GF |
PBT-FR | |
Degree of pollution | 2 |
Flammability rating according to UL 94 | V-0 |
Type | DIN rail module, two-section, divisible |
Number of positions | 3 |
Surge protection fault message | optical |
Nominal voltage UN | 240/415 V AC (TN-S) |
---|---|
240/415 V AC (TT) | |
Nominal frequency fN | 50 Hz (60 Hz) |
Maximum continuous operating voltage UC(L-N) | 350 V AC |
Maximum continuous operating voltage UC(L-PE) | 350 V AC |
Maximum continuous voltage UC(N-PE) | 264 V AC |
Rated load current IL | 40 A (Biconnect M4 fork-type cable lug 6 mm²) |
63 A (TWIN ferrule 2 x 10 mm²) | |
Residual current IPE | ≤ 1 µA |
Nominal discharge current In(8/20) µs | 20 kA |
Maximum discharge current Imax(8/20) µs | 40 kA |
Follow current interrupt rating Ifi(N-PE) | 100 A (264 V AC) |
Short-circuit current rating ISCCR | 25 kA (in case of 315 A gG backup fuse) |
50 kA (in case of 200 A gG backup fuse) | |
Voltage protection level Up(L-N) | ≤ 1.5 kV |
Voltage protection level Up(L-PE) | ≤ 1.9 kV |
Voltage protection level Up(N-PE) | ≤ 1.5 kV |
Residual voltage Ures(L-N) | ≤ 1.5 kV (at In) |
≤ 1.3 kV (at 10 kA) | |
≤ 1.2 kV (at 5 kA) | |
≤ 1.1 kV (at 4 kA) | |
≤ 1 kV (at 2 kA) | |
Residual voltage Ures(N-PE) | ≤ 0.5 kV (at In) |
≤ 0.5 kV (at 10 kA) | |
≤ 0.5 kV (at 5 kA) | |
≤ 0.5 kV (at 4 kA) | |
≤ 0.5 kV (at 2 kA) | |
TOV behavior at UT(L-N) | 415 V AC (5 s / withstand mode) |
457 V AC (120 min / safe failure mode) | |
TOV behavior at UT(N-PE) | 1200 V AC (200 ms / withstand mode) |
Response time tA(L-N) | ≤ 25 ns |
Response time tA(L-PE) | ≤ 100 ns |
Response time tA(N-PE) | ≤ 100 ns |
Max. backup fuse with V-type through wiring | 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²) |
63 A (gG / TWIN ferrule 2x 10mm²) | |
Max. backup fuse with branch wiring | 315 A (gG) |
Connection method | Screw connection |
---|---|
Screw thread | M5 |
Tightening torque | 4.5 Nm |
Stripping length | 16 mm |
Conductor cross section flexible | 2.5 mm² ... 16 mm² |
Conductor cross section solid | 2.5 mm² ... 25 mm² |
Conductor cross section AWG | 12 ... 4 |
Connection method | Fork-type cable lug |
Conductor cross section flexible | 1.5 mm² ... 6 mm² |
SPD Type | 4CA |
---|---|
Maximum continuous operating voltage MCOV (L-L) | 700 V AC |
Maximum continuous operating voltage MCOV (L-N) | 350 V AC |
Maximum continuous operating voltage MCOV (L-G) | 350 V AC |
Maximum continuous operating voltage MCOV (N-G) | 264 V AC |
Nom. voltage | 240/415 V AC |
Mode of protection | L-L |
L-N | |
L-G | |
N-G | |
Power distribution system | Wye |
Nominal frequency | 50/60 Hz |
Measured limiting voltage MLV (L-L) | 3280 V |
Measured limiting voltage MLV (L-N) | 2000 V |
Measured limiting voltage MLV (L-G) | 2080 V |
Measured limiting voltage MLV (N-G) | 950 V |
Nominal discharge current In(L-L) | 20 kA |
Nominal discharge current In(L-N) | 20 kA |
Nominal discharge current In(L-G) | 20 kA |
Nominal discharge current In(N-G) | 20 kA |
Conductor cross section AWG | 14 ... 2 (solid) |
---|---|
14 ... 4 (flexible) | |
Tightening torque | 40 lbf-in. ... 50 lbf-in. |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX PROTECTION EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2905343-VAL-SEC-T2-2S-350 | 129 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.